Surface Mount Aluminum Electrolytic Capacitors FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION • WIDE TEMPERATURE -40° ~+105°C • LONG LIFE (+105°C, 2000 HOURS) • 6.3 mm MAXIMUM HEIGHT • DESIGNED FOR REFLOW..SOLDERING NACH Series RoHS Compliant includes all homogeneous materials *See Part Number System for Details CHARACTERISTICS 4 ~ 50Vdc 0.1 ~ 220µF -40°C ~ +105°C ±20% (M), ±10% (K)* 0.01CV or 3µA whichever is greater W.V. (Vdc) S.V. (Vdc) Dissipation Factor Z-40°C/Z+20°C Z-55/Z+20°C Rated Voltage Range Rate Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C Working Voltage/Surge Voltage Max. Tan δ @120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz 4 5 0.50 7 12 6.3 8.0 0.30 4 8 10 13 0.22 3 6 16 20 0.16 2 4 25 32 0.14** 2 4 35 44 0.12 2 3 Capacitance Change Within ±25% of initial measured value Tan δ Less than 200% of specified value Leakage Current Less than specified value Load Life Test @105°C 2,000 Hours 50 63 0.12 2 3 * Optional ± 10% (K) Tolerance available on most values. Contact factory for availability. ** DF is 0.16 for NACH470M25V6.3X8 MAXIMUM ESR (Ω AT 120Hz AND 20OC) MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 120Hz AND 105OC) Cap. (µF) 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 4.0 34 61 82 6.3 26 29 46 71 - Working Voltage (Vdc) 10 16 25 35 22 28 28 39 55 43 65 70 - Cap. (µF) 50 1.0 2.0 3.0 5.0 10 16 16 23 35 - 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 4.0 17.7 8.31 3.77 6.3 22.6 15.1 10.6 4.98 - Working Voltage (Vdc) 10 16 25 35 49.5 26.6 19.9 12.1 9.05 11.1 7.05 5.66 - 50 1993 906 604 424 199 90.6 60.4 42.4 19.9 - RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency Hz Correction Factor 50 ≤ f<100 100 ≤ f<1K 1K ≤ f<10K 10K ≤ f < 100K 0.8 1.0 1.3 1.5 PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] ® 12 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NACH Series STANDARD PRODUCT AND CASE SIZE TABLE DφxL (mm) ��� �µ�� ���� ��� ��� Dφ ������� ������� ����� ��� � ��� �� �� �� �� �� � � � � � ����� ���� ��� � � � � � � ����� ���� ��� � � � � � � ����� ���� ��� � � � � � � ����� ��� ��� � � � � � � ����� ��� ��� � � � � � � ����� ��� ��� � � � � � � ����� ��� ��� � � � � ����� � ����� �� ��� � � � ����� � ����� ������� � ����� � ����� � ������� � P ����� � ������� � � � � B � ������� � �� ��� �� ��� � ����� �� ��� ����� ����� ��� ��� ����� ������� � � � � � ��� ��� ������� � � � � � � L 0.3mm max. + I I - W A DIMENSIONS (mm) Case Size 4 x 6.3 5 x 6.3 6.3 x 6.3 Dφ ±0.5 4.0 5.0 6.3 L max. 6.3 6.3 6.3 A ±0.2 4.3 5.3 6.6 B ±0.2 4.3 5.3 6.6 I ±0.2 1.8 2.2 2.5 W 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 P ±0.2 1.0 1.5 2.2 PART NUMBER SYSTEM NACH 100 M 35V Series 5x6.3 TR 13 F RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 13