Unictron H2U34W1H1Q0300 3.2 x 1.6 x 0.5 wifi / hdmi ceramic chip antenna (aa106) Datasheet

3.2 x 1.6 x 0.5 WiFi/HDMI Ceramic Chip Antenna (AA106)
1.
Explanation of Product Number
H
2
U
3
4
W
(1)
1
H
(2)
(3)
1
Q
(4)
0
3
0
0
(5)
Product Code:
(1) Product Categories:
4: ceramic substrate chip antenna
(2) Dimensions:
W1: 3.2 x 1.6 x 0.5 (mm)
(3) Material:
H: AS 6
(4) Working Frequency:
1Q: 5150~5900MHz
(5) Antenna Series:
03: serial number
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
1
OF
A
12
2.
Features
*Stable and reliable in performances
*Compact size
*RoHS compliance
*SMT processes compatible
3.
Applications
*IEEE802.11a (5150~5900 MHz).
*HDMI PCMCIA cards or USB dongle
4.
Description
Unictron’s chip antenna series are specially designed for WiFi/HDMI application.
Based on Unictron’s proprietary design and processes, this chip antenna has
excellent stability and sensitivity to consistently provide high signal reception
efficiency.
5.
Electrical Specifications (40x40(mm) ground plane)
5-1.
Characteristics
Outline Dimensions
Ground Plane
Center Frequency*
Bandwidth(under -10dB return loss)
VSWR
Impedance
Polarization
Gain
Specifications
Unit
3.2x1.6x0.5
40x40
5500
750 min.
2 max.
50
Linear Polarization
mm
mm
MHz
MHz
3.4 (typical)
dBi
79 (typical)
0±20 max
(@ -40℃~85℃)
%
Peak
Efficiency
Temperature Coefficient
of Frequency
Ω
ppm/℃
*Center frequency will be offset to working frequency according to the conditions of user’s ground plane and radome.
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
2
OF
A
12
5-2.
Return Loss(S11)
6.
Smith Chart(S11)
Antenna Dimensions & Test Board(unit: mm)
a. Antenna Dimensions
Feed Side
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
3
OF
A
12
b. Test Board with Antenna
unit: mm
Unit:mm
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
4
OF
A
12
7.
Radiation Pattern (40x40(mm) ground plane)
7-1. 3D Gain Pattern at 5150 MHz
Z
X
Y
Z
X
Y
Z
Z
X
Y
X
Y
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
5
OF
A
12
7-2. 3D Gain Pattern at 5350 MHz
Z
X
Y
Z
X
Y
Z
Z
X
Y
X
Y
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
6
OF
A
12
7-3. 3D Gain Pattern at 5700 MHz
Z
X
Y
Z
X
Y
Z
Z
X
Y
X
Y
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
7
OF
A
12
7-4. 3D Gain Pattern at 5850 MHz
Z
X
Y
Z
X
Y
Z
Z
X
Y
X
Y
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
8
OF
A
12
7-5. Efficiency Table
Frequency(GHz)
5.000 5.050 5.100 5.150 5.200 5.250 5.300 5.350 5.400 5.450
Efficiency(dB)
-1.75 -1.88 -1.82 -1.77 -1.03 -1.54 -1.83 -1.68 -1.57 -1.41
Efficiency(%)
66.83 64.86 65.75 66.53 78.89 70.15 65.61 67.92 69.66 72.28
Gain(dBi)
2.66
Frequency(GHz)
5.500 5.550 5.600 5.650 5.700 5.750 5.800 5.850 5.900
Efficiency(dB)
-0.97 -0.97 -1.40 -1.84 -1.83 -1.42 -1.28 -1.55 -2.53
Efficiency(%)
79.98 79.98 72.44 65.46 65.61 72.11 74.47 69.98 55.85
Gain(dBi)
3.42
2.22
3.35
2.00
3.14
2.76
2.80
3.22
2.86
2.56
3.28
2.25
3.59
2.53
3.40
2.77
3.45
2.56
7-6. Efficiency vs. Frequency
Efficiency vs. Frequency
90.00
Efficiency(%)
80.00
70.00
60.00
50.00
5.000 5.050 5.100 5.150 5.200 5.250 5.300 5.350 5.400 5.450 5.500 5.550 5.600 5.650 5.700 5.750 5.800 5.850 5.900
Frequency(GHz)
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
9
OF
A
12
8.
Layout Guide:
a. Solder Land Pattern:
Land pattern for soldering (gray marking areas) is as shown below. Depending on
Customer’s requirement, matching circuit as shown below is also recommended .
1
2
3
Top View
Back View
Unit:mm
b. Matching circuit:(Center frequency is about 5500MHz at 40x40(mm) ground plane)
System Matching Circuit Component
Location
Description
Vendor
1
0.3pF
DARFNO(0402)
2
4.7pF
DARFNO(0402)
3
0.47pF
DARFNO(0402)
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
10
OF
A
12
9.
Soldering Conditions:
a. Typical Soldering Profile for Lead-free Process
20-40s
260°C
Temterature (°C)
217°C
150-200°C
Pre-heating
60-150s
60-180s
Time (s.)
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
11
OF
A
12
10.
Packing:
(1) Quantity/Reel: 6000pcs/Reel
(2) Plastic tape:
2.1 Tape Dimensions(unit: mm)
Feature
Specifications Tolerances
W
12.00
±0.30
P
8.00
±0.10
E
1.75
±0.10
F
5.50
±0.10
P2
2.00
±0.10
D
1.50
+0.10
-0.00
D1
--±0.10
Po
4.00
±0.10
10Po
40.00
±0.20
1. Cumulative tolerance of 10 sprocket hole pitch: ±0.20mm
2. Carrier camber not to exceed 1mm in 250mm
3. Ao and Bo measured on a plane above the inside bottom
of the pocket.
4. Ko measured from a plane on the inside bottom of the
pocket to the top surface of the carrier.
5. All dimensions meet EIA-481-B requirements.
6. Material: □ Clear Non Anti-Static Polystyrene.
■ Black Conductive Polystyrene.
2.2 Pocket Dimensions(unit: mm)
Feature Specifications Tolerances
Ao
1.90
+0.20
-0.10
Bo
3.50
Ko
0.60
±0.05
t
0.30
±0.05
11. Storage Conditions:
(1) Temperature: -25℃ to 85℃
(2) Relative Humidity: 20% to 70%
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit:mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Chinling
Approved By : Herbert
TITLE: 3.2 x 1.6 x 0.5 WiFi/HDMI
Ceramic Chip Antenna (AA106)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
REV.
H2U34W1H1Q0300
PAGE
12
OF
A
12
Similar pages