Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current Data Sheet 1 EMIFILr (Capacitor type) Single Circuit Type for Large Current NFM41P Series (1806 Size) c Dimensions 1.5±0.3 Insertion Loss (dB) 20 0.7 min. 4.5±0.3 (3) 1.6±0.3 (2) (1) (50Ω - 50Ω) 0 1.6±0.3 1.0±0.2 0.4±0.3 c Insertion Loss Characteristics (Main Items) 40 60 80 NFM41PC204F1H3 0.3+0.3 –0.2 (2) NFM41PC155B1E3 100 : Electrode 1 10 (in mm) c Equivalent Circuit 100 Frequency (MHz) 1000 3000 c Packaging Input (Output) (1) Code Packaging Minimum Quantity L 180mm Embossed Tape 4000 B Bulk(Bag) 500 Output (Input) (3) No polarity. GND (2) c Rated Value (p: packaging code) Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM41PC204F1H3p 0.2µF 80/-20% 2A 50Vdc 1000M ohm -55 to +85°C NFM41PC155B1E3p 1.5µF ±20% 6A 25Vdc 300M ohm -55 to +85°C Part Number Number of Circuit: 1 c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2011.11.2 http://www.murata.com/