ISX06 Series DC-DC Converter 6 Watt xxx Series • Regulated Single & Dual Output • Wide 4:1 Input Range • Compact SMD Package • 1500 VDC Isolation • Operating Temperature -40 °C to +100 °C • Remote On/Off • Tape & Reel Package Available • Optional Water Washable Versions • 3 Year Warranty Dimensions: ISX06: 1.0 x 0.87 x 0.4” (25.4 x 22.0 x 10.2 mm) Models & Ratings Input Voltage Output Voltage 9-36 V 18-75 V Output Current Min Max Input Current(1,2) No Load Full Load Maximum Capacitive Load(3) Efficiency Model Number(4) 3.3 V 218 mA 1450 mA 30 mA 262 mA 330 µF 76% ISX0624S3V3 5.0 V 180 mA 1200 mA 30 mA 316 mA 330 µF 79% ISX0624S05 12.0 V 75 mA 500 mA 30 mA 300 mA 100 µF 83% ISX0624S12 15.0 V 60 mA 400 mA 30 mA 300 mA 100 µF 83% ISX0624S15 24.0 V 38 mA 250 mA 30 mA 300 mA 100 µF 83% ISX0624S24 ±5.0 V ±90 mA ±600 mA 30 mA 300 mA ±100 µF 82% ISX0624D05 ±12.0 V ±38 mA ±250 mA 30 mA 300 mA ±100 µF 83% ISX0624D12 ±15.0 V ±30 mA ±200 mA 30 mA 300 mA ±100 µF 83% ISX0624D15 3.3 V 218 mA 1450 mA 20 mA 130 mA 330 µF 76% ISX0648S3V3 5.0 V 180 mA 1200 mA 20 mA 160 mA 330 µF 79% ISX0648S05 12.0 V 75 mA 500 mA 20 mA 150 mA 100 µF 83% ISX0648S12 15.0 V 60 mA 400 mA 20 mA 150 mA 100 µF 83% ISX0648S15 24.0 V 38 mA 250 mA 20 mA 150 mA 100 µF 83% ISX0648S24 ±5.0 V ±90 mA ±600 mA 20 mA 150 mA ±100 µF 82% ISX0648D05 ±12.0 V ±38 mA ±250 mA 20 mA 150 mA ±100 µF 83% ISX0648D12 ±15.0 V ±30 mA ±200 mA 20 mA 150 mA ±100 µF 83% ISX0648D15 Notes 1. Input currents measured at nominal input voltage. 2. Input current is typically 10 mA at nominal input voltage when output is remotely turned off. 3. Maximum capacitive load is per output. 4. For optional water washable version, add suffix ‘-P’ e.g. ISX0624S12-P. Mechanical Details 0.87 (22.0) 16 0.2 (5.08) 11 9 Top View 1 2 0.1 (2.54) 1 6 1.0 (25.4) 0.8 (20.3) 0.70 (17.78) 0.20 (5.08) 0 0.4 (10.05) 0.01 (0.15) 8 0.06 (1.5) ±0.4 ±0.02 (10.2 ±0.5) www.xppower.com S Seating Plane 1.06 (26.8) 0.93 (23.55) 0.80 (20.3) 0~ 4 0.5 (12.7) 0.08 (2.11) 0.1 S 0.10 (2.54) 0.07 (1.7) 0.13 (3.25) ISX06 Series DC-DC Converter Input Characteristic Input Voltage Range Input Filter Minimum Typical Units 36 VDC 24 V nominal 18 75 VDC 48 V nominal 50 VDC for 1 s 24 V models 100 VDC for 1 s 48 V models Pi type Input Reflected Ripple 20 Input Surge Undervoltage Lockout Remote On/Off Notes & Conditions Maximum 9 mA pk-pk Through 12 µH inductor and 47 µF capacitor ON at >4.5 V, OFF at <8 V 24 V models ON at >8.5 V, OFF at <17 V 48 V models ON: Logic high (2.5 - 50 V) or open circuit OFF: Logic low (<0.8 V) or short pin 1 to pin 2 Output Characteristic Minimum Output Voltage 3.3 Typical Initial Set Accuracy ±1.0 Output Voltage Balance ±1.0 Maximum Units Notes & Conditions 30 VDC See Models and Ratings table ±2.0 % Minimum Load % For dual output with balanced laods A See Models and Ratings table Line Regulation ±0.5 ±1.0 % Load Regulation ±0.5 ±1.2 % 15% to 100% load % On dual output models when one load is varied between 25% and 100% and other is fixed at 100% Cross Regulation ±5 Transient Response 3 Ripple & Noise Overload Protection % deviation 100 110 150 mV pk-pk % Recovery within 1% in less than 600 µs for a 25% load change. 20 MHz bandwidth. Measured using 0.47 µF ceramic capacitor. Foldback Short Circuit Protection Continuous, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ ˚C Maximum Units General Characteristic Minimum Efficiency Isolation: Input to Output Isolation Resistance Typical 80 Switching Frequency 330 Power Density Mean Time Between Failure Weight See Models and Ratings table 60 s/1 s pF kHz At 500 VDC 1500 17.2 W/in3 109 1200 Notes & Conditions VDC 1500/1800 Isolation Capacitance Moisture Sensitivity Level % Ω 350 kHrs 0.017 (7.8) lb (g) Level 2 At 1 V, 100 kHz MIL-HDBK-217F, +25 °C GB IPC/JEDEC J-STD-020D.1 Environmental Characteristic Minimum Operating Temperature -40 Storage Temperature -50 Case Temperature Humidity Typical Maximum Units Notes & Conditions +100 °C See Derating Curve. +125 °C +105 °C 95 %RH Cooling Case Flammability Non-condensing Natural convection UL 94V-0 Rated Non conductive black plastic Lead-Free Reflow Solder Process IPC/JEDEC J-STD-020D.1 www.xppower.com 2 ISX06 Series DC-DC Converter Safety Approvals Safety Agency Safety Standard Notes & Conditions CB IEC60950-1 ITE UL UL/cUL60950-1 ITE EMC: Emissions Phenomenon Standard Test Level Conducted EN55022 Class A Notes & Conditions Mechanical Details Connecting Pin Pattern 0.70 (17.78) 0.87 (22.0) 0.5 (12.7) 0.08 (2.11) 11 16 0.20 (5.08) 0.2 (5.08) 9 Top View 1 2 6 1.0 (25.4) 1.06 (26.8) 0.93 (23.55) 0.8 (20.3) 0.80 (20.3) 8 0.1 (2.54) 0.10 (2.54) 0.06 (1.5) 0.4 (10.05) Seating Plane 0~ 4 S 0.01 (0.15) 0.1 S ±0.4 ±0.02 (10.2 ±0.5) Application Notes Derating Curve 0.07 (1.7) 0.13 (3.25) Pin Connections Pin 1 2 6 8 9 11 16 Single Remote On/Off -Vin No Connection No Connection +Vout -Vout +Vin Dual Remote On/Off -Vin Common -Vout +Vout Common +Vin Output Power (%) 100 0 -40 60 100 Ambient Temperature (°C) Notes 1. All dimensions are in inches (mm) 2. Weight: 0.017 lbs (7.8 g) approx. 3 3. Tolerance: X.XX±0.01 (X.X±0.25) X.XXX±0.005 (X.XX±0.13) 4. Pin Tolerance: ±0.002 (±0.05) www.xppower.com 22 Dec 15