Engineering Bulletin HXA ● ● ● ● Introductory No.830I/May.2014 Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Series High reliability and high voltage are realized by hybrid electrolyte Endurance with ripple current : 4,000 hours at 125℃ Rated voltage range : 16 to 80Vdc, Capacitance range : 10 to 470μF For high temperature and high reliability applications. (Automotive equipment, Base station equipment, etc.) ◆ SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance -55 to +125℃ 16 to 80Vdc ±20%（M） I=0.01CV Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) 16V 25V 35V 50V 63V 80V Rated voltage (Vdc) tanδ(Max.) 0.16 0.14 0.12 0.10 0.08 0.08 Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 100kHz) ◆ MARKING ●Terminal Code : A EX) 35V47μF ⊕ W 26A Size Code F61 F80 HA0 JA0 C±0.2 B±0.2 φD±0.5 P Vent for JA0 0.3max. A±0.2 L±0.3(Note) ⊖ L A φD 6.3 5.8 6.6 6.3 7.7 6.6 8 10.0 8.3 10 10.0 10.3 B 6.6 6.6 8.3 10.3 C 7.2 7.2 9.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 ◆ PART NUMBERING SYSTEM 3 4 5 6 7 8 9 10 A RA 11 12 13 14 15 16 17 M P 1.9 1.9 3.1 4.5 ⊖ 47 V HA ⊕ ●Rated voltage symbol Rated voltage (Vdc) 16 25 35 50 63 80 Note : L±0.5 for HA0 and JA0 2 (at 20℃ , 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125℃ . Capacitance change ≦ ±30％ of the initial value D.F. (tanδ) ≦ 200％ of the initial specified value ESR ≦ 200％ of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦ ±30％ of the initial value D.F. (tanδ) ≦ 200％ of the initial specified value ESR ≦ 200％ of the initial specified value Leakage current ≦ The initial specified value ◆ DIMENSIONS ［mm］ 1 (at 20℃ after 2 minutes) Z(-25℃ ) / Z(+20℃ ) ≦ 1.5 Z(-55℃ ) / Z(+20℃ ) ≦ 2.0 Shelf Life H HXA (at 20℃ , 120Hz) 18 G Symbol C E V H J K Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47μF:470, 100μF:101) Taping code Terminal code Voltage code (ex. 35V:350) Series code Category Please contact us for mass production schedule. Specifications in this bulletin are subject to change without notice. NIPPON CHEMI-CON CORPORATION 1698 1 Engineering Bulletin Introductory No.830I/May.2014 Conductive Polymer Hybrid Aluminum Electrolytic Capacitors HXASeries ◆ STANDARD RATINGS WV (Vdc) Cap (μF) ESR (mΩmax/20℃ , 100kHz) Size code Rated ripple current (mArms/125℃ , 100kHz) Part No. 82 F61 45 950 HHXA160ARA820MF61G 150 F80 27 1,300 HHXA160ARA151MF80G 270 HA0 22 1,700 HHXA160ARA271MHA0G 470 JA0 18 2,100 HHXA160ARA471MJA0G 56 F61 50 900 HHXA250ARA560MF61G Conductive Polymer Tentative 100 F80 30 1,400 HHXA250ARA101MF80G 25 Aluminum Solid Capacitors No.824C / Oct.2012 220 HA0 27 1,600 HHXA250ARA221MHA0G 330 JA0 20 2,000 HHXA250ARA331MJA0G 47 F61 60 900 HHXA350ARA470MF61G TM NPCAP Series F80 68 35 1,400 HHXA350ARA680MF80G 35 150 HA0 27 1,600 HHXA350ARA151MHA0G 270 JA0 20 2,000 HHXA350ARA271MJA0G 22 F61 80 750 HHXA500ARA220MF61G ◆STANDARD RATINGS 33 F80 40 1,100 HHXA500ARA330MF80G 50 Rated ripple current 1,250 68 HA0 30 HHXA500ARA680MHA0G ESR Leakage current Cap Size WV (mArms/100kHz) (mΩmax/20℃,28 PartHHXA500ARA101MJA0G No. JA0 1,600 (µAmax/after 2min.) (μF) 100 code (Vdc) 1 100k to 300kHz) -55℃≦Tx≦+85℃*1 +85℃<Tx≦+105℃* 10 F61 120 700 HHXA630ARA100MF61G 39 40 2,700 2,200900 APMA160ARA390MF40S 22 F40 F80 312 80 HHXA630ARA220MF80G 63 68 40 2,700 2,200 APMA160ARA680MF40S 33 F40 HA0 544 40 1,100 HHXA630ARA330MHA0G 16 150 F60 1,200 18 4,100 3,300 APMA160ARA151MF60S 56 JA0 30 1,400 HHXA630ARA560MJA0G 220 F60 1,760 18 4,100 3,300 APMA160ARA221MF60S 22 F40 HA0 470 45 1,100 HHXA800ARA220MHA0G 47 45 2,600 2,100 APMA200ARA470MF40S 2080 39 F60 JA01,500 35 1,200 HHXA800ARA390MJA0G 150 20 3,700 3,200 APMA200ARA151MF60S 15 F40 187 50 2,400 2,000 APMA250ARA150MF40S 22 275 F40 50 2,400 2,000 APMA250ARA220MF40S 25 56 700 F60 26 3,400 2,800 APMA250ARA560MF60S 16 Engineering Bulletin PMA ◆ RECOMMENDED REFLOW SOLDERING CONDITIONS *1 Tx: Ambient temperature The following conditions are recommended for air convection and infrared reflow soldering on the SMD products on to a glass epoxy circuit boards by cream solder. The dimensions of the glass epoxy boards with resist are 90×50×0.8mm. The temperatures shown are the surface temperature values on the top of the can and on the capacitor terminals. ◆RECOMMENDED REFLOW SOLDERING CONDITIONS Reflow should be performed twice or less. ●Reflow Profilethat the capacitor became cold enough to the room temperature (5 to 35℃ ) before the second reflow. Please ensure ● Reflow Profile Temperature on the top of capacitor and Temperature of capacitor terminal (℃) Peak temperature Peak 230 Max. period of time over 230℃ 217 Max. period of time over 217℃ Preheat Time (sec.) Size Code Voltage range(Vdc) F61, F80 Preheat Preheat 150℃ 150 to 180℃ to 180℃ 16 to 25V 120 120 sec.max. sec. max. HA0, JA0 Time maintained Time maintained Peak temp. Reflow number Time maintained above 217℃ Time maintained above 230℃ Peak temp. Reflow number above 217℃ above 230℃ 50 sec. max. 40 sec. max. 260℃ max. 2-cycle allowed 40 sec.max. 50 sec.max. 1-cycle only 250℃ max. 260℃ max. 1-cycle only 40 sec.max. 30 sec.max. 2-cycle allowed 50 sec. max. 40 sec. max. 245℃ max. 2-cycle allowed ●Recommended Solder Land(Based on the PX series) [mm] Solder land on PC board c b a Please contact us for mass production schedule. Size code a b c Specifications in this bulletin are subject to change without notice. F40,F60 b Location of capacitor 1.9 NIPPON CHEMI-CON CORPORATION 3.5 1.6 1698 2