S Series 100 Watt DC-DC Converters Wide input voltage ranges from 8...385 V DC 1or 2 isolated outputs up to 48 V DC 4 kV AC I/O electric strengh test voltage LGA • Rugged electrical and mechanical design • Fully isolated outputs • Operating ambient temperature range –40...71°C with convection cooling Selection chart Output 1 Uo nom Io nom [V DC] [A] 5.1 16 12 8 15 6.5 24 4.2 24 4 30 3.2 48 2 12 4 15 3.2 24 2 Output 2 Uo nom Io nom [V DC] [A] 12 4 15 3.2 24 2 Type Input Voltage 8...35 V DC AS 1001-7R AS 1301-7R AS 1501-7R AS 1601-7R AS 2320-7R AS 2540-7R AS 2660-7R AS 2320-7R AS 2540-7R AS 2660-7R Type Input Voltage 14...70 V DC BS 1001-7R BS 1301-7R BS 1501-7R BS 1601-7R BS 2320-7R BS 2540-7R BS 2660-7R BS 2320-7R BS 2540-7R BS 2660-7R Type Input Voltage 20...100 V DC FS 1001-7R FS 1301-7R FS 1501-7R FS 1601-7R FS 2320-7R FS 2540-7R FS 2660-7R FS 2320-7R FS 2540-7R FS 2660-7R Output 1 Uo nom Io nom [V DC] [A] 5.1 16 12 8 15 6.5 24 4.2 24 4 30 3.2 48 2 12 4 15 3.2 24 2 Output 2 Uo nom Io nom [V DC] [A] 12 4 15 3.2 24 2 Type Input Voltage 28...140 V DC CS 1001-7R CS 1301-7R CS 1501-7R CS 1601-7R CS 2320-7R CS 2540-7R CS 2660-7R CS 2320-7R CS 2540-7R CS 2660-7R Type Input Voltage 44...220 V DC DS 1001-7R DS 1301-7R DS 1501-7R DS 1601-7R DS 2320-7R DS 2540-7R DS 2660-7R DS 2320-7R DS 2540-7R DS 2660-7R Type Input Voltage 67...385 V DC ES 1001-7R ES 1301-7R ES 1501-7R ES 1601-7R ES 2320-7R ES 2540-7R ES 2660-7R ES 2320-7R ES 2540-7R ES 2660-7R www.power-one.com Options -9, E, D, V, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 Options -9, E, D, V, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 1 Cassette Style S Series Input Input voltage Inrush current limitation 6 wide-input ranges (1:5) FS, CS, DS, ES by thermistor refer to selection chart Output Efficiency Output voltage setting accuracy Output voltage switching noise Line regulation Load regulation Minimum load Current limitation Operation in parallel Hold-up time Ui nom, Io nom up to 86% Ui nom, Io nom ±0.6% Uo nom IEC/EN 61204, total typ. 100 mVpp Ui min…Ui max, Io nom typ. ±0.3% Uo nom Ui nom, 10...100% Io nom, symmetrical output load typ. 0.4% Uo nom not required 0A rectangular U/I characteristic typ. 110% Io nom by current limitation Ui nom, Io nom, CS/DS/ES/FS with ext. diode in input line 12...40 ms Ui nom, Io nom, AS/BS with ext. diode in input line typ. 1.8 ms Control and protection Input reverse polarity Input undervoltage lockout Input overvoltage lockout Input transient protection Output Output overvoltage Overtemperature Output voltage adjustment Inhibit Status indication built-in fuse not user accessible typ. 80% Ui min typ. 108% Ui max varistor or suppressor diode no-load, overload and short circuit proof suppressor diode in each output switch-off with auto restart typ. 130% Uo nom TC typ. 100°C 0...110% Uo nom TTL input, output(s) disabled if open circuit LEDs: OK, inhibit, overload Safety Approvals Class of equipment Protection degree Electric strength test voltage EN 60950, UL 1950, CSA 22.2 No. 950 I/case I/O O/case O/O class I IP 30 2 kV AC 4 kV AC 1 kV AC 0.1 kV AC IEC/EN 61000-4-2, level 4 (8/15 kV) IEC/EN 61000-4-3, level x (20 V/m) IEC/EN 61000-4-4, level 4 (2/4 kV) IEC/EN 61000-4-5, level 3 (2 kV) IEC/EN 61000-4-6, level 3 (10 V) CISPR 22/EN 55022, conducted criterion A criterion A criterion A criterion A criterion A class B EMC Electrostatic discharge Electromagnetic field Electr. fast transients/bursts Surge Conducted disturbances Electromagnetic emissions www.power-one.com 2 S Series 100 Watt DC-DC Converters Environmental Operating ambient temperature Operating case temperature TC Storage temperature Damp heat Vibration, sinusoidal Shock Bump Random vibration MTBF Ui nom, Io nom, convection cooled Ui nom, Io nom non operational IEC/EN 60068-2-3, 93 %, 40 °C IEC/EN 60068-2-6, 10...60/60...2000 Hz IEC/EN 60068-2-27, 6 ms IEC/EN 60068-2-29, 6 ms IEC/EN 60068-2-64, 20...500 Hz MIL-HDBK-217F, GB, 40°C –25...71°C –25...95°C –40...100°C 56 days 0.35 mm/5 gn 100 gn 40 gn 4.9 gn rms 500'000 h Options Extended temperature range –40...71°C, ambient, operating Electronic inrush current limitation Output voltage adjustment 40...110% Uo nom, excludes feature R and vice versa Input and/or output undervoltage monitoring, excludes option V Input and/or output undervoltage monitoring (VME), excludes option D Current sharing Cooling plate -9 E P D0…D9 V0, V2, V3 T B1 Pin allocation Pin 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Vo1+ Vo1+ Vo1– Vo1– S+ S– R i D V T Vi+ Vi+ Vi– Vi– AS...ES 1000 Output 1 Vo2+ Vo2+ Vo2– Vo2– Vo1+ Vo1– R i D Output 1 Sense Sense Control of Uo1 Inhibit Save data ACFAIL Current sharing Protective earth Input T Vi+ Vi+ Vi– Vi– Input AS...ES 2000 Output 2 Output 2 Output 1 Control of Uo1 Inhibit Save data Current sharing Protective earth Input Input S10002 30 26 22 18 14 10 32 28 24 20 16 12 www.power-one.com 6 8 4 3 Cassette Style S Series Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. European Projection 171.93 (DIN 41494) (6.77") 7 TE 5 TE Test jacks Option P (Uo) Option D (Uto) Option D (Uti) 111 (3U) 4.37") Measuring point of case temperature TC 100 (3.93") M4 152 (5.98") LED i LED OK LED IoL 168.5 (6.63") 25.9 (1.02") 09004 11.8 (0.46") 60 (2.36") Accessories Front panels 19" (Schroff/Intermas) Mating H15 connectors with screw, solder, fast-on or press-fit terminals Connector retention facilities and code key system for connector coding Chassis or wall mounting plates for frontal access Universal mounting brackets for chassis or DIN-rail mounting www.power-one.com 4