DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM AlInGaP : DWx TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > High brightness surface mount LED using thin film technology. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Viewing Angle˚ Color Luminous Intensity @ IF = 50mA IV (mcd) Min. Typ. Max. DWS-SJS-ST2-1 Super Red, 632nm 120 180.0 285.0 450.0 DWS-SJS-T2V1-1 Super Red, 632nm 120 355.0 560.0 900.0 DWR-SJS-TU2-1 Red, 625nm 120 285.0 450.0 715.0 DWR-TJS-UV2-1 Red, 625nm 120 450.0 715.0 1125.0 DWR-TJS-VW2-1 Red, 625nm 120 715.0 1125.0 1800.0 DWA-SJS-UV2-1 Amber, 615nm 120 450.0 715.0 1125.0 DWA-SJS-VW1-1 Amber, 615nm 120 715.0 1000.0 1400.0 DWO-SJS-UV2-1 Orange, 605nm 120 450.0 715.0 1125.0 DWY-SJS-UV1-1 Yellow, 587nm 120 450.0 560.0 900.0 DWY-SJS-U2V-1 Yellow, 587nm 120 560.0 900.0 1125.0 DWY-TJS-UV2-1 Yellow, 587nm 120 450.0 715.0 1125.0 DWP-SJS-PQ1-1 Pure Green, 560nm 120 45.0 56.0 90.0 DWP-SJS-P2R1-1 Pure Green, 560nm 120 56.0 90.0 140.0 DWP-SJS-Q2R-1 Pure Green, 560nm 120 90.0 135.0 180.0 Not for new design NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups may also be available upon request. 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. An optional Vf bining is also available upon request. Bining scheme is as per following table. Electrical Characteristics at Tj=25˚C Vf @ If = 50mA Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10uA Min. (V) DWS-SJS, DWR-SJS, DWA-SJS, DWO-SJS, DWY-SJS, DWP-SJS 1.7 2.1 2.6 12 DWR-TJS, DWY-TJS 1.7 2.6 3.2 12 Part Number Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. 2 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Absolute Maximum Ratings Maximum Value Unit DC forward current 70 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA Reverse voltage 12 V ESD threshold (HBM) 2 kV 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 225 mW LED junction temperature Power dissipation (at room temperature) Wavelength Grouping Color Group Wavelength distribution (nm) DWS; Super Red Full 625 - 640 DWR-SJ; Red Full 620 - 630 DWR-TJ; Red (TS) Full 620 - 635 DWA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 600 - 612 W 600 - 603 X 603 - 606 Y 606 - 609 Z 609 - 612 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 DWO; Orange DWY; Yellow DWP; Pure Green Full 552.5 - 564.5 W 552.5 - 555.5 X 555.5 - 558.5 Y 558.5 - 561.5 Z 561.5 - 564.5 Dominant wavelength is measured with an accuracy of ± 1 nm. 3 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group P1 45.0 ... 56.0 P2 56.0 ... 71.5 Q1 71.5 ... 90.0 Q2 90.0 ... 112.5 R1 112.5 ... 140.0 R2 140.0 ... 180.0 S1 180.0 ... 224.0 S2 224.0 ... 285.0 T1 285.0 ... 355.0 T2 355.0 ... 450.0 U1 450.0 ... 560.0 U2 560.0 ... 715.0 V1 715.0 ... 900.0 V2 900.0 ... 1125.0 W1 1125.0 ... 1400.0 W2 1400.0 ... 1800.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Bining (Optional) Vf @ If = 50mA Forward Voltage (V) 50 1.7 ... 2.0 51 2.0 ... 2.3 52 2.3 ... 2.6 53 2.6 ... 2.9 54 2.9 ... 3.2 Forward voltage, Vf is measured with an accuracy of ± 0.1V. Please consult sales and marketing for special part number to incorporate Vf binning. 4 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Forward Voltage Current Current Vs Forward Voltage Relative Luminous Intensity Vs Forward Current Relative Intensity Vs Forward Current 2.3 70 Forward Current, Forward Voltage; V mA Relative Relative Intensity; Intensity; Normalized Normalized at at 50mA 50mA 1.6 1.4 1.4 1.2 1.2 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 60 2.2 AS AllnGaP 50 2.1 40 30 2 TS AllnGaP 20 1.9 10 1.8 0 0 0 10 20 30 40 50 60 70 80 0 1.5 20 2 40 2.5 60 80 3 Current, mA Forward Current; Forward ForwardCurrent, Voltage;mA V Maximum Current Vs Ambient Temperature Relative Intensity Vs Wavelength Relative Intensity Allowable Forward Current, mA 80 Forward Forward Current, Current, mA mA 70 60 50 40 30 20 10 1000 1 0.9 0.8 0.7 100 0.6 Orange Yellow Amber Pure Green Red 0.5 0.4 10 0.3 Super Red 0.2 0.1 1 0 0 0 10 20 30 40 50 60 70 80 90 100 1 500 550 600 10 650 700 100 750 Duty Ratio, % Wavelength; nm Ambient Temperature Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 5 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Power DomiLED • AllnGaP : DWx Package Outlines TM 0.7±0.1 Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn Plating 6 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Recommended Solder Pad 7 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 8 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Packaging Specification 9 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 10 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 04/09/2014 V18.0 DOMINANT TM AlInGaP : DWx Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification 2 Add new partno: DWS-SJS-T2V1-1 09 Dec 2008 2 Add new partno: DWA-SJS-VW1-1 19 Jan 2009 2 Add new partno: DWY-SJS-U2V-1 09 Sep 2009 - Update company name 15 Mar 2010 2 Add Vf min value 01 Dec 2010 2 Add new partno: DWP-SJS-P2R1-1 28 Feb 2011 2 Not for new design : DWA-SJS-VW1-1 26 Apr 2011 2 Add new partno: DWP-SJS-Q2R-1 10 Aug 2011 5 Update Graph: Relative Luminous Intensity Vs Forward Current 29 Dec 2011 6 Update Package Outline 04 Sep 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Tecnologies. 12 04/09/2014 V18.0 DOMINANT TM Opto Technologies AlInGaP : DWx Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM