Product Specification 43 GHz Balanced Photodetector BPDV21x0R PRODUCT FEATURES 43 GHz bandwidth with flat response Excellent pulse behavior Unsurpassed high-power handling capability Integrated 50 Ω termination Unique on-chip integrated bias network APPLICATIONS 40/43 Gb/s DQPSK optical communication systems Advanced Test & Measurement systems High speed optical sensoring The balanced photodetector consists of two optimized, waveguide-integrated photodiodes on one single chip. As a single balanced photodetector, this configuration ensures an excellent uniformity of the paired photodiodes and is biased via integrated biasing network. Due to optimized combination of waveguide and PD design, even at high optical powers, a linear frequency response can be guaranteed. The integrated 50 Ω termination allows an excellent match of the electrical output signal. Customized configurations are available, such as BPDV dual pair -and quad sets, including fiber matching and connector customization. ORDERING INFORMATION BPDV21x0Rv-Vy-zz x: Rv: Vy: zz: 2 5 R RM RQ VF VM FP = standard PDL = low PDL = single balanced detector = dual pair of balanced detectors = quad set of balanced detectors = female V® connector (standard) = male V® connector = FC/PC connector (standard) Customized configurations upon request Confidential and Proprietary © 2015 Finisar Corporation. All rights reserved Rev. A1 Page 1 43 GHz Balanced Photodetector I. Pin Description II. Block Diagram III. Absolute Maximum Ratings Notice Confidential and Proprietary © 2014 Finisar Corporation. All rights reserved Rev. A2 Page 2 43 GHz Balanced Photodetector IV. V. Environmental Conditions Operating Conditions VI. Electro-Optical Specifications1 1. Confidential and Proprietary © 2014 Finisar Corporation. All rights reserved Rev. A2 Page 3 43 GHz Balanced Photodetector VII. Typical Performance Curves Frequency Response VIII. Pulse Response Mechanical Specifications All Dimensions in mm Confidential and Proprietary © 2014 Finisar Corporation. All rights reserved Rev. A2 Page 4 43 GHz Balanced Photodetector IX. Accessories Evaluation Kit The kit serves as easy-to-use utility to characterize the balanced photodetector under laboratory conditions and contents of a printed circuit board (PCB), four screws to establish removable connectivity between photodetector and board, as one DC cable to ensure the photodiode bias voltage. ORDERING INFORMATION EVA-BPDV Evaluation board for all balanced detectors; includes 1x PCB, 1x DC cable set and 4x socket head screws 4-40 UNC Photodetector Power Supply We recommend usage of our individually accessible photodetector power supply (PPS), in particular for optimized performance at high optical input levels. As portable device it provides stable biasing voltage supply and a front display for review on photocurrent. ORDERING INFORMATION PPS-03-B Photodetector power supply for all balanced detectors; includes 2x PPS, 1x cable-set B-type. The PPS is compatible with EVA-board (specified scheme applicable to RM & RQ version). PPS units include 2x 1.5V batteries Confidential and Proprietary © 2014 Finisar Corporation. All rights reserved Rev. A2 Page 5 43 GHz Balanced Photodetector X. Revision History Notes Any trademarks used in this document are properties of their respective owners. Finisar Corporation reserves the right to make changes without notice. For More Information Finisar Corporation 1389 Moffett Park Drive Sunnyvale, CA 94089-1133 Tel. 1-408-548-1000 Fax 1-408-541-6138 [email protected] www.finisar.com Confidential and Proprietary © 2014 Finisar Corporation. All rights reserved Rev. A2 Page 6