Aluminum Electrolytic Capacitors/NHG Radial Lead Type Series: NHG n Features Type : Country of Origin A Japan Malaysia China Taiwan Endurance: +105°C 1000 to 2000 h Smaller than Series NHE n Specifications -55 to +105°C 6.3 to 100 V.DC 0.1 to 22000 µF Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance -25 to +105°C 160 to 450 V .DC 1.0 to 330 µ F ± 20 % (120Hz/+20°C) I< = 0.06 CV + 10(µ A) after 2 minutes application of rated working voltage at +20°C DC Leakage Current I< = 0.01 CV or 3(µ A) after 2 minutes application of rated working voltage at +20°C tan δ Please see the attached standard products list After following life test with DC voltage and +105±2°C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall meet the limits specified below. Duration : 6.3 to 100V.W. ; (φ5 to 8) =1000 hours , (φ10 to 18)= 2000 hours 160 to 450V.W. ; 2000 hours Post test requirements at +20 °C Endurance Capacitance change tan δ DC leakage current ±20% of initial measured value < = 200 % of initial specified value < = initial specified value After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life n Frequency correction factor for ripple current W.V. (V.DC) 6.3 to 100 160 to 450 Cap. (µF) 0.1 47 1000 1 to 33 to 470 to 22000 to 330 Frequency(Hz) 60 0.75 0.80 0.85 0.80 120 1 1 1 1 1k 1.55 1.35 1.10 1.35 10k 1.80 1.50 1.15 1.50 100k 2.00 1.50 1.15 1.50 n Dimensions in mm (not to scale) φ10 < = φd±0.05 φ8 > = P± 0.5 (> = 6.3mm dia) P± 0.5 Sleeve Vent L L< = 16:L+1.0 max L< = 20:L+2.0 max 14 min 3 min φD+0.5 max φD+0.5 max Body Dia. φD 5 6.3 8 10 12.5 16 18 Lead Dia. φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Lead space P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE90 Aluminum Electrolytic Capacitors/NHG n Standard Products W.V. (V) 6.3 10 16 Cap. 220 5 11 140 0.28 1000 Lead Length 470 0.5 2.0 5.0 2.5 2.5 Part No. Min. Packaging Q'ty Straight Taping Leads (pcs) (pcs) ECA0JHG221( ) 200 2000 6.3 11.2 230 0.28 1000 0.5 2.5 5.0 ECA0JHG471( ) 200 2000 1000 8 11.5 380 0.28 1000 0.6 3.5 5.0 ECA0JHG102( ) 200 1000 2200 10 16 710 0.30 2000 0.6 5.0 5.0 ECA0JHG222( ) 200 500 3300 10 20 840 0.32 2000 0.6 5.0 5.0 ECA0JHG332( ) 200 500 4700 12.5 20 1090 0.34 2000 0.6 5.0 5.0 ECA0JHG472( ) 200 500 6800 12.5 25 1350 0.38 2000 0.6 5.0 5.0 ECA0JHG682( ) 200 500 10000 16 25 1650 0.46 2000 0.8 7.5 7.5 ECA0JHG103( ) 100 250 15000 16 31.5 2010 0.56 2000 0.8 7.5 ECA0JHG153 100 22000 18 35.5 2350 0.70 2000 0.8 7.5 ECA0JHG223 50 330 6.3 11.2 200 0.24 1000 0.5 2.5 5.0 ECA1AHG331( ) 200 2000 470 8 11.5 250 0.24 1000 0.6 3.5 5.0 ECA1AHG471( ) 200 1000 2.5 1000 10 12.5 460 0.24 2000 0.6 5.0 5.0 ECA1AHG102( ) 200 500 2200 10 20 760 0.26 2000 0.6 5.0 5.0 ECA1AHG222( ) 200 500 3300 12.5 20 1000 0.28 2000 0.6 5.0 5.0 ECA1AHG332( ) 200 500 4700 12.5 25 1260 0.30 2000 0.6 5.0 5.0 ECA1AHG472( ) 200 500 7.5 ECA1AHG682( ) 100 250 ECA1AHG103 100 6800 16 25 1570 0.34 2000 0.8 7.5 10000 16 31.5 1890 0.42 2000 0.8 7.5 15000 18 35.5 2180 0.52 2000 0.8 7.5 100 5 11 0.20 1000 0.5 2.0 5.0 2.5 ECA1CHG101( ) 200 2000 220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 ECA1CHG221( ) 200 2000 330 8 11.5 260 0.20 1000 0.6 3.5 5.0 ECA1CHG331( ) 200 1000 110 ECA1AHG153 50 470 8 11.5 310 0.20 1000 0.6 3.5 5.0 ECA1CHG471( ) 200 1000 1000 10 16 560 0.20 2000 0.6 5.0 5.0 ECA1CHG102( ) 200 500 2200 12.5 20 920 0.22 2000 0.6 5.0 5.0 ECA1CHG222( ) 200 500 3300 12.5 25 1170 0.24 2000 0.6 5.0 5.0 ECA1CHG332( ) 200 500 4700 16 25 1480 0.26 2000 0.8 7.5 7.5 ECA1CHG472( ) 100 250 6800 16 31.5 1780 0.30 2000 0.8 7.5 ECA1CHG682 100 10000 18 35.5 2060 0.38 2000 0.8 7.5 ECA1CHG103 50 91 0.16 1000 0.5 2.0 5.0 2.5 ECA1EHG470( ) 200 2000 130 0.16 1000 0.5 2.5 5.0 2.5 ECA1EHG101( ) 200 2000 47 35 Specification Lead Space Dia. Length Ripple tan δ Endu- Lead current (±20%) (120Hz) Dia. rance (120Hz) Straight Taping Taping (+105°C) (+20°C) ∗B ∗i (µF) ( m m ) ( m m ) (m A ) (hours) ( m m ) ( m m ) (mm) ( m m ) 100 25 Case size 5 11 6.3 11.2 220 8 11.5 230 0.16 1000 0.6 3.5 5.0 ECA1EHG221( ) 200 1000 330 8 11.5 310 0.16 1000 0.6 3.5 5.0 ECA1EHG331( ) 200 1000 470 10 12.5 380 0.16 2000 0.6 5.0 5.0 ECA1EHG471( ) 200 500 1000 10 20 680 0.16 2000 0.6 5.0 5.0 ECA1EHG102( ) 200 500 2200 12.5 25 1090 0.18 2000 0.6 5.0 5.0 ECA1EHG222( ) 200 500 3300 16 25 1400 0.20 2000 0.8 7.5 7.5 ECA1EHG332( ) 100 250 4700 16 31.5 1750 0.22 2000 0.8 7.5 ECA1EHG472 100 6800 18 35.5 2040 0.26 2000 0.8 7.5 47 5 11 0.14 1000 0.5 2.0 90 ECA1EHG682 50 5.0 2.5 ECA1VHG470( ) 200 2000 2.5 ECA1VHG101( ) 200 2000 ECA1VHG221( ) 200 1000 100 6.3 11.2 150 0.14 1000 0.5 2.5 5.0 220 8 11.5 270 0.14 1000 0.6 3.5 5.0 When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm. i=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE91 Aluminum Electrolytic Capacitors/NHG n Standard Products W.V. (V) 35 100 Part No. Min. Packaging Q'ty Straight Taping Leads (pcs) (pcs) 330 10 12.5 350 0.14 2000 0.6 5.0 5.0 ECA1VHG331( ) 200 500 470 10 16 460 0.14 2000 0.6 5.0 5.0 ECA1VHG471( ) 200 500 12.5 20 810 0.14 2000 0.6 5.0 5.0 ECA1VHG102( ) 200 500 7.5 ECA1VHG222( ) 100 250 ECA1VHG332 100 1000 2200 16 25 1260 0.16 2000 0.8 7.5 3300 16 31.5 1610 0.18 2000 0.8 7.5 4700 18 35.5 1910 0.20 2000 0.8 7.5 11 0.12 1000 0.5 2.0 5 1.1 ECA1VHG472 5.0 2.5 ECA1HHG0R1( ) 50 200 2000 0.22 5 11 2.3 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR22( ) 200 2000 0.33 5 11 3.5 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR33( ) 200 2000 0.47 5 11 5 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR47( ) 200 2000 1 5 11 10 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG010( ) 200 2000 2.2 5 11 18 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG2R2( ) 200 2000 3.3 5 11 22 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG3R3( ) 200 2000 4.7 5 11 26 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG4R7( ) 200 2000 10 5 11 39 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG100( ) 200 2000 22 5 11 65 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG220( ) 200 2000 33 5 11 90 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG330( ) 200 2000 47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5 ECA1HHG470( ) 200 2000 100 8 11.5 180 0.12 1000 0.6 3.5 5.0 ECA1HHG101( ) 200 1000 220 10 12.5 300 0.12 2000 0.6 5.0 5.0 ECA1HHG221( ) 200 500 330 10 16 410 0.12 2000 0.6 5.0 5.0 ECA1HHG331( ) 200 500 470 10 20 530 0.12 2000 0.6 5.0 5.0 ECA1HHG471( ) 200 500 5.0 ECA1HHG102( ) 200 500 ECA1HHG222 100 1000 12.5 25 950 0.12 2000 0.6 5.0 2200 16 31.5 1470 0.14 2000 0.8 7.5 3300 18 35.5 1770 0.16 2000 0.8 7.5 10 5 11 0.10 1000 0.5 2.0 22 5 11 33 6.3 11.2 47 63 Lead Length Lead Space Lead tan δ EnduLength Ripple Cap. current (120Hz) rance Dia. Straight Taping Taping (±20%) (120Hz) (+20°C) ∗B ∗i (+105°C) (µF) ( m m ) ( m m ) (m A ) ( m m ) ( m m ) (mm) ( m m ) (hours) 0.1 50 Specification Case size Dia. 6.3 46 ECA1HHG332 5.0 2.5 ECA1JHG100( ) 50 200 2000 71 0.10 1000 0.5 2.0 5.0 2.5 ECA1JHG220( ) 200 2000 100 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG330( ) 200 2000 2.5 11.2 120 0.10 1000 0.5 2.5 5.0 ECA1JHG470( ) 200 2000 100 10 12.5 215 0.10 2000 0.6 5.0 5.0 ECA1JHG101( ) 200 500 220 10 16 335 0.10 2000 0.6 5.0 5.0 ECA1JHG221( ) 200 500 330 10 20 510 0.10 2000 0.6 5.0 5.0 ECA1JHG331( ) 200 500 470 12.5 20 640 0.10 2000 0.6 5.0 5.0 ECA1JHG471( ) 200 500 7.5 ECA1JHG102( ) 100 250 1000 16 25 930 0.10 2000 0.8 7.5 2200 18 35.5 1610 0.12 2000 0.8 7.5 ECA1JHG222 50 0.47 5 11 9 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHGR47( ) 200 2000 1 5 11 14 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG010( ) 200 2000 2.2 5 11 21 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG2R2( ) 200 2000 3.3 5 11 31 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG3R3( ) 200 2000 4.7 5 11 38 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG4R7( ) 200 2000 10 6.3 11.2 54 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG100( ) 200 2000 22 6.3 11.2 93 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG220( ) 200 2000 When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm. i=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE92 Aluminum Electrolytic Capacitors/NHG n Standard Products W.V. (V) Cap. 0.08 1000 0.6 (pcs) 3.5 5.0 ECA2AHG330( ) 200 (pcs) 1000 10 12.5 165 0.08 2000 0.6 5.0 5.0 ECA2AHG470( ) 200 500 20 265 0.08 2000 0.6 5.0 5.0 ECA2AHG101( ) 200 500 220 12.5 25 440 0.08 2000 0.6 5.0 5.0 ECA2AHG221( ) 200 500 330 16 25 540 0.08 2000 0.8 7.5 7.5 ECA2AHG331( ) 100 250 470 16 25 715 0.08 2000 0.8 7.5 7.5 ECA2AHG471( ) 100 250 1000 18 35.5 985 0.08 2000 0.8 7.5 11.2 17 0.15 2000 0.5 2.5 6.3 ECA2AHG102 5.0 2.5 ECA2CHG010( ) 50 200 2000 2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG2R2( ) 200 2000 3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG3R3( ) 200 2000 6.3 2.5 11.2 43 0.15 2000 0.5 2.5 5.0 ECA2CHG4R7( ) 200 2000 10 10 12.5 70 0.15 2000 0.6 5.0 5.0 ECA2CHG100( ) 200 500 22 10 20 130 0.15 2000 0.6 5.0 5.0 ECA2CHG220( ) 200 500 33 10 20 180 0.15 2000 0.6 5.0 5.0 ECA2CHG330( ) 200 500 47 12.5 20 220 0.15 2000 0.6 5.0 5.0 ECA2CHG470( ) 200 500 16 25 335 0.15 2000 0.8 7.5 7.5 ECA2CHG101( ) 100 250 220 16 31.5 540 0.15 2000 0.8 7.5 ECA2CHG221 100 330 18 31.5 705 0.15 2000 0.8 7.5 ECA2CHG331 50 1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG010( ) 200 2000 2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG2R2( ) 200 2000 3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG3R3( ) 200 2000 4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 ECA2DHG4R7( ) 200 1000 16 80 0.15 2000 0.6 5.0 5.0 ECA2DHG100( ) 200 500 10 10 22 10 20 140 0.15 2000 0.6 5.0 5.0 ECA2DHG220( ) 200 500 33 12.5 20 190 0.15 2000 0.6 5.0 5.0 ECA2DHG330( ) 200 500 47 12.5 20 220 0.15 2000 0.6 5.0 5.0 ECA2DHG470( ) 200 500 100 16 25 335 0.15 2000 0.8 7.5 7.5 ECA2DHG101( ) 100 250 220 18 31.5 575 0.15 2000 0.8 7.5 1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 ECA2EHG010( ) 2.2 6.3 11.2 29 0.15 2000 0.5 2.5 5.0 2.5 3.3 8 11.5 42 0.15 2000 0.6 3.5 5.0 4.7 50 200 2000 ECA2EHG2R2( ) 200 2000 ECA2EHG3R3( ) 200 1000 11.5 50 0.15 2000 0.6 3.5 5.0 ECA2EHG4R7( ) 200 1000 10 16 88 0.15 2000 0.6 5.0 5.0 ECA2EHG100( ) 200 500 22 12.5 20 155 0.15 2000 0.6 5.0 5.0 ECA2EHG220( ) 200 500 33 12.5 20 190 0.15 2000 0.6 5.0 5.0 ECA2EHG330( ) 200 500 47 12.5 25 230 0.15 2000 0.6 5.0 5.0 ECA2EHG470( ) 200 500 16 31.5 365 0.15 2000 0.8 7.5 11.2 18 0.20 2000 0.5 2.5 5.0 1 8 ECA2DHG221 10 100 350 130 Straight Taping Leads 10 100 250 11.5 Min. Packaging Q'ty 47 4.7 200 8 Part No. 100 1 160 Lead Length Lead Space Dia. Length Ripple tan δ Endu- Lead current (±20%) Dia. (120Hz) (120Hz) rance Straight Taping Taping (+105°C) (+20°C) ∗B ∗i (µF) ( m m ) ( m m ) (m A ) (hours) ( m m ) ( m m ) (mm) ( m m ) 33 100 Specification Case size 6.3 2.5 ECA2EHG101 100 ECA2VHG010( ) 200 2000 2.2 8 11.5 31 0.20 2000 0.6 3.5 5.0 ECA2VHG2R2( ) 200 1000 3.3 10 12.5 38 0.20 2000 0.6 5.0 5.0 ECA2VHG3R3( ) 200 500 4.7 10 16 50 0.20 2000 0.6 5.0 5.0 ECA2VHG4R7( ) 200 500 10 20 82 0.20 2000 0.6 5.0 5.0 ECA2VHG100( ) 200 500 10 When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm. i=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE93 Aluminum Electrolytic Capacitors/NHG n Standard Products W.V. (V) 350 Part No. Min. Packaging Q'ty Straight Taping Leads (pcs) (pcs) 22 12.5 20 130 0.20 2000 0.6 5.0 5.0 ECA2VHG220( ) 200 500 33 16 25 195 0.20 2000 0.8 7.5 7.5 ECA2VHG330( ) 100 250 47 16 25 230 0.20 2000 0.8 7.5 7.5 ECA2VHG470( ) 100 250 100 18 31.5 375 0.20 2000 0.8 7.5 6.3 11.2 18 0.24 2000 0.5 2.5 5.0 ECA2VHG101 2.5 ECA2GHG010( ) 50 200 2000 2.2 8 11.5 30 0.24 2000 0.6 3.5 5.0 ECA2GHG2R2( ) 200 1000 3.3 10 12.5 40 0.24 2000 0.6 5.0 5.0 ECA2GHG3R3( ) 200 500 4.7 10 16 50 0.24 2000 0.6 5.0 5.0 ECA2GHG4R7( ) 200 500 10 10 20 80 0.24 2000 0.6 5.0 5.0 ECA2GHG100( ) 200 500 22 12.5 25 145 0.24 2000 0.6 5.0 5.0 ECA2GHG220( ) 200 500 33 16 25 195 0.24 2000 0.8 7.5 7.5 ECA2GHG330( ) 100 250 47 16 31.5 250 0.24 2000 0.8 7.5 ECA2GHG470 100 1 450 Lead Length Lead Space Ripple Cap. tan δ Endu- Lead current Dia. (120Hz) rance (±20%) (120Hz) Straight Taping Taping (+105°C) (+20°C) ∗B ∗i (µF) ( m m ) ( m m ) (m A ) (hours) ( m m ) ( m m ) (mm) ( m m ) Dia. Length 1 400 Specification Case size 8 11.5 18 0.24 2000 0.6 3.5 5.0 ECA2WHG010( ) 200 1000 2.2 10 12.5 29 0.24 2000 0.6 5.0 5.0 ECA2WHG2R2( ) 200 500 3.3 10 16 41 0.24 2000 0.6 5.0 5.0 ECA2WHG3R3( ) 200 500 4.7 10 20 49 0.24 2000 0.6 5.0 5.0 ECA2WHG4R7( ) 200 500 10 12.5 20 75 0.24 2000 0.6 5.0 5.0 ECA2WHG100( ) 200 500 22 16 25 115 0.24 2000 0.8 7.5 7.5 ECA2WHG220( ) 100 250 33 16 31.5 155 0.24 2000 0.8 7.5 ECA2WHG330 100 When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm. i=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE94