FB321611 (1206) Series – SMD MULTILAYER FERRITE CHIP BEADS (HIGH IMPEDANCE) Rev. A A. Electrical Specifications: P/N FB321611Z260 FB321611Z310 FB321611Z600 FB321611Z800 FB321611Z121 FB321611Z221 FB321611Z301 FB321611Z601 FB321611Z102 FB321611Z122 FB321611Z202 FB321611U260 FB321611U310 FB321611U500 FB321611U700 FB321611U800 FB321611U121 FB321611U221 FB321611U301 FB321611U601 FB321611U102 FB321611U122 FB321611U152 FB321611U202 FB321611G070 FB321611G600 FB321611G800 FB321611G221 FB321611G301 FB321611G601 FB321611G102 FB321611G152 FB321611G202 FB321611B190 Impedance (Ω) ±25% @100MHz 26 31 60 80 120 220 300 600 1000 1200 (at 50 MHz) 2000 (at 30 MHz) 26 31 50 70 80 120 220 300 600 1000 1200 (at 50 MHz) 1500 (at 50 MHz) 2000 (at 30 MHz) 7 60 80 220 300 600 1000 1500 2000 19 I rms. Max. (mA) 500 500 400 600 500 400 400 300 200 200 200 600 600 600 800 800 500 500 800 600 500 500 500 500 500 500 500 600 500 300 300 300 200 600 DCR Max. (Ω) 0.10 0.10 0.15 0.10 0.15 0.20 0.25 0.30 0.45 0.50 0.60 0.10 0.10 0.10 0.15 0.15 0.20 0.25 0.15 0.20 0.45 0.50 0.50 0.50 0.15 0.15 0.15 0.20 0.25 0.30 0.45 0.45 0.60 0.10 B. Dimensions: mm (Inch) Series FB321611 Tol. a b c d e f g 3.2 (0.126) ± 0.2 (0.008 ) 1.6 (0.063) ± 0.2 (0.008 ) 1.1 (0.043) ± 0.2 (0.008 ) 0.5 (0.020) ± 0.3 (0.012 ) 4.40 (0.173) 1.80 (0.071) 1.20 (0.047) Typ. Typ. Typ. C. Part Number Key: FB 32 16 11 Y XXX IMPEDANCE VALUE MATERIAL CODE: L, U, Z, B or G DIMENSIONS: LENGTH (a) x WIDTH (b) x THICKNESS (c) FAMILY: FB Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 FB321611 (1206) Series – SMD MULTILAYER FERRITE CHIP BEADS (HIGH IMPEDANCE) Rev. A D. Materials: ITEM Initial Permeability (µiac): Maximum Permeability (µm): Saturation Flux Density at 10 Oe: Curie Temperature(Tc): Volume Resistivity (ρ): Temperature Coefficient: Density: ------- L 25 125 B 45 125 Material Code G 110 250 U 200 450 Z 500 900 Gauss °C 2000 >200 2000 >200 1700 >130 1400 >100 1500 >130 Ω-m 1/10000°C 100000 10 100000 10 100000 13 100000 5 100000 12 g/cm³ 4.8 4.8 4.8 4.8 4.8 UNIT E. Impedance Characteristics of Materials: a. b. c. d. e. f. Z Material is for applications whose blocking regions are near 100 MHz. L Material, an improvement of B Material has sharp impedance characteristic at high frequency. G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low insertion loss at high frequency. Different materials are available for different application range. With one material, higher impedance has sharper characteristics. Please confirm the signal wave form to choose suitable products. F. General Information: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. FB321611-yxxx, “FB321611” = P/N, “y” = Material, “xxx” = Impedance. Tolerance: ±25% Small and lightweight surface mounting type. Dimensions are suitable for automatic mounting High-density packaging with a pitch of 2.54 mm (0.1 inch) max. is possible. This series requires less space and have greater EMI suppression effects. Different types with the same shape are available. Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability. Applicable to both flow and IR reflow soldering. High impedance covers wide frequency ranges. TI series can be used in high current circuits due to its low DC resistance. Operating temperature: -40°C to +125ºC Impedance and Current Range: From 7 Ω (500 mA) to 2000 Ω (200 mA) Unspecified values available on request. MSL: Level 1. G. Applications: 1. 2. 3. 4. 5. Game Consoles Set Top Boxes Cables Modems Computers Mobile Communication Devices (Cell Phones, Radios, etc.) Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989