DTA113Z series Datasheet PNP -100mA -50V Digital Transistors (Bias Resistor Built-in Transistors) l Outline Parameter VCC Value IC(MAX.) -100mA R1 R2 1kΩ 10kΩ EMT3 UMT3 -50V DTA113ZE DTA113ZUA SOT-416(SC-75A) SOT-323(SC-70) SMT3 l Features 1) Built-In Biasing Resistors 2) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see inner circuit) . 3) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of completely eliminating parasitic effects. 4) Only the on/off conditions need to be set for operation, making the circuit design easy. 5) Complementary NPN Types: DTC113ZUA/ DTC113ZKA 6) Lead Free/RoHS Compliant. DTA113ZKA SOT-346(SC-59) l Inner circuit l Application Switching circuit, Inverter circuit, Interface circuit, Driver circuit l Packaging specifications Part No. Package Package size Taping code Reel size Tape width (mm) (mm) Basic ordering unit.(pcs) Marking DTA113ZE EMT3 1616 TL 180 8 3000 E11 DTA113ZUA DTA113ZKA UMT3 SMT3 2021 2928 T106 T146 180 180 8 8 3000 3000 111 E11 www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 1/7 20121023 - Rev.001 DTA113Z series Datasheet l Absolute maximum ratings (Ta = 25°C) Parameter Symbol Values Unit Supply voltage VCC -50 V Input voltage VIN -10 to 5 V Output current IO -100 mA IC(MAX)*1 -100 mA Collector current DTA113ZE Power dissipation 150 PD*2 DTA113ZUA 200 DTA113ZKA mW 200 Junction temperature Range of storage temperature Tj 150 ℃ Tstg -55 to +150 ℃ l Electrical characteristics (Ta = 25°C) Values Parameter Symbol Input current Unit Min. Typ. Max. VI(off) VCC = -5V, IO = -100μA - - -0.3 VI(on) VO = -0.3V, IO = -20mA -3 - - VO(on) IO / I I = -10mA / -0.5mA - -0.1 -0.3 V VI = -5V - - -7.2 mA Input voltage Output voltage Conditions II V Output current IO(off) VCC = -50V, VI = 0V - - -0.5 μA DC current gain GI VO = -5V, IO = -5mA 33 - - - Input resistance R1 - 0.7 1 1.3 kΩ Resistance ratio R2/R1 - 8 10 12 - - 250 - MHz Transition frequency f T*1 VCE = -10V, IE = 5mA, f = 100MHz *1 Characteristics of built-in transistor *2 Each terminal mounted on a reference footprint www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 2/7 20121023 - Rev.001 DTA113Z series Datasheet l Electrical characteristic curves (Ta =25°C) Fig.1 Input voltage vs. output current (ON characteristics) Fig.2 Output current vs. input voltage (OFF characteristics) Fig.3 Output current vs. output voltage www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. Fig.4 DC current gain vs. output current 3/7 20121023 - Rev.001 DTA113Z series Datasheet l Electrical characteristic curves (Ta =25°C) Fig.5 Output voltage vs. output current www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 4/7 20121023 - Rev.001