AD ADA4857-2YCPZ-R2 Ultralow distortion, low power, low noise, high speed op amp Datasheet

Ultralow Distortion, Low Power,
Low Noise, High Speed Op Amp
ADA4857-1/ADA4857-2
APPLICATIONS
Instrumentation
IF and baseband amplifiers
Active filters
ADC drivers
DAC buffers
CONNECTION DIAGRAMS
ADA4857-1
TOP VIEW
(Not to Scale)
PD 1
8 +VS
FB 2
7 OUT
–IN 3
6 NC
+IN 4
5 –VS
07040-001
High speed
850 MHz, −3 dB bandwidth (G = +1, RL = 1 kΩ, LFSCP)
750 MHz, −3 dB bandwidth (G = +1, RL = 1 kΩ, SOIC)
2800 V/μs slew rate
Low distortion: −88 dBc @ 10 MHz (G = +1, RL = 1 kΩ)
Low power: 5 mA/amplifier @ 10 V
Low noise: 4.4 nV/√Hz
Wide supply voltage range: 5 V to 10 V
Power-down feature
Available in 3 mm × 3 mm 8-lead LFCSP (single), 8-lead SOIC
(single), and 4 mm × 4 mm 16-lead LFCSP (dual)
NC = NO CONNECT
Figure 1. 8-Lead LFCSP (CP)
ADA4857-1
TOP VIEW
(Not to Scale)
FB 1
8
PD
–IN 2
7
+VS
+IN 3
6
OUT
–VS 4
5
NC
NC = NO CONNECT
07040-002
FEATURES
Figure 2. 8-Lead SOIC (R)
ADA4857-2
+IN1 2
12 –VS1
11 NC
NC 3
10 +IN2
–VS2 4
9 –IN2
FB2 8
PD2 7
+VS2 6
OUT2 5
–IN1 1
NC = NO CONNECT
07040-003
14 +VS1
13 OUT1
16 FB1
15 PD1
TOP VIEW
(Not to Scale)
Figure 3. 16-Lead LFCSP (CP)
GENERAL DESCRIPTION
The ADA4857 is a unity gain stable, high speed, voltage feedback
amplifier with low distortion, low noise, and high slew rate. With a
spurious-free dynamic range (SFDR) of −88 dBc @ 10 MHz,
the ADA4857 is an ideal solution in a variety of applications
including ultrasounds, ATE, active filters, and ADC drivers.
The Analog Devices, Inc., proprietary next-generation XFCB
process and innovative architecture enables such high performance
amplifiers.
The ADA4857 has 850 MHz bandwidth, 2800 V/μs slew rate, and
settles to 0.1% in 15 ns. With a wide supply voltage range (5 V to
10 V), the ADA4857 is an ideal candidate for systems that require
high dynamic range, precision, and speed.
The ADA4857-1 amplifier is available in a 3 mm × 3 mm, 8-lead
LFCSP and a standard 8-lead SOIC. The ADA4857-2 is available in
a 4 mm × 4 mm, 16-lead LFSCP. The LFCSP features an exposed
paddle that provides a low thermal resistance path to the PCB. This
path enables more efficient heat transfer and increases reliability.
The ADA4857 works over the extended industrial temperature
range (−40°C to +125°C).
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2008 Analog Devices, Inc. All rights reserved.
ADA4857-1/ADA4857-2
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ..............................................9
Applications....................................................................................... 1
Test Circuits..................................................................................... 15
Connection Diagrams...................................................................... 1
Applications Information .............................................................. 16
General Description ......................................................................... 1
PD Pin Operation....................................................................... 16
Revision History ............................................................................... 2
Capacitive Load Considerations .............................................. 16
Specifications..................................................................................... 3
Recommended Values for Various Gains................................ 16
±5 V Supply ................................................................................... 3
Noise ............................................................................................ 17
+5 V Supply ................................................................................... 4
Circuit Considerations .............................................................. 17
Absolute Maximum Ratings............................................................ 6
PCB Layout ................................................................................. 17
Thermal Resistance ...................................................................... 6
Power Supply Bypassing ............................................................ 17
Maximum Power Dissipation ..................................................... 6
Grounding ................................................................................... 17
ESD Caution.................................................................................. 6
Outline Dimensions ....................................................................... 18
Pin Configurations and Function Descriptions ........................... 7
Ordering Guide .......................................................................... 19
REVISION HISTORY
5/08—Revision 0: Initial Version
Rev. 0 | Page 2 of 20
ADA4857-1/ADA4857-2
SPECIFICATIONS
±5 V SUPPLY
TA = 25°C, G = +2, RG = RF = 499 Ω, RL = 1 kΩ to ground, PD = no connect, unless otherwise noted.
Table 1.
Parameter
DYNAMIC PERFORMANCE
–3 dB Bandwidth (LFCSP/SOIC)
Full Power Bandwidth
Bandwidth for 0.1 dB Flatness (LFCSP/SOIC)
Slew Rate (10% to 90%)
Settling Time to 0.1%
NOISE/Harmonic PERFORMANCE
Harmonic Distortion
Input Voltage Noise
Input Current Noise
DC PERFORMANCE
Input Offset Voltage
Input Offset Voltage Drift
Input Bias Current
Input Bias Current Drift
Input Bias Offset Current
Open-Loop Gain
PD (Power-Down) Pin
PD Input Voltage
Turn-Off Time
Turn-On Time
PD Pin Leakage Current
INPUT CHARACTERISTICS
Input Resistance
Input Capacitance
Input Common-Mode Voltage Range
Common-Mode Rejection Ratio
OUTPUT CHARACTERISTICS
Output Overdrive Recovery Time
Output Voltage Swing
Output Current
Short-Circuit Current
Capacitive Load Drive
Conditions
Min
Typ
G = +1, VOUT = 0.2 V p-p
G = +1, VOUT = 2 V p-p
G = +2, VOUT = 0.2 V p-p
G = +1, VOUT = 2 V p-p, THD < −40 dBc
G = +2, VOUT = 2 V p-p, RL = 150 Ω
G = +1, VOUT = 4 V step
G = +2, VOUT = 2 V step
650
850/750
600/550
400/350
110
75/90
2800
15
MHz
MHz
MHz
MHz
MHz
V/μs
ns
f = 1 MHz, G= +1, VOUT = 2 V p-p (HD2)
f = 1 MHz, G= +1, VOUT = 2 V p-p (HD3)
f = 10 MHz, G= +1, VOUT = 2 V p-p (HD2)
f = 10 MHz, G= +1, VOUT = 2 V p-p (HD3)
f = 50 MHz, G= +1, VOUT = 2 V p-p (HD2)
f = 50 MHz, G= +1, VOUT = 2 V p-p (HD3)
f = 100 kHz
f = 100 kHz
−108
−108
−88
−93
−65
−62
4.4
1.5
dBc
dBc
dBc
dBc
dBc
dBc
nV/√Hz
pA/√Hz
VOUT = −2.5 V to +2.5 V
±2
2.3
−2
24.5
50
57
Chip powered down
Chip enabled
50% off PD to <10% of final VOUT, VIN = 1 V, G = +2
50% off PD to <10% of final VOUT, VIN = 1 V, G = +2
Chip enabled
Chip powered down
≥(VCC − 2)
≤(VCC − 4.2)
55
33
58
80
V
V
μs
ns
μA
μA
Common mode
Differential mode
Common mode
8
4
2
±4
−86
MΩ
MΩ
pF
V
dB
10
±4
±3.7
50
125
10
ns
V
V
mA
mA
pF
VCM = ±1 V
−78
VIN = ±2.5 V, G = +2
RL = 1 kΩ
RL = 100 Ω
Sinking and sourcing
30% overshoot, G = +2
Rev. 0 | Page 3 of 20
Max
±4.5
−3.3
Unit
mV
μV/°C
μA
nA/°C
nA
dB
ADA4857-1/ADA4857-2
Parameter
POWER SUPPLY
Operating Range
Quiescent Current
Quiescent Current (Power Down)
Positive Power Supply Rejection
Negative Power Supply Rejection
Conditions
Min
Typ
4.5
PD ≥ VCC − 2 V
+VS = 4.5 V to 5.5 V, −VS = −5 V
+VS = 5 V, −VS = −4.5 V to −5.5 V
−59
−65
5
350
−62
−68
Max
Unit
10.5
5.5
450
V
mA
μA
dB
dB
Max
Unit
+5 V SUPPLY
TA = 25°C, G = +2, RF = RG = 499 Ω, RL = 1 kΩ to midsupply, PD = no connect, unless otherwise noted.
Table 2.
Parameter
DYNAMIC PERFORMANCE
–3 dB Bandwidth (LFCSP/SOIC)
Full Power Bandwidth
Bandwidth for 0.1 dB Flatness (LFCSP/SOIC)
Slew Rate (10% to 90%)
Settling Time to 0.1%
NOISE/HARMONIC PERFORMANCE
Harmonic Distortion
Input Voltage Noise
Input Current Noise
DC PERFORMANCE
Input Offset Voltage
Input Offset Voltage Drift
Input Bias Current
Input Bias Current Drift
Input Bias Offset Current
Open-Loop Gain
PD (Power-Down) Pin
PD Input Voltage
Turn-Off Time
Turn-On Time
PD Pin Leakage Current
INPUT CHARACTERISTICS
Input Resistance
Input Capacitance
Input Common-Mode Voltage Range
Common-Mode Rejection Ratio
Conditions
Min
Typ
G = +1, VOUT = 0.2 V p-p
G = +1, VOUT = 2 V p-p
G = +2, VOUT = 0.2 V p-p
G = +1, VOUT = 2 V p-p, THD < −40 dBc
G = +2, VOUT = 2 V p-p, RL = 150 Ω
G = +1, VOUT = 2 V step
G = +2, VOUT = 2 V step
595
800/750
500/400
360/300
95
50/40
1500
15
MHz
MHz
MHz
MHz
MHz
V/μs
ns
f = 1 MHz, G= +1, VOUT = 2 V p-p (HD2)
f = 1 MHz, G= +1, VOUT = 2 V p-p (HD3)
f = 10 MHz, G= +1, VOUT = 2 V p-p (HD2)
f = 10 MHz, G= +1, VOUT = 2 V p-p (HD3)
f = 50 MHz, G= +1, VOUT = 2 V p-p (HD2)
f = 50 MHz, G= +1, VOUT = 2 V p-p (HD3)
f = 100 kHz
f = 100 kHz
−92
−90
−81
−71
−69
−55
4.4
1.5
dBc
dBc
dBc
dBc
dBc
dBc
nV/√Hz
pA/√Hz
VOUT = 1.25 V to 3.75 V
±1
4.6
−1.7
24.5
50
57
Chip powered down
Chip enabled
50% off PD to <10% of final VOUT, VIN = 1 V, G = +2
50% off PD to <10% of final VOUT, VIN = 1 V, G = +2
Chip enable
Chip powered down
≥(VCC − 2)
≤(VCC − 4.2)
38
30
8
30
V
V
μs
ns
μA
μA
Common mode
Differential mode
Common mode
8
4
2
1 to 4
−84
MΩ
MΩ
pF
V
dB
VCM = 2 V to 3 V
Rev. 0 | Page 4 of 20
−76
±4.2
−3.3
mV
μV/°C
μA
nA/°C
nA
dB
ADA4857-1/ADA4857-2
Parameter
OUTPUT CHARACTERISTICS
Overdrive Recovery Time
Output Voltage Swing
Output Current
Short-Circuit Current
Capacitive Load Drive
POWER SUPPLY
Operating Range
Quiescent Current
Quiescent Current (Power Down)
Positive Power Supply Rejection
Negative Power Supply Rejection
Conditions
Min
G = +2
RL = 1 kΩ
RL = 100 Ω
Typ
15
1 to 4
1.1 to 3.9
50
75
10
Sinking and sourcing
30% overshoot, G = +2
4.5
PD ≥ VCC − 2 V
+VS = 4.5 V to 5.5 V, −VS = 0 V
+VS = 5 V, −VS = −0.5 V to +0.5 V
Rev. 0 | Page 5 of 20
Max
−58
−65
4.5
250
−62
−68
Unit
ns
V
V
mA
mA
pF
10.5
5
350
V
mA
μA
dB
dB
ADA4857-1/ADA4857-2
ABSOLUTE MAXIMUM RATINGS
Table 3.
Rating
11 V
See Figure 4
−VS + 0.7 V to +VS − 0.7 V
±VS
−VS
−65°C to +125°C
−40°C to +125°C
300°C
150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, θJA is specified
for device soldered in circuit board for surface-mount packages.
θJC
15
34.8
19
⎞ VOUT 2
⎟–
⎟
RL
⎠
RMS output voltages should be considered. If RL is referenced to
−VS, as in single-supply operation, the total drive power is VS ×
IOUT. If the rms signal levels are indeterminate, consider the
worst case, when VOUT = VS/4 for RL to midsupply.
PD = (VS × I S ) +
(VS /4 )2
RL
In single-supply operation with RL referenced to −VS, worst case
is VOUT = VS/2.
Airflow increases heat dissipation, effectively reducing θJA.
In addition, more metal directly in contact with the package
leads and exposed paddle from metal traces, through holes,
ground, and power planes reduce θJA.
Unit
°C/W
°C/W
°C/W
3.0
MAXIMUM POWER DISSIPATION
The maximum safe power dissipation for the ADA4857 is
limited by the associated rise in junction temperature (TJ) on
the die. At approximately 150°C, which is the glass transition
temperature, the properties of the plastic change. Even temporarily
exceeding this temperature limit may change the stresses that
the package exerts on the die, permanently shifting the parametric
performance of the ADA4857. Exceeding a junction temperature of
175°C for an extended period can result in changes in silicon
devices, potentially causing degradation or loss of functionality.
2.5
2.0
ADA4857-2 (LFCSP)
1.5
1.0
ADA4857-1 (LFCSP)
0.5
ADA4857-1 (SOIC)
0
–40 –30 –20 –10 0 10 20 30 40 50 60 70 80 90 100 110 120
AMBIENT TEMPERATURE (°C)
07040-004
θJA
115
94.5
68.2
⎛V V
PD = (VS × I S ) + ⎜⎜ S × OUT
RL
⎝ 2
Figure 4 shows the maximum safe power dissipation in the
package vs. the ambient temperature for the SOIC and LFCSP
packages on a JEDEC standard 4-layer board. θJA
values are approximations.
Table 4.
Package Type
8-Lead SOIC
8-Lead LFCSP
16-Lead LFSCP
PD = Quiescent Power + (Total Drive Power − Load Power)
MAXIMUM POWER DISSIPATION (W)
Parameter
Supply Voltage
Power Dissipation
Common-Mode Input Voltage
Differential Input Voltage
Exposed Paddle Voltage
Storage Temperature Range
Operating Temperature Range
Lead Temperature (Soldering, 10 sec)
Junction Temperature
The power dissipated in the package (PD) is the sum of the
quiescent power dissipation and the power dissipated in the
die due to the ADA4857 drive at the output. The quiescent
power is the voltage between the supply pins (VS) times the
quiescent current (IS).
Figure 4. Maximum Power Dissipation vs. Temperature for a 4-Layer Board
ESD CAUTION
Rev. 0 | Page 6 of 20
ADA4857-1/ADA4857-2
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
–IN 3
TOP VIEW
(Not to Scale)
FB 1
8 +VS
7 OUT
–IN 2
NC = NO CONNECT
PD
+VS
TOP VIEW
+IN 3 (Not to Scale) 6 OUT
–VS 4
5 NC
6 NC
5 –VS
+IN 4
8
ADA4857-1
7
NC = NO CONNECT
07040-006
FB 2
ADA4857-1
07040-005
PD 1
Figure 6. 8-Lead SOIC Pin Configuration
Figure 5. 8-Lead LFCSP Pin Configuration
Table 5. 8-Lead LFCSP Pin Function Descriptions
Table 6. 8-Lead SOIC Pin Function Descriptions
Pin No.
1
2
3
4
5
6
7
8
Pin No.
1
2
3
4
5
6
7
8
Mnemonic
PD
FB
−IN
+IN
−VS
NC
OUT
+VS
Description
Power Down
Feedback
Inverting Input
Noninverting Input
Negative Supply
No Connect
Output
Positive Supply
Rev. 0 | Page 7 of 20
Mnemonic
FB
−IN
+IN
−VS
NC
OUT
+VS
PD
Description
Feedback
Inverting Input
Noninverting Input
Negative Supply
No Connect
Output
Positive Supply
Power Down
14 +VS1
13 OUT1
16 FB1
15 PD1
ADA4857-1/ADA4857-2
–IN1 1
NC 3
ADA4857-2
TOP VIEW
(Not to Scale)
–VS2 4
12 –VS1
11 NC
10 +IN2
FB2 8
PD2 7
+VS2 6
OUT2 5
9 –IN2
NC = NO CONNECT
07040-007
+IN1 2
Figure 7. 16-Lead LFCSP Pin Configuration
Table 7. 16-Lead LFCSP Pin Function Descriptions
Pin No.
1
2
3, 11
4
5
6
7
8
9
10
12
13
14
15
16
Mnemonic
−IN1
+IN1
NC
−VS2
OUT2
+VS2
PD2
FB2
−IN2
+IN2
−VS1
OUT1
+VS1
PD1
FB1
Description
Inverting Input 1
Noninverting Input 1
No Connect
Negative Supply 2
Output 2
Positive Supply 2
Power Down 2
Feedback 2
Inverting Input 2
Noninverting Input 2
Negative Supply 1
Output 1
Positive Supply 1
Power Down 1
Feedback 1
Rev. 0 | Page 8 of 20
ADA4857-1/ADA4857-2
TYPICAL PERFORMANCE CHARACTERISTICS
3
2
2
G = +2
–2
–3
–4
G = +10
–5
–6
G = +5
–7
–8
VS = ±5V
RL = 1kΩ
VOUT = 0.2V p-p
–9
–10
1
10
100
1000
FREQUENCY (MHz)
–3
–4
G = +10
–5
G = +5
–6
–7
–8
VS = ±5V
RL = 1kΩ
VOUT = 2V p-p
–9
1
10
100
3
9
2
8
7
10pF
5pF
6
CLOSED-LOOP GAIN (dB)
0
–1
–2
±5V
–3
–4
–5
–6
+5V
–7
5
4
NO CAP LOAD
3
2
1
0
–1
–2
–3
–4
–8
G = +1
RL = 1kΩ
VOUT = 0.2V p-p
–9
1
G = +2
VS = ±5V
RL = 1kΩ
VOUT = 0.2V p-p
–5
–6
10
100
1000
FREQUENCY (MHz)
–7
2
1
1
0
0
CLOSED-LOOP GAIN (dB)
3
2
–40°C
–2
–3
–4
–5
+25°C
–7
+125°C
FREQUENCY (MHz)
1000
1000
–1
–2
–3
4V p-p
–4
–5
–6
–7
G = +1
VS = ±5V
RL = 100Ω
–9
100
100
1V p-p
–8
–10
07040-010
–8 G = +1
VS = ±5V
–9 RL = 1kΩ
VOUT = 0.2V p-p
–10
1
10
10
Figure 12. Small Signal Frequency Response for Various Capacitive Loads (LFCSP)
3
–6
1
FREQUENCY (MHz)
Figure 9. Small Signal Frequency Response for Various Supply Voltages (LFCSP)
–1
1000
Figure 11. Large Signal Frequency Responses for Various Gains (LFCSP)
07040-009
CLOSED-LOOP GAIN (dB)
G = +2
–2
FREQUENCY (MHz)
1
CLOSED-LOOP GAIN (dB)
–1
–10
Figure 8. Small Signal Frequency Responses for Various Gains (LFCSP)
–10
G = +1
0
07040-012
–1
1
07040-011
G = +1
0
1
10
100
1000
FREQUENCY (MHz)
Figure 10. Small Signal Frequency Response for Various Temperatures (LFCSP)
Rev. 0 | Page 9 of 20
Figure 13. Large Signal Frequency Response vs. VOUT (LFCSP)
07040-013
1
NORMALIZED CLOSED-LOOP GAIN (dB)
3
07040-008
NORMALIZED CLOSED-LOOP GAIN (dB)
T = 25°C, (G = +1, RF = 0 Ω, RG open and G = +2, RF = RG = 499 Ω), unless otherwise noted.
ADA4857-1/ADA4857-2
3
9
8
2
RL = 1kΩ
1
5
CLOSED-LOOP GAIN (dB)
4
3
2
RL = 100Ω
1
0
–1
–2
–3
–4
1
10
100
1000
FREQUENCY (MHz)
–6
–7
G = +1
VS = ±5V
VOUT = 2V p-p
1
10
100
1000
Figure 17. Large Signal Frequency Response for Various Resistive Loads (LFCSP)
3
1
NORMALIZED CLOSED-LOOP GAIN (dB)
2
G = +1
0
–1
G = +2
–2
–3
–4
G = +10
–5
–6
G = +5
–7
–8
VS = 5V
RL = 1kΩ
VOUT = 0.2V p-p
–9
1
10
100
1000
FREQUENCY (MHz)
–50
G = +1
1
0
G = +2
–1
–2
–3
–4
G = +10
–5
–6
G = +5
–7
–8
VS = ±5V
RL = 1kΩ
VOUT = 0.2V p-p
–9
1
10
1000
Figure 18. Small Signal Frequency Response for Various Gains (SOIC)
–40
VS = ±5V
VOUT = 2V p-p
RL= 1kΩ
–50
G = +1
VS = ±5V
VOUT = 2V p-p
–60
DISTORTION (dBc)
–60
G = +1, HD2
–70
–80
G = +2, HD2
G = +1, HD3
–90
RL = 100Ω, HD3
–70
–80
RL = 100Ω, HD2
–90
RL = 1kΩ, HD2
–100
–100
–110
–110
RL = 1kΩ, HD3
1
10
100
FREQUENCY (MHz)
07040-016
G = +2, HD3
–120
0.2
100
FREQUENCY (MHz)
Figure 15. Small Signal Frequency Response for Various Gains (LFCSP)
–40
2
–10
07040-015
NORMALIZED CLOSED-LOOP GAIN (dB)
–5
FREQUENCY (MHz)
3
DISTORTION (dBc)
RL = 100Ω
–4
–10
Figure 14. Small Signal Frequency Response for Various Resistive Loads (LFCSP)
–10
–3
07040-018
–7
–2
–9
07040-014
–6
RL = 1kΩ
–8
G = +2
VS = ±5V
VOUT = 0.2V p-p
–5
0
–1
Figure 16. Harmonic Distortion vs. Frequency and Gain (LFCSP)
–120
0.2
1
10
100
FREQUENCY (MHz)
Figure 19. Harmonic Distortion vs. Frequency and Load (LFCSP)
Rev. 0 | Page 10 of 20
07040-019
CLOSED-LOOP GAIN (dB)
6
07040-017
7
ADA4857-1/ADA4857-2
–40
0.5
G = +2
VS = ±5V
RL= 1kΩ
–50
VOUT = 2V p-p
G = +2
VS = ±5
0.4
HD3, f = 10MHz
0.3
HD2, f = 10MHz
SETTLING TIME (%)
–70
–80
–90
HD3, f = 1MHz
HD2, f = 1MHz
0.1
OUTPUT
0
–0.1
–0.2
–0.3
–110
INPUT
07040-023
–100
0.2
–0.4
2
3
4
5
6
7
OUTPUT VOLTAGE (V p-p)
8
–0.5
TIME (5ns/DIV)
Figure 20. Harmonic Distortion vs. Output Voltage
6.3
6.3
VS = ±5V
G = +2
RL= 150Ω
6.1
VOUT = 2V p-p
6.0
5.9
VOUT = 0.2V p-p
1
10
100
FREQUENCY (MHz)
Figure 21. 0.1 dB Flatness vs. Frequency for Various Output Voltages (SOIC)
2.0
6.0
VOUT = 2V p-p
5.9
VOUT = 0.2V p-p
5.7
2.5
VS = ±5V
RL = 1kΩ
G = +2
4V p-p
2.0
100
VS = ±5V
RL = 1kΩ
G = +1
1.5
OUTPUT VOLTAGE (V)
2V p-p
OUTPUT VOLTAGE (V)
10
Figure 24. 0.1 dB Flatness vs. Frequency for Various Output Voltages (LFCSP)
1.5
1.0
0.5
0
–0.5
–1.0
–1.5
2V p-p
1.0
0.5
0
–0.5
–1.0
07040-022
–1.5
–2.0
–2.5
1
FREQUENCY (MHz)
2.5
4V p-p
6.1
5.8
07040-021
5.8
5.7
VS = ±5V
G = +2
RL= 150Ω
6.2
CLOSED-LOOP GAIN (dB)
6.2
CLOSED-LOOP GAIN (dB)
Figure 23. Short-Term Settling Time (LFCSP)
07040-024
1
07040-020
–120
–2.0
–2.5
TIME (10ns/DIV)
Figure 22. Large Signal Transient Response for Various Output Voltages (SOIC)
07040-025
DISTORTION (dBc)
–60
TIME (10ns/DIV)
Figure 25. Large Signal Transient Response for Various Output Voltages (LFCSP)
Rev. 0 | Page 11 of 20
ADA4857-1/ADA4857-2
0.25
2.0
VS = ±5V
RL = 1kΩ
G = +1
0.20
OUTPUT VOLTAGE (V)
1.2
0.10
CL = 1.5pF
0
–0.05
–0.10
–0.15
CL = 10pF
–0.20
–0.25
0
–0.4
–0.8
RL = 100Ω
–1.6
–2.0
TIME (10ns/DIV)
TIME (10ns/DIV)
Figure 29. Large Signal Transient Response for Various Load Resistances (SOIC)
2.0
0.25
RL = 1kΩ
G = +1
0.20
0.15
1.6
0.10
0.05
VS = ±5V
G = +1
RL = 1kΩ
1.2
VS = ±5V
OUTPUT VOLTAGE (V)
VS = ±2.5V
0
–0.05
–0.10
0.8
0.4
0
–0.4
–0.8
–1.2
–0.20
–0.25
–2.0
TIME (10ns/DIV)
Figure 27. Small Signal Transient Response for Various Supply Voltages (LFCSP)
TIME (10ns/DIV)
Figure 30. Large Signal Transient Response for Various Load Resistances (LFCSP)
100
CLOSED-LOOP INPUT IMPEDANCE (kΩ)
VS = ±5V
100
10
G = +5
1
G = +2
10
100
1000
FREQUENCY (MHz)
07040-028
1
0.1
0.1
RL = 100Ω
–1.6
07040-030
07040-027
–0.15
Figure 28. Output Impedance vs. Frequency for Various Gains
VS = ±5V
G = +2
10
1
0.1
0.01
1
10
100
FREQUENCY (MHz)
Figure 31. Closed-Loop Input Impedance vs. Frequency
Rev. 0 | Page 12 of 20
1000
07040-031
OUTPUT VOLTAGE (V)
RL = 1kΩ
0.4
–1.2
Figure 26. Small Signal Transient Response for Various Capacitive Loads (LFCSP)
CLOSED-LOOP OUTPUT IMPEDANCE (Ω)
0.8
07040-029
0.05
07040-026
OUTPUT VOLTAGE (V)
0.15
1000
VS = ±5V
G = +2
1.6
ADA4857-1/ADA4857-2
GAIN
40
–20
–10
–40
–20
–60
–80
30
–100
20
–120
10
–140
0
0
–40
–50
LFCSP
–60
–70
–80
10
–90
–180
1000
100
–100
0.1
07040-032
1
FREQUENCY (MHz)
1
8
OUTPUT
RL = 100Ω
–2
–4
OUTPUT
RL = 1kΩ
–6
INPUT
–8
2
0
–2
–4
OUTPUT
RL = 1kΩ
2 × INPUT
–6
OUTPUT
RL = 100Ω
07040-036
OUTPUT VOLTAGE (V)
0
07040-033
OUTPUT VOLTAGE (V)
4
2
–8
TIME (40ns/DIV)
TIME (200ns/DIV)
Figure 33. Input Overdrive Recovery for Various Resistive Loads
0
1000
VS = ±5V
G = +2
6
4
10
100
Figure 35. PD Isolation vs. Frequency
VS = ±5V
G = +1
6
10
FREQUENCY (MHz)
Figure 32. Open-Loop Gain and Phase vs. Frequency
8
SOIC
–30
–160
–10
0.1
G = +2
VS = ±5V
RL = 1kΩ
PD = 3V
07040-035
50
0
PD ISOLATION (dB)
60
Figure 36. Output Overdrive Recovery for Various Resistive Loads
–30
VS = ±5V
RL= 1kΩ
VS = ±5V
RL= 1kΩ
–40
–10
–20
CMRR (dB)
–50
–30
–40
–50
–60
–70
+PSRR
–60
–80
–80
0.1
–PSRR
1
10
100
1000
FREQUENCY (MHz)
–90
0.1
1
10
100
1000
FREQUENCY (MHz)
Figure 37. Common-Mode Rejection Ratio (CMRR) vs. Frequency
Figure 34. Power Supply Rejection Ratio (PSRR) vs. Frequency
Rev. 0 | Page 13 of 20
07040-037
–70
07040-034
PSRR (dB)
OPEN-LOOP GAIN (dB)
VS = ±5V
RL = 1kΩ
PHASE
OPEN-LOOP PHASE (Degrees)
70
ADA4857-1/ADA4857-2
1000
10
1
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
100
10
1
1
10
100
1k
10k
100k
FREQUENCY (Hz)
1M
Figure 40. Input Voltage Noise vs. Frequency
Figure 38. Input Current Noise vs. Frequency
3.5
50 N = 238
MEAN: 5.00
SD: 0.02
3.0
40
VOLTAGE (V)
2.5
30
20
PD INPUT
2.0
1.5
1.0
0.5
OUTPUT
10
0
4.85
4.90
4.95
5.00
5.05
SUPPLY CURRENT (mA)
5.10
5.15
Figure 39. Supply Current
07040-043
0
07040-042
COUNT
VS = ±5V
07040-041
VOLTAGE NOISE (nV/√Hz)
VS = ±5V
07040-050
CURRENT NOISE (pA/√Hz)
100
–0.5
TIME (20µs/DIV)
Figure 41. Disable/Enable Switching Speed
Rev. 0 | Page 14 of 20
ADA4857-1/ADA4857-2
TEST CIRCUITS
+VS
+VS
10µF
10µF
+
+
0.1µF
0.1µF
RG
RF
0.1µF
VOUT
VIN
RL
49.9Ω
CL
49.9Ω
0.1µF
07040-049
–VS
RL
10µF
07040-047
0.1µF
+
+
VOUT
RSNUB
VIN
10µF
0.1µF
40Ω
–VS
Figure 42. Noninverting Load Configuration
Figure 45. Typical Capacitive Load Configuration
+VS
AC
+VS
10µF
+
49.9Ω
0.1µF
VOUT
VOUT
RL
RL
49.9Ω
AC
07040-045
0.1µF
–VS
–VS
Figure 43. Positive Power Supply Rejection
Figure 46. Negative Power Supply Rejection
+VS
10µF
+
1kΩ
0.1µF
1kΩ
0.1µF
VOUT
1kΩ
53.6Ω
RL
1kΩ
0.1µF
–VS
07040-046
10µF
+
VIN
07040-048
+
10µF
Figure 44. Common-Mode Rejection
Rev. 0 | Page 15 of 20
ADA4857-1/ADA4857-2
APPLICATIONS INFORMATION
PD PIN OPERATION
CAPACITIVE LOAD CONSIDERATIONS
The PD pin is used to power down the chip, which reduces the
quiescent current and the overall power consumption. It is low
enabled which means that the chip is on with full power when
the PD pin input voltage is low (see Table 8). Note that PD
does not put the output in a high-Z state, which means that
the ADA4857 should not be used as a multiplexer.
When driving a capacitive load, RSNUB is used to reduce the
peaking (see Figure 45). An optimum resistor value of 40 Ω is
found to maintain the peaking within 1 dB for any capacitive
load up to 40 pF.
Table 8. PD Operation Table Guide
PD Pin Voltage
≤+0.8 V
≥+3 V
≤−1.7 V
≥+0.5 V
≤+0.8 V
≥+3 V
No connect
Supply Voltage
±5 V
±5 V
±2.5 V
±2.5 V
+5 V
+5 V
All
Chip
Enabled
Powered down
Enabled
Powered down
Enabled
Powered down
Enabled
B
RECOMMENDED VALUES FOR VARIOUS GAINS
Table 9 provides a useful reference for determining various
gains and associated performance. Resistors RF and RG are
kept low to minimize their contribution to the overall noise
performance of the amplifier.
Table 9. Various Gain and Recommended Resistor Values Associated with Conditions; VS = ±5 V, TA = 25°C, RL = 1 kΩ, RT = 49.9 Ω
Gain
+1
+2
+5
+10
RF (Ω)
0
499
499
499
RG (Ω)
N/A
499
124
56.2
−3 dB SS BW (MHz),
VOUT = 200 mV p-p
850
360
90
43
Slew Rate (V/μs),
VOUT = 2 V Step
2350
1680
516
213
Rev. 0 | Page 16 of 20
ADA4857 Voltage
Noise (nV/√Hz), RTO
4.4
8.8
22.11
43.47
Total System
Noise (nV/√Hz), RTO
4.49
9.89
23.49
45.31
ADA4857-1/ADA4857-2
NOISE
CIRCUIT CONSIDERATIONS
To analyze the noise performance of an amplifier circuit,
identify the noise sources and then determine if the source has a
significant contribution to the overall noise performance of the
amplifier. To simplify the noise calculations, noise spectral densities
were used rather than actual voltages to leave bandwidth out of the
expressions (noise spectral density, which is generally expressed
in nV/√Hz, is equivalent to the noise in a 1 Hz bandwidth).
Careful and deliberate attention to detail when laying out the
ADA4857 board yields optimal performance. Power supply
bypassing, parasitic capacitance, and component selection all
contribute to the overall performance of the amplifier.
The noise model shown in Figure 47 has six individual noise
sources: the Johnson noise of the three resistors, the op amp
voltage noise, and the current noise in each input of the amplifier.
Each noise source has its own contribution to the noise at the
output. Noise is generally referred to input (RTI), but it is often
simpler to calculate the noise referred to the output (RTO) and
then divide by the noise gain to obtain the RTI noise.
VN, R2
R2
GAIN FROM
=
A TO OUTPUT
4kTR2
A
VN, R1
4kTR1
VN, R3
R1
NOISE GAIN =
R2
NG = 1 +
R1
IN–
VN
VOUT
R3
IN+
4kTR3
VN2 + 4kTR3 + 4kTR1
RTI NOISE =
R2
R1 + R2
+ IN+2R32 + IN–2 R1 × R2
R1 + R2
2
2
+ 4kTR2
R1
R1 + R2
RTO NOISE = NG × RTI NOISE
Because the ADA4857 can operate up to 850 MHz, it is essential
that RF board layout techniques be employed. All ground and
power planes under the pins of the ADA4857 should be cleared
of copper to prevent the formation of parasitic capacitance between
the input pins to ground and the output pins to ground. A single
mounting pad on the SOIC footprint can add as much as 0.2 pF
of capacitance to ground if the ground plane is not cleared from
under the mounting pads. The low distortion pinout of the
ADA4857 increases the separation distance between the inputs
and the supply pins, which improves the second harmonics. In
addition, the feedback pin reduces the distance between the
output and the inverting input of the amplifier, which helps
minimize the parasitic inductance and capacitance of the
feedback path, reducing ringing and peaking.
POWER SUPPLY BYPASSING
GAIN FROM
= – R2
B TO OUTPUT
R1
2
07040-073
B
PCB LAYOUT
Figure 47. Op Amp Noise Analysis Model
All resistors have a Johnson noise that is calculated by
(4kBTR) .
where:
k is Boltzmann’s Constant (1.38 × 10–23 J/K).
B is the bandwidth in Hertz.
T is the absolute temperature in Kelvin.
R is the resistance in ohms.
Power supply bypassing for the ADA4857 was optimized for
frequency response and distortion performance. Figure 42
shows the recommended values and location of the bypass
capacitors. The 0.1 μF bypassing capacitors should be placed as
close as possible to the supply pins. Power supply bypassing is
critical for stability, frequency response, distortion, and PSR
performance. The capacitor between the two supplies helps
improve PSR and distortion performance. The 10 μF electrolytic
capacitors should be close to the 0.1 μF capacitors but it is not as
critical. In some cases, additional paralleled capacitors can help
improve frequency and transient response.
GROUNDING
A simple relationship that is easy to remember is that a 50 Ω
resistor generates a Johnson noise of 1 nV/√Hz at 25°C.
In applications where noise sensitivity is critical, care must
be taken not to introduce other significant noise sources to
the amplifier. Each resistor is a noise source. Attention to the
following areas is critical to maintain low noise performance:
design, layout, and component selection. A summary of noise
performance for the amplifier and associated resistors can be
seen in Table 9.
Ground and power planes should be used where possible. Ground
and power planes reduce the resistance and inductance of the
power planes and ground returns. The returns for the input,
output terminations, bypass capacitors, and RG should all be
kept as close to the ADA4857 as possible. The output load
ground and the bypass capacitor grounds should be returned
to the same point on the ground plane to minimize parasitic
trace inductance, ringing, overshoot and to improve distortion
performance. The ADA4857 LFSCP packages feature an exposed
paddle. For optimum electrical and thermal performance,
solder this paddle to ground. For more information on high
speed circuit design, see A Practical Guide to High-Speed
Printed-Circuit-Board Layout at www.analog.com.
Rev. 0 | Page 17 of 20
ADA4857-1/ADA4857-2
OUTLINE DIMENSIONS
3.25
3.00 SQ
2.75
0.60 MAX
0.50
BSC
0.60 MAX
5
2.95
2.75 SQ
2.55
TOP
VIEW
PIN 1
INDICATOR
8
4
12° MAX
1
0.50
0.40
0.30
0.70 MAX
0.65 TYP
1.89
1.74
1.59
PIN 1
INDICATOR
0.05 MAX
0.01 NOM
0.30
0.23
0.18
SEATING
PLANE
0.20 REF
061507-B
0.90 MAX
0.85 NOM
1.60
1.45
1.30
EXPOSED
PAD
(BOTTOM VIEW)
Figure 48. 8-Lead Lead Frame Chip Scale Package [LFCSP_VD]
3 mm × 3 mm Body, Very Thin, Dual Lead (CP-8-2)
Dimensions shown in millimeters
5.00 (0.1968)
4.80 (0.1890)
8
1
5
4
6.20 (0.2441)
5.80 (0.2284)
1.27 (0.0500)
BSC
1.75 (0.0688)
1.35 (0.0532)
0.25 (0.0098)
0.10 (0.0040)
0.51 (0.0201)
0.31 (0.0122)
COPLANARITY
0.10
SEATING
PLANE
0.50 (0.0196)
0.25 (0.0099)
45°
8°
0°
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012-A A
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
012407-A
4.00 (0.1574)
3.80 (0.1497)
Figure 49. 8-Lead Standard Small Outline Package [SOIC_N]
(R-8)
Dimensions shown in millimeters and (inches)
4.00
BSC SQ
PIN 1
INDICATOR
0.65 BSC
TOP
VIEW
12° MAX
3.75
BSC SQ
0.75
0.60
0.50
(BOTTOM VIEW)
13
12
9
8
16
PIN 1
INDICATOR
1
2.25
2.10 SQ
1.95
5
4
0.25 MIN
1.95 BSC
0.80 MAX
0.65 TYP
0.05 MAX
0.02 NOM
SEATING
PLANE
0.35
0.30
0.25
0.20 REF
COPLANARITY
0.08
COMPLIANT TO JEDEC STANDARDS MO-220-VGGC
Figure 50. 16-Lead Lead Frame Chip Scale Package [LFCSP_VQ]
4 mm × 4 mm Body, Very Thin Quad
(CP-16-4)
Dimensions shown in millimeters
Rev. 0 | Page 18 of 20
021207-A
1.00
0.85
0.80
0.60 MAX
0.60 MAX
ADA4857-1/ADA4857-2
ORDERING GUIDE
Model
ADA4857-1YCPZ-R2 1
ADA4857-1YCPZ-RL1
ADA4857-1YCPZ-R71
ADA4857-1YRZ1
ADA4857-1YRZ-R71
ADA4857-1YRZ-RL1
ADA4857-2YCPZ-R21
ADA4857-2YCPZ-RL1
ADA4857-2YCPZ-R71
1
Temperature Range
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
Package Description
8-Lead LFCSP_VD
8-Lead LFCSP_VD
8-Lead LFCSP_VD
8-lead SOIC_N
8-lead SOIC_N
8-lead SOIC_N
16-Lead LFSCP_VQ
16-Lead LFSCP_VQ
16-Lead LFSCP_VQ
Z = RoHS Compliant Part.
Rev. 0 | Page 19 of 20
Package Option
CP-8-2
CP-8-2
CP-8-2
R-8
R-8
R-8
CP-16-4
CP-16-4
CP-16-4
Ordering Quantity
250
5,000
1,500
250
5,000
1,500
250
5,000
1,500
Branding
H15
H15
H15
ADA4857-1/ADA4857-2
NOTES
©2008 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D07040-0-5/08(0)
Rev. 0 | Page 20 of 20