PRODUCT DATASHEET Florentina series last update 23/1/2018 DETAILS Product Number FC15354_FLORENTINA-4X1-W Family Florentina Type Pack Color black Diameter 175,57x55,57 mm Height 17,72 mm Style rectang Optic Material PC Holder Material Fastening pin, screw Status production ready ROHS Compliant Yes Date Updated 23/01/2018 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector NVSxx19B/NVSxx19C 39 deg Wide 72 % 1.400 - Oslon Square Gen3 36 deg Wide 69 % 1.500 - January 25th 2018 8:09 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H Dotted line is recomenden cut out when recessed 1 4 4 50 40 3.2 175.57 40 2 3 Optional attachment 1 40 80 120 3 3 Optional side attachment 2 Isometric view Scale: 3:4 40 Assembly: 2 1. Attach lenses by pressing them down until they snap into place. 2. Screw the holder (with lenses assembled) to PCB. Inspect that the positioning pins are securely in their holes. 3. Press the shade down on the holder until they are securely attached. Optional side attachment: The holder can also be attached with DIN 7985 M3 nuts 1. One nut per side for rotational attachment 2. Two per side for fixed beam direction 2 2 Recommendations: 55.57 Screw type DIN 7985 M3, max. torque 0.6Nm INDEX PART NO DESCRIPTION MATERIAL COLOUR Bottom view 1 2 3 31.17 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L 16.88 1.25 1 THIRD ANGLE PROJECTION: Front view This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. G FLORENTINA-4X1-SHD FLORENTINA-4X1-HLD CMC / MRK lenses PC PC black black Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE FLORENTINA-4x1 assembly SIZE 1 PART NUMBER A3 SCALE H C15028 C15029 - 1:1 WEIGHT 58 g B SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.