FME Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, Holder for MSF 125, Panel Mount 125 VAC · 5 A (UL/CSA) Description References - Panel mount, front side General Product Information Fuseholder to MSF 125 Standards Weblinks - UL 512 - CSA C22.2 no. 39 RoHS, CHINA-RoHS, e-Store, SCHURTER-Stock-Check, DistributorStock-Check, CAD-Drawings, Accessories, Product Change Notification (PCN), Product Content Sheet (PCS), White paper Approvals - UL File Number: E39328 Technical Data Fuse-Link Mounting Terminal Rated Voltage Rated Current Degree of Protection Admissible Ambient Air Temp. Climatic Category Material: Socket Material: Terminals Unit Weight (Socket/Cap) Storage Conditions Product Marking Microfuse 125 V Panel Mount Solder 125 VAC 5 A (UL/CSA) IP 40 -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Thermoset, black, UL 94V-0 Silver-Plated Brass 0.3 g 0 °C to 60 °C, max. 70% r.h. , Approvals Abmessungen Soldering Methods Solderability Iron 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree 11.5 mm 11.5 4 ø 8.3 0 ø 6.35 1.5 +0.1 0 4.9 +0.2 0 1.9x1.4 ø 4.7 -0.1 8.1 +0.1 0 4.8 max. 3.2 Drilling diagram Variants Holder l Order Number 0031.7503 Packaging Unit Plastic Bag (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.