ASD05H I sol at e d a n d R e gul at ed 5 WATT Open Fr a me DC/DC Co n ve rte r series Wide 4:1 Input Range 9 to 36V or 18 to 75V Available High Efficiency Regulated Outputs 1500VDC Isolation Integral Finned Heatsink EN60950-1 & UL60950-1 Approved Unit measures 1”W x 2”L x 0.41”H Model Number Output Voltage Output Amps Input Range SINGLE OUTPUT ASD05H-12S3 3.3 VDC ASD05H-48S3 ASD05H-12S5 5 VDC ASD05H-48S5 ASD05H-12S9 9 VDC ASD05H-48S9 ASD05H-12S12 12 VDC ASD05H-48S12 ASD05H-12S15 15 VDC ASD05H-48S15 1.5 1.5 1 1 0.55 0.55 0.42 0.42 0.33 0.33 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC DUAL OUTPUT ASD05H-12D5 ±5 VDC ASD05H-48D5 ASD05H-12D12 ±12 VDC ASD05H-48D12 ASD05H-12D15 ±15 VDC ASD05H-48D15 ±0.5 ±0.5 ±0.21 ±0.21 ±0.17 ±0.17 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 I sol at e d a n d R e gul at ed 5 WATT Open Fr a me DC/DC Co n ve rte r INPUT SPECIFICATIONS Input Voltage, Nominal Input Voltage Ranges Input Surge Voltage series GENERAL SPECIFICATIONS 12VDC 9-36 50V (12V Models), * 100V (48V Models), * 10 mS duration, min. 48VDC 18-75 VDC OUTPUT SPECIFICATIONS Voltage and Current Preset Accuracy Cross Regulation (Duals) Load Regulation 20% - FL Line Regulation Minimum Load Ripple/Noise (Pk-Pk, typ) Single 3.3V Single 5V Single 9,12 Single15V Dual 5V Dual 12, 15V Overvoltage Protection Short Circuit Protection ASD05H See Selection Chart Single: +/- 3% max. Duals: +/- 4% max. 5-8% typ. single: +/- 0.5% duals: +/-1%, +/-3% (5V mod) single: +/- 0.5% duals: +/- 1% 5% of Full Load (Note 1) 150mV 100mV (12Vin), 150mV (48Vin) 50mV (12Vin), 100mV (48Vin) 50mV 150mV 50mV Clamp, 130-150% * Clamp, need to release load On/Off Control Shutdown Idle Current Input-Out Isolation In/Out Capacitance Efficiency at nom. Input (Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF 15mA 1500VDC (48V) 500 VDC (12V) 1000 pF 12V: 72%-83%, typ. 48V: 69%-80%, typ. ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Relative Humidity Storage Temperature Maximum Heatsink Temp MTBF Shock/Vibration Safety UL/cUL: UL-EU: -25 to +71°C(FL) 0 to 95%, non-cond -40 to +125°C * 110°C * 1,000,000 Hrs Mil Std 217, 25°C To MIL-STD 810°C UL60950-1 2nd ed./ CAN/CSA C22.2 60950-1 2nd ed. EN60950-1 2nd ed. PHYSICAL SPECIFICATIONS Heatsink Material Construction Weight Aluminum Open Frame 0.57 oz, (16g) All specifications are typical at nominal input, full load, and 25°C unless otherwise noted NOTES * These are stress ratings. Exposure of the devices to any of these conditions 1. Ripple & Noise is measured by using a 20MHz bandwidth oscilloscope and terminating the output with a 47uF electrolytic capacitor paralleled with a 0.1uF ceramic capacitor. may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASD05H I sol at e d a n d R e gul at ed 5 WATT Open Fr a me DC/DC Co n ve rte r series MECHANICAL DIMENSIONS .41in 10.52mm max Pin# Single Outputs Dual Outputs .24in 6.0mm min 3 1.00in 25.4mm .60in 15.24mm .40in 10.16mm 1 2 4 6 5 .50in 12.7mm .60in 15.24mm 1.40in 35.56mm 2.00in 50.8mm .10in 2.54mm .90in 22.86mm 1 + Input + Input 2 - Input - Input 3 4 5 + Output N/A - Output + Output Common - Output 6 Control Control .10in 2.54mm TOLERANCES : .XX 0.5mm(0.02in) : .XXX 0.25mm(0.01in) 0H_B DESCRIPTION DATE Change height from 9.52 to 10.52mm OUTPUT DERATING CURVE 2012/10/29 DIMENSION X<8 8<X<25 25<X<100 100<X<300 300<X<800 120 Output Power (%) 100 UNIT SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) SIZE ANGULAR SCALE PIERCING ±0.1 ±0.1 BENDING ±0.15 ±0.2 ±0.15 ±0.2 ±0.25 ±0.3 ±1° CHECKED ±0.3 ±0.5 ±1.5° APPROVED SHEET ±0.3° ±0.5° Projection ±0.5° DRAWN mm A4 MATERIAL OF MODEL NO. 1:1 PART NO. TITLE ASD10H 2D outline drawings Erica 80 60 40 20 0 0 10 20 30 40 50 Ambient Temp °C WWW.ASTRODYNETDI.COM 60 70 80 90 2915 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458