revision for dwg # 1PB-ABx ch.no. - - 11/19/2007 revised by Philipp E. 1 n38 mm o40 mm [1.6 in] 2 5 6 7 date description original design [1.5 in] rev 3 4 16 mm [.6 in] * = Operator includes 3x ARW1.2 and 1x ARW3.2 ** = Switch Contacts include Contact element washer and two SC24 installation screws, if more than two contact blocks are used, additional screws must be purchased seperatly (SC45, SC65 or SC90) ITEM DESCRIPTION max. 6 mm [.25 in] 1* 16 mm [.6 in] 55 mm [2.2 in] 98 mm [3.9 in] unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. 2* 3 4** 5** 6** 7** titel CAT. NO. AB1 AB2 AB3 Booted Operator AB4 AB6 AB8 Rubber washer ARW1.2/ARW3.2 Panel Contact Element washer Switch Contacts S11 Switch Contacts S12 Contact Block Installation Screws SC25/SC45/SC65/SC90 COLOR White Black Green Red Blue Yellow Black Black Red Yellow - MIN. QTY. MAX. QTY. 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 2 1 2 1 2 2 2 30 mm Non-Illuminated Booted Momentary Metal Operator ABx (x=color) drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/19/2007 drawing no.: 11/19/2007 1PB-ABx 11/19/2007 scale: rev.: - sheet: 1 of: 1