11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier CMM1118-QT March 2010 - Rev 13-Mar-10 Features 20 dB Gain 14 dBm P1dB 3x3 QFN Package Single Power Supply 5-7 V, 110 mA Self Bias On-Chip ESD Protection Circuit Description Mimix Broadband’s 3 stage 11.0 to 20.0 GHz driver amplifier is packaged in surface mount 3x3 QFN package. The device is a self-biased, single supply design with 20 dB gain and 14 dBm P1dB. This MMIC uses Mimix Broadband’s optical pHEMT process. Absolute Maximum Ratings Supply Voltage RF Input Power Storage Temperature (Tstg) Junction Temperature Operating Temperature +8 V +10 dBm -55 ºC to +125 ºC 175 ºC -40 ºC to +85ºC Electrical Characteristics (T=25ºC) Parameter Frequency Range Gain Gain Delta Output P1dB Output IP3 Input Return Loss Current Supply Voltage Units GHz dB dB dBm dBm dB mA V Min. 11 17 11 21 -20 -11 11 22 14 20 -12 -15 12 22 10 Typ. Max. 20 20 3 14 22 -8 5 130 7 Typical Parameters (5V) Parameter Frequency Gain IP Return Loss Op Return Loss P1dB OIP3 Units GHz dB dB dB dBm dBm Typical 17 18 -8 -6 14 22 20 20 -5 -12 16 20 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 1 of 6 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier CMM1118-QT March 2010 - Rev 13-Mar-10 Driver Amplifier Measurements CMM1118-QT: Gain Vs Voltage 30 CMM1118-QT: OIP3 Vs Voltage 30 28 25 26 20 OIP3 (dBm) Gain (dB) 24 22 20 18 15 5V 6V 10 16 7V 5V 14 6V 12 7V 5 0 10 10 11 12 13 14 15 16 17 18 19 10 20 11 12 13 CMM1118-QT: Psat Vs Voltage 18 18 16 16 14 14 12 12 10 5V 8 6V 6 16 17 18 19 20 10 5V 8 6V 6 7V 4 4 2 2 7V 0 0 10 11 12 13 14 15 16 17 18 19 10 20 11 12 13 CMM1118-QT: Psat Vs Temp, Vdd = 5V 20 14 15 16 17 18 19 20 Frequency (GHz) Frequency (GHz) 18 18 16 16 14 14 12 12 10 25C 8 -40C 6 CMM1118-QT: P1dB Vs Temp, Vdd = 5V 20 Pout (dBm) Pout (dBm) 15 CMM1118-QT: P1dB Vs Voltage 20 Pout (dBm) Pout (dBm) 20 14 Frequency (GHz) Frequency (GHz) 10 25C 8 -40C 6 80 4 4 2 2 80 0 0 10 11 12 13 14 15 16 Frequency (GHz) 17 18 19 20 10 11 12 13 14 15 16 17 18 19 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 6 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 20 11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier CMM1118-QT March 2010 - Rev 13-Mar-10 Driver Amplifier Measurements CMM1118-QT: Gain Vs Temp 40 CMM118-QT: Input Return Loss Vs Temp 0 30 -5 20 -10 dB dB 10 -15 0 -20 80C -10 80C 25C 25C -40C -20 -25 -40C -30 -30 10 11 12 13 14 15 16 17 18 19 10 20 11 12 13 CMM1118-QT: Output Return Loss Vs Temp 0 14 15 16 17 18 19 20 18 19 20 Frequency (GHz) Frequency (GHz) CMM1118-QT: Isolation Vs Temp 0 -10 -5 -20 -30 dB dB -10 -15 -20 -50 80C 80C -60 25C -40C -25 -40 25C -40C -70 -30 -80 10 11 12 13 14 15 16 Frequency (GHz) 17 18 19 20 10 11 12 13 14 15 16 17 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 6 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier CMM1118-QT March 2010 - Rev 13-Mar-10 Evaluation Board Layout Vdd RF IN RF OUT Pin Assignment and Description Pin # Function Description Pin 1 NC No connection pin. It is recommended to RF ground this pin Pin 2 RF INPUT DC coupled. If voltage is present at the input line then a DC blocking capacitor is required Pin 3 NC No connection pin. It is recommended to RF ground this pin Pin 4 NC No connection pin. It is recommended to RF ground this pin Pin 5 NC No connection pin. It is recommended to RF ground this pin Pin 6 NC No connection pin. It is recommended to RF ground this pin Pin 7 NC No connection pin. It is recommended to RF ground this pin Pin 8 NC No connection pin. It is recommended to RF ground this pin Pin 9 NC No connection pin. It is recommended to RF ground this pin Pin 10 NC No connection pin. It is recommended to RF ground this pin Pin 11 RF OUTPUT DC coupled. If voltage is present at the input line then a DC blocking capacitor is required Pin 12 NC No connection pin. It is recommended to RF ground this pin Pin 13 Vdd Positive voltage supply. External bypass capacitors are required Pin 14 NC No connection pin. It is recommended to RF ground this pin Pin 15 NC No connection pin. It is recommended to RF ground this pin Pin 16 NC No connection pin. It is recommended to RF ground this pin Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 6 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier CMM1118-QT March 2010 - Rev 13-Mar-10 Package Outline and Assembly Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 6 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier CMM1118-QT March 2010 - Rev 13-Mar-10 Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: • Do not ingest. • Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these byproducts are dangerous to the human body if inhaled, ingested, or swallowed. • Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Typical Reflow Profiles Reflow Profile Ramp Up Rate Activation Time and Temperature Time Above Melting Point Max Peak Temperature Time Within 5 ºC of Peak Ramp Down Rate SnPb 3-4 ºC/sec 60-120 sec @ 140-160 ºC 60-150 sec 240 ºC 10-20 sec 4-6 ºC/sec Pb Free 3-4 ºC/sec 60-180 sec @ 170-200 ºC 60-150 sec 265 ºC 10-20 sec 4-6 ºC/sec Factory Automation and Identification Mimix Designator Package Type -QT QFN (3x3mm) Component Orientation: Number of leads offered W Tape Width P1 Component Pitch P0 Hole Pitch Reel Diameter Units per Reel 16 12mm 8mm 4mm 329mm (13in) 2000 Parts are to be oriented with the PIN 1 closest to the tape's round sprocket holes on the tape’s trailing edge. Note: Tape and Reel packaging is ordered with a -000T suffix. Package is available in 500 unit reels through designated sales channels. Minimum order quantities should be discussed with your local sales representative. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Ordering Information Part Number for Ordering CMM1118-QT-0G00 CMM1118-QT-0G0T PB-CMM1118-0000 Description Matte Tin finished RoHS compliant 3x3 QFN in bulk quantity Matte Tin finished RoHS compliant 3x3 QFN in tape and reel Evaluation Board C a u t i o n : E S D S e n s i t i ve Appropriate precautions in handling, packaging and testing devices must be observed. Proper ESD procedures should be followed when handling this device. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 6 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.