BAT48-60 Surface Mount High Current Density Schottky Rectifiers 1.0 Amp 60V Features • Guarding protection • Low forward voltage • Reverse energy tested • High current capability • Extremely low thermal resistance • RoHS compliant package Mechanical Data • Case: SOD-323 Molded plastic • Epoxy: UL94V-O rate flame retardant • Lead: Lead Formed for Surface Mount • Polarity: Color band denotes cathode end • Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol BAT-60 Unit Maximum repetitive peak reverse voltage VRRM 60 V Working peak reverse voltage VRWM 42 V Maximum DC blocking voltage VDC 60 V IF(AV) 1.0 A TJ -55 to +150 °C TSTG -55 to +150 °C Symbol BAT-60 Unit Maximum average forward rectified current Operating junction temperature range Storage temperature range Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) 10 IFSM A 1pulse/4S t=500us exponent wave 60 Note: (1) Mounted on 30 mm x 30 mm Al P.C.B. with 50 mm x 25 mm x 100 mm fin heat sink (2) Free air, mounted on recommended copper pad area Publication Order Number: BAT48-60 ©Bruckewell Technology Corporation Rev. A -2015 BAT48-60 Surface Mount High Current Density Schottky Rectifiers 1.0 Amp 60V Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Symbol Value Typical Max Instantaneous forward voltage at IF=200mA, Tj=25°C 0.37 0.69 IF=500mA, Tj=25°C 0.47 0.50 0.63 0.69 IF=200mA, Tj=125°C 0.28 0.31 IF=500mA, Tj=125°C 0.46 0.49 IF=1.0A, Tj=125°C 0.62 0.68 IF=1.0A, Tj=25°C VF Maximum reverse current per leg Unit V 100 u’A 20 m’A Symbol Value Unit RθJA 88 °C/W RθJC 30 °C/W Tj=25°C IR at working peak reverse voltage Tj=100°C Thermal characteristics (Tc=25°C unless otherwise noted) Parameter Typical thermal resistance Notes: (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms Publication Order Number: BAT48-60 ©Bruckewell Technology Corporation Rev. A -2015 BAT48-60 Surface Mount High Current Density Schottky Rectifiers 1.0 Amp 60V ■RATINGS AND CHARACTERISTIC CURVES FIG. 1- TYPICAL FORWARD CURRENT DERATING CURVE FIG. 2- TYPICAL MAXIMUM NON-REPETIVE SURGE FIG. 3- TYPICAL FORWARD INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG FIG. 4- TYPICAL REVERSE CHARACTERISTICS FIG. 5- TYPICAL JUNCTION CAPACITANCE Publication Order Number: BAT48-60 ©Bruckewell Technology Corporation Rev. A -2015 BAT48-60 Surface Mount High Current Density Schottky Rectifiers 1.0 Amp 60V Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: BAT48-60 ©Bruckewell Technology Corporation Rev. A -2015