MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 MUR420 and MUR460 are Preferred Devices SWITCHMODEt Power Rectifiers These state−of−the−art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes. http://onsemi.com Features • • • • • • • • • Ultrafast 25 ns, 50 ns and 75 ns Recovery Times 175°C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction Reverse Voltage to 600 V Shipped in Plastic Bags, 500 per Bag Available in Tape and Reel, 1500 per Reel, by Adding a “RL’’ Suffix to the Part Number Pb−Free Packages are Available* ULTRAFAST RECTIFIERS 4.0 AMPERES, 50−600 VOLTS Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 1.1 Gram (Approximately) • Finish: All External Surfaces Corrosion Resistant and • • AXIAL LEAD CASE 267 STYLE 1 Terminal Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Polarity: Cathode indicated by Polarity Band MARKING DIAGRAM A MUR 4xx YYWW G G A = Assembly Location MUR4xx = Device Number x = 05, 10, 15, 20, 40, 60 YY = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 July, 2006 − Rev. 11 1 Publication Order Number: MUR420/D MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 MAXIMUM RATINGS MUR Symbol 405 410 415 420 440 460 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 150 200 400 600 V Average Rectified Forward Current (Square Wave) (Mounting Method #3 Per Note 2) IF(AV) 4.0 @ TA = 80°C 4.0 @ TA = 40°C A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions, half wave, single phase, 60 Hz) IFSM 125 110 A Rating Operating Junction Temperature & Storage Temperature *65 to +175 TJ, Tstg °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS MUR Rating Symbol Maximum Thermal Resistance, Junction−to−Ambient 405 410 415 420 440 460 Unit °C/W See Note 2 RqJA ELECTRICAL CHARACTERISTICS MUR Rating Symbol Maximum Instantaneous Forward Voltage (Note 1) (iF = 3.0 A, TJ = 150°C) (iF = 3.0 A, TJ = 25°C) (iF = 4.0 A, TJ = 25°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, TJ = 150°C) (Rated dc Voltage, TJ = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) (IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A) trr Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/ms, Recovery to 1.0 V) tfr Controlled Avalanche Energy (Maximum) Waval 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%. http://onsemi.com 2 405 410 415 420 440 460 Unit V 0.71 0.88 0.89 1.05 1.25 1.28 150 5 250 10 35 25 75 50 25 50 mA ns 5 ns mJ MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 ORDERING INFORMATION Device Shipping † Package MUR405 Axial Lead* MUR405G Axial Lead* MUR410 Axial Lead* MUR410G Axial Lead* MUR410RL Axial Lead* MUR410RLG Axial Lead* MUR415 Axial Lead* MUR415G Axial Lead* MUR415RL Axial Lead* MUR415RLG Axial Lead* MUR420 Axial Lead* MUR420G Axial Lead* MUR420RL Axial Lead* MUR420RLG Axial Lead* MUR440 Axial Lead* MUR440G Axial Lead* MUR440RL Axial Lead* MUR440RLG Axial Lead* MUR460 Axial Lead* MUR460G Axial Lead* MUR460FF Axial Lead* MUR460FFG Axial Lead* MUR460RL Axial Lead* MUR460RLG Axial Lead* 500 Units / Bag 1500 / Tape & Reel 500 Units / Bag 1500 / Tape & Reel 500 Units / Bag 1500 / Tape & Reel 500 Units / Bag 1500 / Tape & Reel 500 Units / Bag 500 Units / Bag 1500 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *These packages are inherently Pb−Free. http://onsemi.com 3 MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 MUR405, MUR410, MUR415, MUR420 100 IR, REVERSE CURRENT (m A) 70 50 30 10 7.0 100°C 25°C 0 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (V) Figure 2. Typical Reverse Current 3.0 2.0 TJ = 175°C IF(AV), AVERAGE FORWARD CURRENT (A) 25°C 100°C 1.0 0.7 0.5 0.3 0.2 0.1 0.2 PF(AV), AVERAGE POWER DISSIPATION (WATTS) TJ = 175°C 5.0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 8 7 Rated VR RqJA = 28°C/W DC 6 5 SQUAREWAVE 4 3 2 1 0 0 1.2 20 40 60 80 100 120 140 160 180 200 vF, INSTANTANEOUS VOLTAGE (V) TA, AMBIENT TEMPERATURE (°C) Figure 1. Typical Forward Voltage Figure 3. Current Derating (Mounting Method #3 Per Note 2) 10 200 9.0 (Capacitive IPK =20 IAV Load) 8.0 5.0 10 TJ = 25°C 7.0 C, CAPACITANCE (pF) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 0.008 0.004 0.002 6.0 dc 5.0 4.0 SQUAREWAVE 3.0 2.0 50 40 30 1.0 0 100 90 80 70 60 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 20 8.0 0 IF(AV), AVERAGE FORWARD CURRENT (A) 10 20 30 40 VR, REVERSE VOLTAGE (V) Figure 4. Power Dissipation Figure 5. Typical Capacitance http://onsemi.com 4 50 MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 MUR440, MUR460 400 200 IR, REVERSE CURRENT (m A) 20 10 7.0 3.0 TJ = 175°C 2.0 25°C 100°C 25°C 0 100 200 300 400 500 600 700 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 6 5 4 SQUAREWAVE 3 2 1 0 20 40 60 80 100 120 140 160 180 200 TA, AMBIENT TEMPERATURE (°C) Figure 8. Current Derating (Mounting Method #3 Per Note 2) 12 40 5.0 dc 10 10 8.0 (Capacitive IPK =20 IAV Load) 4.0 2.0 0 1.0 DC vF, INSTANTANEOUS VOLTAGE (VOLTS) SQUAREWAVE 0 Rated VR RqJA = 28°C/W 7 Figure 6. Typical Forward Voltage 14 6.0 8 0 2.3 C, CAPACITANCE (pF) PF(AV), AVERAGE POWER DISSIPATION (WATTS) 100°C 1.0 IF(AV), AVERAGE FORWARD CURRENT (A) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 5.0 TJ = 175°C 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 0.008 0.004 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 30 TJ = 25°C 20 10 9.0 8.0 7.0 6.0 5.0 4.0 10 0 IF(AV), AVERAGE FORWARD CURRENT (A) Figure 9. Power Dissipation 10 20 30 40 VR, REVERSE VOLTAGE (VOLTS) Figure 10. Typical Capacitance http://onsemi.com 5 50 MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 NOTE 2 — AMBIENT MOUNTING DATA Data shown for thermal resistance junction−to−ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA Lead Length, L (IN) 1/8 1/4 1/2 3/4 50 51 53 55 58 59 61 63 Units °C/W °C/W 28 °C/W 3 MOUNTING METHOD 1 P.C. Board Where Available Copper Surface area is small. ÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉ L L MOUNTING METHOD 2 Vector Push−In Terminals T−28 ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ L L MOUNTING METHOD 3 P.C. Board with 1−1/2 ″ x 1−1/2 ″ Copper Surface ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ L = 1/2 ″ Board Ground Plane http://onsemi.com 6 MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 PACKAGE DIMENSIONS AXIAL LEAD CASE 267−05 (DO−201AD) ISSUE G K D A 1 B 2 K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B D K INCHES MIN MAX 0.287 0.374 0.189 0.209 0.047 0.051 1.000 −−− MILLIMETERS MIN MAX 7.30 9.50 4.80 5.30 1.20 1.30 25.40 −−− STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MUR420/D