Surface Mount Bandpass Filter 50Ω BPF-C495+ 470 to 520 MHz The Big Deal • High rejection (70 dB typical) • Linear phase (± 9deg typical over Fc ± 30 MHz) • Miniature shielded case CASE STYLE: HU1186 Product Overview The BPF-C495+ is a narrow band pass filter in a metal shielded package (size of 0.87" x 0.80" x .25") fabricated using SMT technology. The BPF-C495+ offers a typical pass band insertion loss of 1.7 dB with sharp roll-off and stopband rejection down to 90 dB typ. In addition, it has repeatable performance across production lots and consistent performance across temperature. Key Features Feature Advantages Minimal Phase deviation over attenuation range: ± 9 deg typical over Fc ±30MHz. Can provide low signal distortion for high data rate communication systems. High rejection, 70dB typical Achieving 90dB rejection at 1200MHz; the BPF-C495+ provides a versatile anti aliasing solution for high data rate receivers. Good VSWR, 1.3:1 typical over passband The BPF-C495+ has very good return loss over the operating bandwidth which enables low ripple interface when cascaded with other devices. Sharp roll off Provides good rejection of signals close to the passband, for improved system performance. Metal SMT shielded case Reduced interference to, and from surrounding components. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 3 Surface Mount Surface Mount Bandpass Filter 50Ω BPF-C495+ 470 to 520 MHz CASE STYLE: HU1186 Features High rejection, 70 dB typical Linear phase, up to ±9 deg typical over Fc ±30MHz Good VSWR, 1.3:1 typical in passband Sharp insertion loss roll off Shielded case Pass Band Aqueous washable Electrical Specifications at 25°C Parameter • Harmonic rejection • Transmitters / receivers • TV broadcasting F# Center Frequency Insertion Loss VSWR Insertion Loss VSWR Insertion Loss VSWR Stop Band, Lower Applications Stop Band, Upper Maximum Deviation from Linear Phase Frequency (MHz) Min. Typ. Max. Unit 495 2.0 1.3 3.0 1.8 MHz dB :1 Fc F1-F2 F1-F2 470-520 470-520 DC-F3 DC-F3 DC-410 DC-410 20 27 29 dB :1 F4-F5 F4-F5 625-2600 625-2600 20 30 27 dB :1 Fc ±30MHz 465-525 ±9 ±18 deg Maximum Ratings Functional Schematic Operating Temperature Storage Temperature RF Power Input -40°C to 85°C -55°C to 100°C 1W max. Permanent damage may occur if any of these limits are exceeded. RF IN RF OUT Typical Performance Data at 25°C Frequency (MHz) F1 F2 F4 F5 INSERTION LOSS (dB) F3 BPF-C495+ INSERTION LOSS (Full band) 0 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Frequency (MHz) Group Delay (nsec) 465.0 466.0 470.0 472.0 474.0 476.0 478.0 480.0 484.0 490.0 495.0 500.0 503.0 504.0 506.0 510.0 515.0 518.0 520.0 525.0 8.60 7.39 3.46 1.95 0.70 -0.34 -1.18 -1.85 -2.75 -3.21 -2.93 -2.22 -1.63 -1.41 -0.94 0.10 1.47 2.28 2.81 3.99 BPF-C495+ INSERTION LOSS (Passband) 0 1.4 20 1.6 1.8 40 2.0 470 480 490 500 510 520 60 80 100 0 300 600 900 1200 1500 1800 2100 2400 2700 FREQUENCY (MHz) 20 40 60 80 100 300 INSERTION PHASE (deg.) BPF-C495+ VSWR 1000 VSWR 100 1.4 1.3 10 1.2 1.1 470 480 490 500 510 520 300 600 500 600 700 800 FREQUENCY (MHz) 900 BPF-C495+ INSERTION PHASE & DEVIATION FROM LINEAR PHASE 1000 15 100 10 50 5 0 0 -5 -50 -100 INSERTION PHASE PHASE DEVIATION -10 -150 -15 470 475 480 485 490 495 500 505 510 515 520 1 0 150 400 PHASE DEVIATION (deg.) FREQUENCY (MHz) DC VSWR (:1) INSERTION LOSS (dB) Typical Frequency Response Insertion Loss (dB) 0.5 87.14 211.87 370.0 48.91 74.88 410.0 28.18 28.64 430.0 14.83 11.27 440.0 8.14 4.95 450.0 3.85 2.08 460.0 2.45 1.34 470.0 2.06 1.25 480.0 1.90 1.30 495.0 1.79 1.26 510.0 1.76 1.15 520.0 1.78 1.13 550.0 3.17 1.90 560.0 6.57 2.63 575.0 11.67 8.09 600.0 21.88 17.81 625.0 29.80 27.07 700.0 46.47 57.93 1200.0 90.71 145.46 2600.0 52.36 51.57 INSERTION LOSS (dB) • • • • • • 900 1200 1500 1800 2100 2400 2700 FREQUENCY (MHz) FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. A M160513 BPF-C495+ EDR-9350AUF1 RAV/URJ/NY 161230 Page 2 of 3 BPF-C495+ Bandpass Filter Pad Connections Outline Drawing INPUT 2 OUTPUT 9 NOT CONNECTED GROUND PCB Land Pattern 6,13 1,3,4,5,7,8,10,11,12,14 Demo Board MCL P/N: TB-500+ Suggested PCB Layout (PL-294) Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .870 22.10 B .800 20.32 C .25 6.35 D .100 2.54 E .097 2.46 F --- J .105 2.67 K .910 23.11 L --- M .060 1.52 N .060 1.52 P --- G .060 1.52 H .040 1.02 wt grams 2.85 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 3