Surface Mount Oscillator, OCXO FR-4 Package, 25.4 mm X 22.1 mm I414 Series I414 Package Product Features: Applications: Available in Both Sinewave and HCMOS outputs RoHS Compliant Telecommunications Data Communications Instrumentation Test and Measurement 22.1 25.4 Frequency 10.000 MHz, 13.000 MHz and 20.000 MHz Output Level HC-MOS Sine ‘0’ = 10% Vcc Max., ‘1’ = 90% VDC typ. +4dBm, ±3dBm Duty Cycle (HC-MOS) 50% ±5% 12.0 2.54 3 4 5 2 Rise / Fall Time 10 nS Max. @ Fo <16 Mhz, 5 nS Max. @ Fo >16 Mhz. 6 1 2.54 Output Load HC-MOS Sine 15 pf 50 ohms Frequency Stability See Frequency Stability Table Supply Voltage 3.3 V ±5% Current (Warm Up) Current @ 25 C 1200 mA Max. 400 mA Control Voltage Pullability 1.65VDC ±1.65 VDC ≥ ±0.5PPM Operating See Operating Temperature Table in Part Number Guide Storage -40 C to +85 C 17.78 7.62 7 23.5 17.78 7.62 3.56 3.30 Recommended Land Pattern Pin Function 1 V control 2 N.C. 3 Vdd 4 Output 5 N.C. 6 N.C 7 GND Dimension Units: mm Part Number Guide Package Input Voltage 3 = 3.3V I414 - Sample Part Number: I414-325A4V-20.000 MHz Operating Temperature Symmetry (Duty Cycle) Output Frequency Stability (in ppm) 7 = 0 C to +50 C 5 = 45 / 55 Max. 3 = 15pF HC-MOS Y = 0.5 V = Controled A = Sine 1 = 0.25 F = Fixed 1 = 0 C to +70 C 6 = -10 C to +75 C 2 = 0.1 3 = -20 C to +70 C 4 = 0.02 Voltage Control Frequency -20.000 MHz 2 = -40 C to +85 C NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise. * Frequency, supply, and load related parameters. ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 04/11_B Specifications subject to change without notice Page 1 Surface Mount Oscillator, OCXO FR-4 Package, 25.4 mm X 22.1 mm I414 Series Pb Free Solder Reflow Profile: Typical Application: *Units are backward compatible with 240C reflow processes Package Information: MSL = N.A. (package does not contain plastic, storage life is unlimited under normal room conditions). Termination = e1 (Sn / Cu / Ag over Ni over Kovar base metal). Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: ILSI and Date Code Line 2: XXXXXX (Part Number detail = I414-XXXXXX-Freq.) Line 2: Frequency ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 04/11_B Specifications subject to change without notice Page 2