Alpha Wire FIT350-34 Heat shrinkable tubing Datasheet

ALPHA WIRE COMPANY
Part Number: FIT350
Page 1 of 2 Pages
A.
Construction
1) Tubing Type
2) Tubing Material
3) Color(s)
Part Number
FIT350-3/64
FIT350-1/16
FIT350-3/32
FIT350-1/8
FIT350-3/16
FIT350-1/4
FIT350-3/8
FIT350-1/2
FIT350-3/4
FIT350-1IN
B.
CUSTOMER PRODUCT SPECIFICATION
Issue:
Issue Date:
Effective Date:
3
12/31/2008
3/1/2009
Heat Shrinkable Tubing
Irradiated PVDF (Kynar)
CLEAR
Minimum
Supplied ID
(In)
0.046
0.063
0.093
0.125
0.187
0.250
0.375
0.500
0.750
1.000
Maximum
Recovered
ID (In)
0.023
0.031
0.046
0.062
0.093
0.125
0.187
0.250
0.375
0.500
Nominal
Recovered Wall
Thickness (In)
0.010
0.010
0.010
0.010
0.010
0.012
0.012
0.012
0.017
0.019
Industry Approvals
1) UL
Standard 224
VW-1
2) CSA International
Standard 198
3) Other
AMS-DTL-23053/8
REACH Regulation (EC 1907/2006)
4) EU Directive 2002/95/EC(RoHS):
All materials used in the manufacture of this part are in compliance with EU
Directive 2002/95/EU regarding the restriction of use of certain hazardous
substances in electrical and electronic equipment. Consult Alpha Wire's web
site for compliance Date of Manufacture.
C. Physical & Mechanical Properties
1) Temperature Range
-55 to 175°C
2) Shrink Ratio
Approximately 2:1
3) Full Recovery Temperature
175°C
4) Tensile Strength
5000psi, Min
ASTM D638
5) Elongation
150%, Min
ASTM D638
6) Low Temperature Flex(-55°C)
no cracking
AMS-DTL-23053
7) Heat Resistance(250°C,168hrs)
100% Elongation, Min
ASTM D638
8) Heat Shock(300°C,4hrs)
no cracking
AMS-DTL-23053
9) Secant Modulus
1x105 psi, Min
ASTM D882
10) Longitudinal Change
+/-10%
AMS-DTL-23053
11) Specific Gravity
1.80, Max
ASTM D792
12) Deformation(125°C,1 hr)
50% Max
UL 224
13) Shelf Life
5 Years @ 0 to 35°C
D. Electrical Properties
1) Dielectric Strength
800 V/mil, Min
ASTM D876
13
ASTM D876
2) Volume Resistivity
1x10 ohm-cm, Min
E. Chemical Properties
1) Water Absorption
0.50%, Max
ASTM D570
2) Fluid Resistance(23°C,24 Hrs)
5000 PSI, Min
AMS-DTL-23053
3) Vacuum Outgassing - CVCM
0.03%, Max
ASTM E595
4) Vacuum Outgassing - TML
0.11%, Max
ASTM E595
5) Halogen Free
No
Although Alpha Wire Company ("Alpha") makes every reasonable effort to ensure their accuracy at the time of publication, information and
specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications
does not ensure product availability.
Alpha provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or
implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,
even if Alpha has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of
or in connection with the use, or inability to use, the information or specifications described herein.
711 Lidgerwood Ave Elizabeth, NJ 07207-0711
Toll Free 1-800-52 ALPHA • T: 1-908-925-8000 • F: 908-925-5411 • Email: [email protected]
www.alphawire.com
ALPHA WIRE COMPANY
Part Number: FIT350
Page 2 of 2 Pages
F.
CUSTOMER PRODUCT SPECIFICATION
Issue:
Issue Date:
Effective Date:
6) Lead Free
Other
1) Packaging
a) FIT350-3/64
25X4 FT, 32X6 IN
b) FIT350-1/16
25X4 FT, 28X6 IN
c) FIT350-3/32
25X4 FT, 24X6 IN
d) FIT350-1/8
25X4 FT, 20X6 IN
e) FIT350-3/16
25X4 FT, 16X6 IN
f) FIT350-1/4
25X4 FT, 12X6 IN
g) FIT350-3/8
25X4 FT, 8X6 IN
h) FIT350-1/2
5X4 FT, 4X6 IN
i) FIT350-3/4
5X4 FT, 2X6 IN
j) FIT350-1IN
5X4 FT, 1X6 IN
3
12/31/2008
3/1/2009
Yes
Although Alpha Wire Company ("Alpha") makes every reasonable effort to ensure their accuracy at the time of publication, information and
specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications
does not ensure product availability.
Alpha provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or
implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,
even if Alpha has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of
or in connection with the use, or inability to use, the information or specifications described herein.
711 Lidgerwood Ave Elizabeth, NJ 07207-0711
Toll Free 1-800-52 ALPHA • T: 1-908-925-8000 • F: 908-925-5411 • Email: [email protected]
www.alphawire.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Alpha Wire:
FIT3503/64 CL103
Similar pages