130V Series Resettable Fuse PTC Features Radial leaded devices. Over-current protection High voltage surge capabilities Flame retardant epoxy polymer insulating material meets UL94 V-0 requirement. Available in lead-free version. Meets MSL level 1, per J-STD-020 Dimensions(Unit:mm) Fast Delivery Time 1 HUAAN LIMITED www.huaandz.com 130V Series Electrical characteristics(25℃) Maximum Time Resistance To Trip Ihold Itrip Vmax Imax Typ Current Time Rmin Rmax R1max Part Number (mA) (mA) V (A) (W) (A) (S) (Ω) (Ω) (Ω) JK130010 100 200 130 10.0 0.8 0.5 6 2.5 9.0 20 JK130015 150 300 130 10.0 0.8 0.75 5.5 2.50 7.50 18 JK130017 170 340 130 10.0 0.8 0.85 5.2 1.50 7.00 16 JK130020 200 400 130 10.0 0.8 1 5.0 1.9 4.0 12 JK130025 250 500 130 10.0 1.0 1.25 4.8 1.45 3.50 10 JK130030 300 600 130 10.0 1.0 1.5 4.5 1.0 3.0 5.0 JK130040 400 800 130 10.0 1.0 2.0 4.5 0.75 2.0 4.0 JK130050 500 1000 130 10.0 1.0 2.5 5.0 0.50 1.60 3.5 JK130065 650 1300 130 10.0 1.0 3.25 5.2 0.45 1.0 2.0 JK130075 750 1500 130 10.0 1.0 3.75 5.5 0.40 0.90 2.0 JK130090 900 1800 130 10.0 1.5 4.5 5.8 0.30 0.70 1.5 JK130110 1100 2200 130 10.0 1.5 5.5 6.3 0.20 0.65 1.20 JK130135 1350 2700 130 10.0 1.8 6.75 7.5 0.15 0.60 1.1 JK130160 1600 3200 130 10.0 1.8 8.0 8 0.10 0.50 1.0 JK130185 1850 3700 130 10.0 2.0 9.25 9 0.10 0.40 0.80 JK130200 2000 4000 130 10.0 2.0 10.0 10 0.10 0.30 0.50 Pd ·IH = Hold current: maximum current device will pass without tripping in 25℃ still air. ·IT = Trip current: minimum current at which the device will trip in 25℃ still air. ·VMAXi = Maximum interrupt voltage device can withstand without damage at rated current. ·IMAX = Maximum fault current device can withstand without damage at rated voltage. ·RMAX = Maximum resistance of device in initial (un-soldered) state. ·RMIN = Minimum resistance of device in initial (un-soldered) state Operating temperature: -40℃ ~+85℃ Packing quantity:1000PCS [email protected] Specifications are subject to change without notice 2 HUAAN LIMITED www.huaandz.com Tel:+86-755-27465585