ON MPSA56RLRP Amplifier transistor Datasheet

MPSA05, MPSA06, MPSA55,
MPSA56
MPSA06 and MPSA56 are Preferred Devices
Amplifier Transistors
Voltage and Current are Negative
for PNP Transistors
http://onsemi.com
PNP
NPN
NPN
MPSA05, MPSA06
PNP
MPSA55, MPSA56
COLLECTOR
3
COLLECTOR
3
2
BASE
2
BASE
STYLE 1
MPSA05, MPSA06
MARKING DIAGRAM
1
EMITTER
1
EMITTER
TO−92
CASE 29
STYLE 1
STYLE 1
MPSA55, MPSA56
MPS
Axxx
YWW
MAXIMUM RATINGS
Rating
Symbol
Collector −Emitter Voltage
MPSA05, MPSA55
MPSA06, MPSA56
VCEO
Collector −Base Voltage
MPSA05, MPSA55
MPSA06, MPSA56
VCBO
Emitter −Base Voltage
VEBO
4.0
Vdc
Collector Current − Continuous
IC
500
mAdc
Total Device Dissipation
@ TA = 25°C
Derate above 25°C
PD
625
5.0
mW
mW/°C
Total Device Dissipation
@ TC = 25°C
Derate above 25°C
PD
1.5
12
Watts
mW/°C
−55 to
+150
°C
Operating and Storage Junction
Temperature Range
Value
Unit
Vdc
2
3
60
80
TJ, Tstg
Device
Symbol
Max
Unit
Thermal Resistance,
Junction to Ambient
RθJA
(Note 1.)
200
°C/W
Thermal Resistance,
Junction to Case
RθJC
83.3
°C/W
1. RJA is measured with the device soldered into a typical printed circuit board.
= Specific Device Code
= 05, 06, 55 or 56
= Year
= Work Week
ORDERING INFORMATION
Vdc
60
80
THERMAL CHARACTERISTICS
Characteristic
MPSA
xxx
Y
WW
1
Package
Shipping
MPSA05
TO−92
5000 Units/Box
MPSA05RLRA
TO−92
2000/Tape & Reel
MPSA05RLRM
TO−92
2000/Ammo Pack
MPSA06
TO−92
5000 Units/Box
MPSA06RLRA
TO−92
2000/Tape & Reel
MPSA06RLRM
TO−92
2000/Ammo Pack
MPSA06RLRP
TO−92
2000/Ammo Pack
MPSA55
TO−92
5000 Units/Box
MPSA55RLRA
TO−92
2000/Tape & Reel
MPSA56
TO−92
5000 Units/Box
MPSA56RLRA
TO−92
2000/Tape & Reel
MPSA56RLRM
TO−92
2000/Ammo Pack
MPSA56RLRP
TO−92
2000/Ammo Pack
Preferred devices are recommended choices for future use
and best overall value.
 Semiconductor Components Industries, LLC, 2001
October, 2001 − Rev. 1
1
Publication Order Number:
MPSA05/D
MPSA05, MPSA06, MPSA55, MPSA56
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
Unit
60
80
−
−
V(BR)EBO
4.0
−
Vdc
ICES
−
0.1
µAdc
−
−
0.1
0.1
100
100
−
−
OFF CHARACTERISTICS
Collector −Emitter Breakdown Voltage (Note 2.)
(IC = 1.0 mAdc, IB = 0)
V(BR)CEO
Vdc
MPSA05, MPSA55
MPSA06, MPSA56
Emitter −Base Breakdown Voltage (IE = 100 µAdc, IC = 0)
Collector Cutoff Current (VCE = 60 Vdc, IB = 0)
Collector Cutoff Current
(VCB = 60 Vdc, IE = 0)
(VCB = 80 Vdc, IE = 0)
µAdc
ICBO
MPSA05, MPSA55
MPSA06, MPSA56
ON CHARACTERISTICS
DC Current Gain
(IC = 10 mAdc, VCE = 1.0 Vdc)
(IC = 100 mAdc, VCE = 1.0 Vdc)
hFE
−
Collector −Emitter Saturation Voltage
(IC = 100 mAdc, IB = 10 mAdc)
VCE(sat)
−
0.25
Vdc
Base−Emitter On Voltage
(IC = 100 mAdc, VCE = 1.0 Vdc)
VBE(on)
−
1.2
Vdc
100
−
50
−
SMALL−SIGNAL CHARACTERISTICS
Current −Gain − Bandwidth Product (Note 3.)
(IC = 10 mA, VCE = 2.0 V, f = 100 MHz)
fT
MHz
MPSA05
MPSA06
MPSA55
MPSA56
(IC = 100 mAdc, VCE = 1.0 Vdc, f = 100 MHz)
2. Pulse Test: Pulse Width 300 s, Duty Cycle 2%.
3. fT is defined as the frequency at which |hfe| extrapolates to unity.
TURN−ON TIME
5.0 s
100
VCC
+VBB
+40 V
+40 V
RL
100
OUTPUT
+10 V
tr = 3.0 ns
RB
Vin
* CS 6.0 pF
5.0 F
RL
OUTPUT
RB
Vin
0
TURN−OFF TIME
VCC
−1.0 V
* CS 6.0 pF
5.0 F
100
100
5.0 s
tr = 3.0 ns
*Total Shunt Capacitance of Test Jig and Connectors
For PNP Test Circuits, Reverse All Voltage Polarities
Figure 1. Switching Time Test Circuits
http://onsemi.com
2
MPSA05, MPSA06, MPSA55, MPSA56
PNP
f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz)
f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz)
NPN
300
200
VCE = 2.0 V
TJ = 25°C
200
100
100
70
50
30
2.0
3.0
5.0 7.0 10
20
30
50
70 100
200
−5.0 −7.0 −10
−20 −30
−50 −70 −100
−200
100
TJ = 25°C
TJ = 25°C
70
C, CAPACITANCE (pF)
50
Cibo
10
8.0
Cobo
6.0
4.0
0.1
0.2
0.5
1.0
2.0
5.0
10
Cibo
30
20
Cobo
10
7.0
20
50
5.0
−0.1 −0.2
100
−0.5 −1.0
−2.0
−5.0
−10 −20
−50 −100
VR, REVERSE VOLTAGE (VOLTS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 4. MPSA05/06 Capacitance
Figure 5. MPSA55/56 Capacitance
1.0 k
700
500
1.0 k
700
500
ts
300
200
100
70
50
tf
VCC = 40 V
IC/IB = 10
IB1 = IB2
TJ = 25°C
5.0 7.0 10
50
70 100
100
70
50
20
td @ VBE(off) = 0.5 V
30
200
30
tr
20
ts
300
t, TIME (ns)
C, CAPACITANCE (pF)
20
−2.0 −3.0
Figure 3. MPSA55/56 Current−Gain —
Bandwidth Product
20
10
30
Figure 2. MPSA05/06 Current−Gain —
Bandwidth Product
40
20
50
IC, COLLECTOR CURRENT (mA)
60
30
70
IC, COLLECTOR CURRENT (mA)
80
t, TIME (ns)
VCE = −2.0 V
TJ = 25°C
200 300
tf
VCC = −40 V
IC/IB = 10
IB1 = IB2
TJ = 25°C
10
−5.0 −7.0 −10
500
td @ VBE(off) = −0.5 V
−20 −30
−50 −70 −100
tr
−200 −300
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 6. MPSA05/06 Switching Time
Figure 7. MPSA55/56 Switching Time
http://onsemi.com
3
−500
MPSA05, MPSA06, MPSA55, MPSA56
NPN
PNP
−1.0 k
−700
−500
100 s
1.0 ms
300
20
10
1.0
MPSA05
2.0
3.0
5.0 7.0 10
TA = 25°C
−100
−70
−50
CURRENT LIMIT
THERMAL LIMIT
SECOND BREAKDOWN LIMIT
30
1.0 s
TC = 25°C
−200
TA = 25°C
100
70
50
100 s
1.0 ms
−300
1.0 s
TC = 25°C
200
I C , COLLECTOR CURRENT (mA)
I C , COLLECTOR CURRENT (mA)
1.0 k
700
500
MPSA06
20
50
30
−20
−10
70 100
CURRENT LIMIT
THERMAL LIMIT
SECOND BREAKDOWN LIMIT
−30
MPSA55
−1.0
−2.0 −3.0
−5.0 −7.0 −10
MPSA56
−20 −30
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
Figure 8. MPSA05/06 Active−Region Safe
Operating Area
Figure 9. MPSA55/56 Active−Region Safe
Operating Area
400
400
TJ = 125°C
TJ = 125°C
VCE = −1.0 V
25°C
−55°C
100
80
60
1.0
1.0
2.0 3.0 5.0
10
20 30
50
100
200
25°C
−55°C
100
80
60
40
−0.5 −1.0 −2.0
200 300 500
−20
−50
−100 −200
IC, COLLECTOR CURRENT (mA)
Figure 10. MPSA05/06 DC Current Gain
Figure 11. MPSA55/56 DC Current Gain
−1.0
TJ = 25°C
VBE(on) @ VCE = 1.0 V
0.4
0.2
−500
TJ = 25°C
−0.8
VBE(sat) @ IC/IB = 10
0.6
VBE(sat) @ IC/IB = 10
−0.6
VBE(on) @ VCE = −1.0 V
−0.4
−0.2
VCE(sat) @ IC/IB = 10
0
0.5
−5.0 −10
IC, COLLECTOR CURRENT (mA)
0.8
V, VOLTAGE (VOLTS)
h FE, DC CURRENT GAIN
200
V, VOLTAGE (VOLTS)
h FE , DC CURRENT GAIN
VCE = 1.0 V
40
0.5
−50 −70 −100
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
1.0
2.0
5.0
VCE(sat) @ IC/IB = 10
10
20
50
100
200
0
−0.5
500
−1.0 −2.0
−5.0
−10
−20
−50
−100 −200
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 12. MPSA05/06 “ON” Voltages
Figure 13. MPSA55/56 “ON” Voltages
http://onsemi.com
4
−500
MPSA05, MPSA06, MPSA55, MPSA56
PNP
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
NPN
1.0
TJ = 25°C
0.8
IC =
250 mA
IC =
100 mA
IC =
50 mA
IC =
500 mA
0.6
0.4
IC =
10 mA
0.2
0
0.05
0.2
0.1
0.5
2.0
1.0
5.0
10
20
IC =
−250 mA
IC =
−100 mA
IC =
−50 mA
IC =
−500 mA
−0.6
−0.4
IC =
−10 mA
−0.2
0
−0.05 −0.1 −0.2
−0.5
−1.0
−2.0
−5.0
−10
−20
IB, BASE CURRENT (mA)
Figure 14. MPSA05/06 Collector Saturation
Region
Figure 15. MPSA55/56 Collector Saturation
Region
R VB , TEMPERATURE COEFFICIENT (mV/° C)
R VB , TEMPERATURE COEFFICIENT (mV/ °C)
−1.6
RVB for VBE
−2.0
−2.4
−2.8
0.5
r(t), NORMALIZED TRANSIENT
THERMAL RESISTANCE
−0.8
IB, BASE CURRENT (mA)
−1.2
1.0
2.0
5.0
10
20
50
100
200
500
−50
−0.8
−1.2
−1.6
RVB for VBE
−2.0
−2.4
−2.8
−0.5 −1.0 −2.0
−5.0
−10
−20
−50
−100 −200
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 16. MPSA05/06 Base−Emitter
Temperature Coefficient
Figure 17. MPSA55/56 Base−Emitter
Temperature Coefficient
−500
D = 0.5
0.3
0.2
0.2
0.1
0.05
0.1
0.07
0.05
TJ = 25°C
50
−0.8
1.0
0.7
0.5
−1.0
0.02
SINGLE PULSE
ZθJC(t) = r(t) • RθJC
TJ(pk) − TC = P(pk) ZθJC(t)
ZθJA(t) = r(t) • RθJA
TJ(pk) − TA = P(pk) ZθJA(t)
D CURVES APPLY FOR
POWER PULSE TRAIN
SHOWN READ TIME AT t1
(SEE AN469)
P(pk)
0.01
t1
SINGLE PULSE
0.03
t2
0.02
DUTY CYCLE, D = t1/t2
0.01
1.0
2.0
5.0
10
20
50
100
200
500
1.0 k
2.0 k
5.0 k
10 k
t, TIME (ms)
Figure 18. MPSA05, MPSA06, MPSA55 and MPSA56 Thermal Response
http://onsemi.com
5
20 k
50 k 100 k
MPSA05, MPSA06, MPSA55, MPSA56
PACKAGE DIMENSIONS
TO−92
TO−226AA
CASE 29−11
ISSUE AL
A
B
R
P
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
L
SEATING
PLANE
K
DIM
A
B
C
D
G
H
J
K
L
N
P
R
V
D
X X
G
J
H
V
C
SECTION X−X
1
N
N
INCHES
MIN
MAX
0.175
0.205
0.170
0.210
0.125
0.165
0.016
0.021
0.045
0.055
0.095
0.105
0.015
0.020
0.500
−−−
0.250
−−−
0.080
0.105
−−−
0.100
0.115
−−−
0.135
−−−
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
http://onsemi.com
6
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.407
0.533
1.15
1.39
2.42
2.66
0.39
0.50
12.70
−−−
6.35
−−−
2.04
2.66
−−−
2.54
2.93
−−−
3.43
−−−
STYLE 14:
PIN 1. EMITTER
2. COLLECTOR
3. BASE
MPSA05, MPSA06, MPSA55, MPSA56
Notes
http://onsemi.com
7
MPSA05, MPSA06, MPSA55, MPSA56
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
JAPAN: ON Semiconductor, Japan Customer Focus Center
4−32−1 Nishi−Gotanda, Shinagawa−ku, Tokyo, Japan 141−0031
Phone: 81−3−5740−2700
Email: [email protected]
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
N. American Technical Support: 800−282−9855 Toll Free USA/Canada
http://onsemi.com
8
MPSA05/D
Similar pages