Power Inductors - Shielded CTEP105S Series From 0.22 µH to 5.0 µH Not shown at actual size. ctparts.com SPECIFICATIONS CTEP105SF Please specify “F” for RoHS compliant * The actual current when temperature of coil becomes ∆T=40°C (Ta=20°C) Part Number Inductance (µH ±20%) L Test Freq. (kHz) DCR Max. Ω) (mΩ *Temp. Rise Current(typ.) (A) CTEP105S_-0R2N CTEP105S_-0R4M 0.22±30% 0.45 100 100 1.7 2.4 19.0 17.7 CTEP105S_-0R8M CTEP105S_-1R3M CTEP105S_-1R8M CTEP105S_-2R5M CTEP105S_-3R2M CTEP105S_-4R0M CTEP105S_-5R0M 0.8 1.3 1.8 2.5 3.2 4.0 5.0 100 100 100 100 100 100 100 4.1 5.3 7.5 10.5 12.4 18.0 23.8 13.0 11.2 9.0 7.8 7.4 6.2 4.9 RoHS Compliant Available PHYSICAL DIMENSIONS Size mm inches A B C Max. Max. Max. D E 10.4 10.4 5.6 5.5 2.9 3.8 1.4 2.6 5.5 .409 .409 .22 .217 .114 .150 .055 .102 .217 A CHARACTERISTICS B H E F G J PAD LAYOUT H Unit: mm 8.5 2.5 2.0 3.8 2.9 11.0 Technologies 05.25.05 CENTRAL G H C D Description: SMD shielded power inductor Applications: Power supplies for VTR, OA equipment, LCD televisions, PC notebooks, portable communication equipment, DC/DC converters, etc. Operating Temperature: -40°C to +125°C Inductance Tolerance: ±20%, ±30% Testing: Tested on a HP4285A at 100 KHz , 0.25Vrms , 0Adc Packaging: Tape & Reel Miscellaneous: RoHS Compliant available. Marking: Parts are marked with inductance code Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. F Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice J