ISL95833 Print Page Dual 2+1 PWM Controller for IMVP-7/VR12 CPUs Features Description Technical Documentation Pricing / Samples iSim Design Simulation Tools And Support Related Devices Datasheet ISL95833 Dual 2+1 PWM Controller for IMVP-7/VR12 CPUs VIN (min) (V) 4.75 VIN (max) (V) 5.25 VOUT (min) (V) .25 VOUT (max) (V) 1.52 IOUT (max) (A) 60 VBIAS (V) 5 Applications VR12/IMVP7 Max # of outputs 2 Max # of phases 2 Droop Y Integrated MOSFET Driver Y Product Information Key Features Serial Data Bus Dual Outputs: Configurable 2- or 1-phase for the 1st Output using one Integrated Gate Driver 1-phase for the 2nd Output using an Integrated Gate Driver R3 Modulator Excellent Transient Response High Light Load Efficiency 0.5% System Accuracy Over-Temperature Supports Multiple Current Sensing Methods Lossless Inductor DCR Current Sensing Precision Resistor Current Sensing Differential Remote Voltage Sensing Programmable VBOOT Voltage at Start-up Resistor Programmable IMAX, Switching Frequency for Both Outputs Adaptive Body Diode Conduction Time Reduction Description The ISL95833 Pulse Width Modulation (PWM) controller IC provides a complete solution for IMVP-7/VR12™ compliant microprocessor and graphic processor core power supplies. It provides the control and protection for two Voltage Regulators (VRs). The first VR, typically for VCORE, incorporates 1 integrated driver and can operate in 2- or 1-phase configurations. The second VR, typically for Graphics, is a single phase regulator incorporating an integrated driver. The two VRs share a serial control bus to communicate with the CPU and achieve lower cost and smaller board area compared with the two-chip approach. Both VRs utilize Intersil's Robust Ripple Regulator R3 Technology™. The R3 modulator has numerous advantages compared to traditional modulators, including faster transient response, variable switching frequency during load transients, and improved light load efficiency due to its ability to automatically change switching frequency. The ISL95833 has several other key features. Both outputs support either DCR current sensing with a single NTC thermistor for DCR temperature compensation, or more precise resistor current sensing if desired. Both outputs come with remote voltage sense, programmable VBOOT voltage, IMAX, and switching frequency, adjustable overcurrent protection and separate Power-Good signals. Pricing / Packaging / Samples / Ordering iBuy direct from Intersil Check distributor inventory iBuy direct - out of stock Request samples Available in RoHS/Pb-Free Design-In Status Temp. Package MSL ISL95833HRTZ Active Hi-Temp Comm 32 Ld TQFN 3 ISL95833HRTZ-T Active Hi-Temp Comm 32 Ld TQFN T+R 3 ISL95833IRTZ Active Ind 32 Ld TQFN 3 ISL95833IRTZ-T Active Ind 32 Ld TQFN T+R 3 Part No. Price US $ The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 SMD = Standard Microcircuit Drawing Technical Documentation Datasheet(s): Dual 2+1 PWM Controller for IMVP-7/VR12 CPUs Tools And Support iSim Design Simulation No Models Available Applications IMVP-7/VR12 Compliant Computers Related Devices ISL6353 Multiphase PWM Regulator for VR12 DDR Memory Systems ISL6363 Multiphase PWM Regulator for VR12™ Desktop CPUs ISL6364 Dual 4-Phase + 1-Phase PWM Controller for VR12/IMVP7 Applications ISL6364C Dual 4-Phase + 1-Phase PWM Controller for VR12 Desktop Applications ISL6366 Dual 6-Phase + 1-Phase PWM Controller for VR12/IMVP7 Applications ISL95831 3+1 Voltage Regulator for IMVP-7/VR12™ CPUs ISL95835 3+1 and 1+1 Voltage Regulator for IMVP-7/VR12™ CPUs ISL95836 Dual 3+2 PWM Controller for IMVP-7/VR12™ CPUs ISL95837 3+1 and 1+1 Voltage Regulator for IMVP-7/VR12™ CPUs About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet ©2003-2011. Intersil Americas Inc. All rights reserved. http://www.intersil.com/products/print.asp?id=ISL95833[3/9/2012 9:51:08 AM] Parametric Table