CDI-DIODE CDLL02A30 0.2 & 0.5 amp schottky barrier rectifier Datasheet

• 1N6677UR-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS
PER MIL-PRF-19500/610
• 0.2 & 0.5 AMP SCHOTTKY BARRIER RECTIFIERS
• HERMETICALLY SEALED
•LEADLESS PACKAGE FOR SURFACE MOUNT
• METALLURGICALLY BONDED
• DOUBLE PLUG CONSTRUCTION
1N6677UR-1
and
CDLL6675 thru CDLL6677
and
CDLL0.2A20 thru 40
and
CDLL0.5A20 thru 40
MAXIMUM RATINGS, 0.2 AMP DEVICES
Operating Temperature: -65°C to +125°C
Storage Temperature: -65°C to +150°C
Average Rectified Forward Current: 0.2 AMP @ TEC = +100°C
Derating: 8.0 mA / °C above +100°C
ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise specified.
CDI
TYPE
NUMBER
WORKING PEAK
REVERSE
VOLTAGE
VRWM
MAXIMUM
CAPACITANCE @
VR = 0 VOLTS
f =1.0 MHz
MAXIMUM REVERSE
LEAKAGE CURRENT
AT RATED VOLTAGE
MAXIMUM FORWARD VOLTAGE
IR @ +25°C
IR @ +100°C
CT
VOLTS
VF @ 20 mA VF @ 200 mA VF @ 630 mA
VOLTS
VOLTS
VOLTS
µA
mA
PICO FARADS
CDLL6675
20
0.37
0.50
0.70
5.0
0.6
50
CDLL6676
30
0.37
0.50
0.70
5.0
0.6
50
CDLL6677
40
0.37
0.50
0.70
5.0
0.6
50
CDLL0.2A20
20
0.37
0.50
0.70
5.0
0.6
50
CDLL0.2A30
30
0.37
0.50
0.70
5.0
0.6
50
CDLL0.2A40
40
0.37
0.50
0.70
5.0
0.6
50
DIM
D
F
G
G1
S
MILLIMETERS
INCHES
MIN MAX MIN MAX
1.60
1.70 0.063 0.067
0.41
0.55 0.016 0.022
3.30
3.70 .130 .146
2.54 REF.
.100 REF.
0.03 MIN.
.001 MIN.
FIGURE 1
DESIGN DATA
CASE: DO-213AA, Hermetically sealed
glass case. (MELF, SOD-80, LL34)
MAXIMUM RATINGS, 0.5 AMP DEVICES
Operating Temperature: -65°C to +125°C
Storage Temperature: -65°C to +150°C
Average Rectified Forward Current: 0.5 AMP @ TEC = +75°C
Derating: 6.67 mA / °C above TEC = +75°C
LEAD FINISH: Tin / Lead
THERMAL RESISTANCE: (ROJEC):
100 ˚C/W maximum at L = 0 inch
THERMAL IMPEDANCE: (ZJX): 20
˚C/W maximum
ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise specified.
CDI
TYPE
NUMBER
WORKING PEAK
REVERSE
VOLTAGE
VRWM
MAXIMUM
FORWARD VOLTAGE
VF @ 0.1A
VF @ 0.5A
MAXIMUM REVERSE
LEAKAGE CURRENT
AT RATED VOLTAGE
MAXIMUM
CAPACITANCE @
VR = 0 VOLTS
f =1.0 MHz
IR @ +25°C
IR @ +100°C
CT
VOLTS
VOLTS
VOLTS
µA
mA
PICO FARADS
CDLL0.5A20
20
0.50
0.65
10.0
1.0
50
CDLL0.5A30
30
0.50
0.65
10.0
1.0
50
CDLL0.5A40
40
0.50
0.65
10.0
1.0
50
POLARITY: Cathode end is banded.
MOUNTING SURFACE SELECTION:
The Axial Coefficient of Expansion
(COE) Of this Device is Approximately
+6PPM/°C. The COE of the Mounting
Surface System Should Be Selected To
Provide A Suitable Match With This
Device.
22 COREY STREET, MELROSE, MASSACHUSETTS 02176
PHONE (781) 665-1071
FAX (781) 665-7379
WEBSITE: http://www.cdi-diodes.com
E-mail: [email protected]
CDLL6675
CDLL0.2A20
CDLL0.5A20
thru
and
thru
and
thru
CDLL6677
CDLL0.2A40
CDLL0.5A40
TYPICAL REVERSE LEAKAGE CURRENT AT RATED PIV (PULSED)
10.0
IR, REVERSE CURRENT (mA)
1.0
CDLLO.2A40
CDLLO.5A40
0.1
CDLLO.2A20
CDLLO.5A20
0.01
CDLLO.2A30
CDLLO.5A30
0.001
+25
+50
+75
+100
+125
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 1
TYPICAL FORWARD VOLTAGE
IF, FORWARD CURRENT, INSTANTANEOUS (AMPS)
100.0
10.0
1.0
0.1
0.01
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
VF, FORWARD VOLTAGE, INSTANTANEOUS (VOLTS)
FIGURE 2
1.1
Similar pages