HN1D02FE TOSHIBA Diode Silicon Epitaxial Planar Type HN1D02FE Ultra High Speed Switching Application Unit in mm z The HN1D02FU is composed of 2 common cathode units. z Low forward voltage : VF (3) = 0.90V (typ.) z Fast reverse recovery time : trr = 1.6ns (typ.) z Small total capacitance : CT = 0.9pF (typ.) Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit VRM 85 V Reverse voltage VR 80 V Maximum (peak) forward current IFM 300* mA Average forward current IO 100* mA IFSM 2* A Power dissipation P 100** mW Junction temperature Tj 150 °C Storage temperature Tstg −55~150 °C Maximum (peak) reverse voltage Surge current (10ms) 1. 2. 3. 4. 5. 6. ANODE ANODE CATHODE ANODE ANODE CATHODE ― JEDEC ― JEITA 1-2X1B TOSHIBA Weight: 0.003g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). *: These are the Absolute Maximum Ratings for a single diode (Q1, Q2, Q3 or Q4). Where Unit 1 and Unit 2 are used independently or simultaneously, the Absolute Maximum Ratings per diode are 75% of those for a single diode. **: Total rating. Electrical Characteristics (Q1, Q2, Q3, Q4 Common; Ta = 25°C) Symbol Test Circuit VF (1) ― VF (2) ― VF (3) ― IR (1) ― IR (2) Total capacitance Reverse recovery time Characteristic Forward voltage Reverse current Test Condition Min Typ. Max IF = 1mA ― 0.60 ― IF = 10mA ― 0.72 ― IF = 100mA ― 0.90 1.20 VR = 30V ― ― 0.1 ― VR = 80V ― ― 0.5 CT ― VR = 0, f = 1MHz ― 0.9 ― pF trr ― IF = 10mA (fig.1) ― 1.6 ― ns 1 Unit V μA 2007-11-01 HN1D02FE Pin Assignment (Top View) 6 5 Q4 Q1 Unit 1 1 4 Marking Unit 2 Q3 A3 Q2 2 3 Fig. 1 Reverse Recovery Time (trr) Test Circuit 2 2007-11-01 HN1D02FE 3 2007-11-01 HN1D02FE RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 4 2007-11-01