3•GenPurpose_SMD 16.9.2005 14:50 Page 16 General Purpose Tweezers Handcrafted to perfect tip symmetry and balance, polished edges, superior no-scratch/antiglare satin finish The right tweezers and material for a successful application. 119.SA 6'' 150mm fine tips, serrated tips and grips 119A.SA 6'' 150mm as 119, strong, serrated tips and grips 120A.SA 4 1/4'' 110mm fine, strong serrated tips and grips 121.SA 6 1/4'' 160mm very strong, blunt serrated tips and grips 121M.SA 6 1/4'' 160mm as 120, thin serrated tips and serrated grips 122.SA 6'' 150mm fine, bent serrated tips and grips 123.SA 6'' 150mm Fine, double bent serrated tips and grips 124.SA 6'' 150mm as 122, strong serrated tips and serrated grips 231.SA 4 3/4'' 120mm fine, serrated tips 16 - General Purpose Tweezers 321.SA 4 3/4'' 120mm flat rounded tips PTFE coated 3•GenPurpose_SMD 16.9.2005 14:50 Page 17 456.SA 5'' 130mm fine serrated tips 475.SA 5 1/2'' 140mm strong blunt precision serrated tips and serrated grips 647.SA 647.S 4 3/4'' 120mm strong blunt precision tips serrated tips and grips 648.SA 648.S 6'' 150mm strong, fine, alignment pin serrated tips and grips PB.NP 649.SA 649.S 6'' 150mm strong, fine, bent, alignment pin serrated tips and grips 5 3/4'' 145mm; 0.14'' 3.6mm nickel plated tweezers to hold pearls and ball bearings Boley Tweezers Ergonomic, general purpose tweezers available in different materials for specific applications. GG.SA GG.NP AA.SA AA.S AA.NP AA.TA 5'' 130mm general purpose straight fine tips 5'' 130mm very slim tips, max visibility NN.SA NN.NP MM.SA MM.NP 5'' 130mm general purpose strong fine tips 4 1/2'' 115mm as MM, short Boley Tweezers - 17 3•GenPurpose_SMD 15.9.2005 13:26 Page 18 RR.SA RR.NP 5 3/4'' 145mm heavy duty tweezers strong tips, rounded edges D.NP 3 3/4'' 95mm cutting nickel plated tweezers rounded edges SMD Tweezers Smooth handling and positioning of all SMD components. Different tips and angles for specific jobs. Satin antiglare finish and ergonomic design. Modifications or special models available on request. Available as reverse action model. SM100.SA 4 1/2'' 115mm reverse action for handling PCBs with SMDs SM101.SA 4 1/2'' 115mm reverse action. for soldering and de-soldering 8,14 or 16 Lead SMDs SM102.SA 4 1/2'' 115mm reverse action. for soldering and de-soldering 20,28,44 and 68 LCCC and PLCC pad devices SM103.SA 4 1/2'' 115mm for handling and positioning 2 and 3 lead SOT packages at 45° angle SM104.SA 4 3/4'' 120mm for handling and positioning 3 lead SOT packages, monolithic chip capacitors, etc. SM105.SA 4 3/4'' 120mm special design for positioning all SOT packages vertically SM106.SA 4 3/4'' 120mm for positioning all SOT packages horizontally. With flat base tips (4 mm long) 18 - SMD Tweezers SM107.SA 4 3/4'' 120mm for positioning all flat devices at 60° angle. 3•GenPurpose_SMD 15.9.2005 13:26 Page 19 SM108.SA 4 3/4'' 120mm for positioning and soldering 1mm wide components. tips are grooved inside SM109.SA 4 /4'' 120mm same as SM 108 but with 45° tips without anti-crush feature SM110.SA 4 3/4'' 120mm for positioning monolithic chips capacitors, grooved tips SM111.SA 4 3/4'' 120mm for positioning 5 mm monolithic chip capacitors with flat base grooved tips ( 2 mm long) SM113.SA SM112.SA 4 3/4'' 120mm for positioning 5 mm monolithic chip capacitors at 60°. Grooved tips 4 3/4'' 120mm 3mm long tips bent at 60° angle one forked blade lead entry SM114.SA 4 3/4'' 120mm same as SM113 but with straight tips for vertical holding SM115.SA 4 3/4'' 120mm grooved tips at 30° angle for holding and positioning cylindrical devices ( up to 1 mm diam.) SM116.SA 4 3/4'' 120mm grooved straight tips. for vertical positioning of cylindrical devices (up to 1 mm diam. or more) SM117.SA 4 3/4'' 120mm for positioning SOT packages at 30° angle K5SMD.SA SMD precision tweezers set SM103, SM107, SM108, SM111, SM115 top quality hard/foam wallet SMD Tweezers - 19