NTCALUG01A Series www.vishay.com Vishay BCcomponents NTC Thermistors, Standard Lug Sensors FEATURES • Easy mounting using ring tongue terminal • Rugged construction • Cable of PTFE insulation according to NEMA HP-3, type E, rated 600 VRMS (1) • AEC-Q200 qualified (grade 1) • UL recognized, file E148885 (UL category XGPU2) DESIGN SUPPORT TOOLS Models Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 click logo to get started Note (1) Formerly MIL-W-16878/4, type E Design Tools Available • SPICE models available: www.vishay.com/doc?29178 • NTC curve computation: APPLICATIONS Suitable for surface sensing applications, especially when a good electrical insulation and a good thermal contact with the chassis is required. www.vishay.com/thermistors/ntc-curve-list/ QUICK REFERENCE DATA PARAMETER Resistance value at 25 °C (1) Tolerance on R25-value (1) VALUE UNIT 4.7K to 100K ± 1 to ± 5 % B25/85-value (1) 3435 to 4190 K Tolerance on B25/85-value ± 0.5 to ± 1.5 % Operating temperature range at: Zero dissipation -40 to +150 23 mW/K Thermal time constant (2) 7.5 s Min. dielectric withstanding voltage between terminals and lug 1500 VAC Min. insulation resistance between terminals and lug at 500 VDC 100 M Weight PACKAGING The thermistors are packed in cardboard boxes; the smallest packaging quantity is 500 units. MOUNTING • By means of M3 (Stud 3-4) screw. Leads to be soldered or crimped 40 / 150 / 56 • The device is suitable for screwing e.g. on metal surface 1.6 g Notes (1) Other R -values, B 25 25/85-values, and tolerances are available upon request (2) Measured with screw mounted on an aluminum heatsink of 100 cm2, thickness 1.5 mm, in still air at Tamb = +25 °C Revision: 17-Nov-17 A NTC thermistor chip is soldered to AWG#24 stranded copper leads with PTFE insulation and insulated with epoxy coating. The insulated sensor is attached to a tin plated copper ring lug via a middle buffer layer. The lead wires are twisted and tinned. °C Dissipation factor (2) Climatic category (LCT / UCT / days) DESCRIPTION • The leads are suitable for soldering e.g. on PCB • Consult Vishay for other cable length, cable section, screw sizes, insulation, connector crimping, or other features Document Number: 29092 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTCALUG01A Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D3 D4 D2 D1 L2 E L3 L1 L1 L2 Ø D1 Ø D2 Ø D3 T L3 E D4 Refer to the ordering table 3.8 ± 1 3.7 +0.2 / -0 7.2 ± 0.2 5.5 +0.3 / -0.2 1.0 15.70 ± 0.3 6.2 ± 0.2 1.12 ± 0.1 ELECTRICAL DATA AND ORDERING INFORMATION R25 () R25-TOL. (± %) B25/85 (K) B25/85-TOL. (± %) L1 (mm) DESCRIPTION SAP MATERIAL AND ORDERING NUMBER UL RECOGNIZED (Y / N) 4700 3 3984 0.5 38.1 ± 3.8 NTC Lug01 4.7K 3 % 3984K PTFE AWG#24 38 mm NTCALUG01A472H N 10 000 1 3435 1 38.1 ± 3.8 NTC Lug01 10K 1 % 3435K PTFE AWG#24 38 mm NTCALUG01A103FL Y 10 000 1 3984 0.5 38.1 ± 3.8 NTC Lug01 10K 1 % 3984K PTFE AWG#24 38 mm NTCALUG01A103F Y 10 000 1 3984 0.5 80 ± 5 NTC Lug01 10K 1 % 3984K PTFE AWG#24 80 mm NTCALUG01A103F800 Y 10 000 1 3435 1 80 ± 5 NTC Lug01 10K 1 % 3435K PTFE AWG#24 80 mm NTCALUG01A103F800L Y 10 000 1 3984 0.5 160 +10 / -5 NTC Lug01 10K 1 % 3984K PTFE AWG#24 160 mm NTCALUG01A103F161 Y 10 000 1 3435 1 160 +10 / -5 NTC Lug01 10K 1 % 3435K PTFE AWG#24 160 mm NTCALUG01A103F161L Y 10 000 2 3984 0.5 38.1 ± 3.8 NTC Lug01 10K 2 % 3984K PTFE AWG#24 38 mm NTCALUG01A103G Y 10 000 3 3984 0.5 38.1 ± 3.8 NTC Lug01 10K 3 % 3984K PTFE AWG#24 38 mm NTCALUG01A103H Y 10 000 5 3984 0.5 38.1 ± 3.8 NTC Lug01 10K 5 % 3984K PTFE AWG#24 38 mm NTCALUG01A103J (1) Y 47 000 3 4090 1.5 38.1 ± 3.8 NTC Lug01 47K 3 % 4090K PTFE AWG#24 38 mm NTCALUG01A473H N 100 000 1 4190 1.5 38.1 ± 3.8 NTC Lug01 100K 1 % 4190K PTFE AWG#24 38 mm NTCALUG01A104F N 100 000 2 4190 1.5 38.1 ± 3.8 NTC Lug01 100K 2 % 4190K PTFE AWG#24 38 mm NTCALUG01A104G N Note (1) NTCALUG01A103J identical to NTCALUGE2C90169 = 2381 645 90169 Revision: 17-Nov-17 Document Number: 29092 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000