BCW68GL General Purpose Transistor PNP Silicon Features • NSV Prefix for Automotive and Other Applications Requiring • www.onsemi.com Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant COLLECTOR 3 1 BASE 2 EMITTER MAXIMUM RATINGS Rating Symbol Value Unit Collector−Emitter Voltage VCEO −45 Vdc Collector−Base Voltage VCBO −60 Vdc Emitter−Base Voltage VEBO −5.0 Vdc IC −800 mAdc Collector Current − Continuous 3 SOT−23 CASE 318 STYLE 6 1 2 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. MARKING DIAGRAM THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Total Device Dissipation FR−5 Board (Note 1) TA = 25°C Derate above 25°C PD 225 mW 1.8 mW/°C RqJA 556 °C/W PD 300 mW Thermal Resistance, Junction−to−Ambient Total Device Dissipation Alumina Substrate (Note 2) TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Junction and Storage Temperature 2.4 mW/°C RqJA 417 °C/W TJ, Tstg −55 to +150 DG MG G DG M G = Specific Device Code = Date Code* = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION °C 1. FR−5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in 99.5% alumina. Device Package Shipping† BCW68GLT1G, NSVBCW68GLT1G SOT−23 (Pb−Free) 3000 / Tape & Reel BCW68GLT3G SOT−23 (Pb−Free) 10000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2015 March, 2015 − Rev. 7 1 Publication Order Number: BCW68GLT1/D BCW68GL ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Collector−Emitter Breakdown Voltage (IC = −10 mAdc, IB = 0) V(BR)CEO −45 − − Vdc Collector−Emitter Breakdown Voltage (IC = −10 mAdc, VEB = 0) V(BR)CES −60 − − Vdc Emitter−Base Breakdown Voltage (IE = −10 mAdc, IC = 0) V(BR)EBO −5.0 − − Vdc − − − − −20 −10 nAdc mAdc − − −20 nAdc 120 160 60 − − − 400 − − OFF CHARACTERISTICS Collector Cutoff Current (VCE= −45 Vdc, IE = 0) (VCE= −45 Vdc, IB = 0, TA = 150°C) ICES Emitter Cutoff Current (VEB = −4.0 Vdc, IC = 0) IEBO ON CHARACTERISTICS DC Current Gain (IC = −10 mAdc, VCE = −1.0 Vdc) (IC = −100 mAdc, VCE = −1.0 Vdc) (IC = −300 mAdc, VCE = −1.0 Vdc) hFE − Collector−Emitter Saturation Voltage (IC = −500 mAdc, IB = −50 mAdc) VCE(sat) − − −0.7 Vdc Base−Emitter Saturation Voltage (IC = −500 mAdc, IB = −50 mAdc) VBE(sat) − − −2.0 Vdc fT 100 − − MHz Output Capacitance (VCB= −10 Vdc, IE = 0, f = 1.0 MHz) Cobo − − 18 pF Input Capacitance (VEB= −0.5 Vdc, IC = 0, f = 1.0 MHz) Cibo − − 105 pF Noise Figure (IC= −0.2 mAdc, VCE = −5.0 Vdc, RS = 1.0 kW, f = 1.0 kHz, BW = 200 Hz) NF − − 10 dB SMALL−SIGNAL CHARACTERISTICS Current−Gain − Bandwidth Product (IC = −20 mAdc, VCE = −10 Vdc, f = 100 MHz) Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 BCW68GL TYPICAL CHARACTERISTICS 500 1 VCE = 1 V VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) hFE, DC CURRENT GAIN 150°C 400 25°C 300 200 −55°C 100 0 150°C 25°C −55°C 0.1 0.01 0.001 0.01 0.1 0.001 1 0.1 1 IC, COLLECTOR CURRENT (A) Figure 1. DC Current Gain vs. Collector Current Figure 2. Collector Emitter Saturation Voltage vs. Collector Current VBE(on), BASE−EMITTER VOLTAGE (V) 1.0 0.01 IC, COLLECTOR CURRENT (A) 1.1 −55°C IC/IB = 10 0.9 25°C 0.8 150°C 0.7 0.6 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 1 1.2 1.1 VCE = 5 V 1.0 −55°C 0.9 0.8 25°C 0.7 0.6 0.5 150°C 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 3. Base Emitter Saturation Voltage vs. Collector Current Figure 4. Base Emitter Voltage vs. Collector Current 1000 fT, CURRENT−GAIN−BANDWIDTH PRODUCT (MHz) VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) IC/IB = 10 VCE = 1 V TA = 25°C 100 10 0.1 1 10 100 1000 IC, COLLECTOR CURRENT (mA) Figure 5. Current Gain Bandwidth Product vs. Collector Current www.onsemi.com 3 1 BCW68GL VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS -1.0 TJ = 25°C -0.8 IC = -500 mA -0.6 -0.4 IC = -300 mA -0.2 IC = -100 mA IC = -10 mA 0 -0.01 -0.1 -1.0 -10 IB, BASE CURRENT (mA) -100 100 +1.0 qVC for VCE(sat) C, CAPACITANCE (pF) θV, TEMPERATURE COEFFICIENTS (mV/°C) Figure 6. Saturation Region 0 -1.0 -2.0 -1.0 qVB for VBE -10 -100 IC, COLLECTOR CURRENT (mA) Cib 10 Cob 1.0 -0.1 -1000 Figure 7. Temperature Coefficients -1.0 -10 VR, REVERSE VOLTAGE (VOLTS) Figure 8. Capacitances www.onsemi.com 4 -100 BCW68GL PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AP NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. D SEE VIEW C 3 HE E DIM A A1 b c D E e L L1 HE q c 1 2 b 0.25 e q A L A1 MIN 0.89 0.01 0.37 0.09 2.80 1.20 1.78 0.10 0.35 2.10 0° MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.13 0.18 2.90 3.04 1.30 1.40 1.90 2.04 0.20 0.30 0.54 0.69 2.40 2.64 −−− 10 ° MIN 0.035 0.001 0.015 0.003 0.110 0.047 0.070 0.004 0.014 0.083 0° INCHES NOM 0.040 0.002 0.018 0.005 0.114 0.051 0.075 0.008 0.021 0.094 −−− MAX 0.044 0.004 0.020 0.007 0.120 0.055 0.081 0.012 0.029 0.104 10° STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR L1 VIEW C SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 0.8 0.031 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent− Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BCW68GLT1/D