® MUR3020CTR thru MUR3060CTR Pb MUR3020CTR/MUR3040CTR/MUR3060CTR Pb Free Plating Product 30 Ampere Heatsink Dual Common Anode Fast Recovery Half Bridge Rectifiers TO-220AB Unit : inch (mm) .419(10.66) .387(9.85) .196(5.00) .139(3.55) MIN .054(1.39) .045(1.15) Automotive Inverters and Solar Inverters Plating Power Supply,SMPS,Motor Control and UPS Car Audio Amplifiers and Sound Device Systems .177(4.5)MAX .038(0.96) .019(0.50) Mechanical Data Case: Heatsink TO-220AB Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 Polarity: As marked on diode body Mounting position: Any Weight: 2.2 gram approximately .1(2.54) .624(15.87) .548(13.93) Application .50(12.7)MIN .269(6.85) .163(4.16) .226(5.75) Features Latest P/G technology with super fast recovery time Low forward voltage drop High current capability Low reverse leakage current High surge current capability .025(0.65)MAX .1(2.54) Case Case Negative Positive Common Cathode Common Anode Suffix "CTR" Suffix "CT" Case Case Doubler Tandem Polarity Suffix "CTD" Series Tandem Polarity Suffix "CTS" MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL MUR3020CTR MUR3040CTR MUR3060CTR UNIT Maximum Recurrent Peak Reverse Voltage VRRM 200 400 600 V Maximum RMS Voltage VRMS 140 280 420 V VDC 200 400 600 V Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TC=125 C IF(AV) 30.0 A IFSM 300 A Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 15.0 A VF 0.98 o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR 1.3 1.7 V 5 uA 100 uA Maximum Reverse Recovery Time (Note 1) Trr 35-60 nS Typical junction Capacitance (Note 2) CJ 150 pF TJ, TSTG -55 to +150 Operating Junction and Storage Temperature Range o C NOTES : (1) Reverse recovery test conditions IF = 0.5A IR = 1. 0A Irr = 0.25A. (2) Thermal Resistance junction to terminal. (3) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. Rev.07C © 2006 Thinki Semiconductor Co., Ltd. Page 1/2 http://www.thinkisemi.com/ ® MUR3020CTR thru MUR3060CTR FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 300 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 30 25 20 15 10 5 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 250 200 150 100 50 0 0 50 100 150 1 FIG.4 - TYPICAL REVERSE CHARACTERISTICS FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 150 MUR3040CTR MUR3020CTR 15 MUR3060CTR 1.0 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.1 0.2 0.4 0.6 0.8 1.0 1.2 100 NUMBER OF CYCLES AT 60Hz o LEAD TEMPERATURE, C IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 1.4 o TJ=125 C 10 1 0.1 o TJ=25 C 0.01 1.6 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 1000 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS . Rev.07C © 2006 Thinki Semiconductor Co., Ltd. . . Page 2/2 http://www.thinkisemi.com/