Datasheet 40 Gbps QSFP Media Converter EM316-2QSFP-40G Highlights Multiple functions in one module: --40G converter/repeater --Quad 10G optical multiplexer 40G link interface --Ethernet/IEEE: 802.3ba 40GE-LR4 40G multi-link (fiber) interfaces --Ethernet/IEEE: 802.3ba XLAUI --OIF: CEI-11G Overview The Fiber Driver® EM316-2QSFP-40G media module provides media conversion and distance extension for 40G or 10G Ethernet links. The module addresses the growing need for more bandwidth for data centers and enterprises. The emergence of high-end servers and Ethernet switches with 40G Ethernet interfaces increases the need for media conversion (multi-mode to single-mode) and link range extension. The compact, hot-swappable one-slot module has two QSFP sockets for modular QSFP transceivers. Installation and setup is simple plug-n-play. Insert the module into any powered Fiber Driver chassis with the QSFP transceivers required for the application, and then connect to the network. Changing a connection type at any time is simple, requiring only replacement of a hot-swappable QSFP transceiver. The module ports support the MSA standard including Digital Diagnostics. Because the transceivers meet industry standards, a smaller inventory shared between applications reduces expenses and maximizes the return on investment. MRV offers multiple QSFP pluggable transceivers: QSFP-40GD-SX - 40 Gig QSFP Multi-mode 100 Meter QSFP-40GD-LR4 - 40 Gig QSFP Single-mode 10 km The multi-mode QSFP may be used with MPO MM (40G) or with fan-out cables for quad 10G interfaces. The 40G Ethernet 802.3ba standard adopts a Wavelength Division Multiplexing (WDM) approach for single mode. The 802.3ba standard divides the 40G Ethernet signal into four 10 Gigabit Ethernet signals. 1 10G interfaces --8.5 - 11.3 Gbps QSFP ports for flexibility and scalability --Add or change optics to adjust data rates --Single item module inventory Link Integrity Notification (LIN) Loopback Management through EM316LNXNM-OT --Command line interface (CLI) --SNMP management --Full graphical management with MegaVision Pro® --Port feature control --Digital Diagnostics Pseudo Random Bit Sequence (PRBS) sender/ checker for connection testing (per 10G interface) Hot-swap support (module and interfaces) Fiber Driver chassis compatibility Datasheet Operational Modes Depending on the installed QSFP, the EM316-2QSFP-40G serves two primary applications: 1. 40G Converter/Repeater (Application 1) In this mode, each interface carries a 40G Ethernet signal. The module acts as a MM-to-SM converter or as a repeater for MM-to-MM or SM-to-SM. SM 40GBASE FP Q 4 LR QS Application 1: 40G Mode Management 40G Re p 2-Slot Fiber Driver Chassis eater per M Coax PM SF 802. 3ba 2. 10G 4-Channel Multiplexer (Application 2) In this application, the module multiplexes four 10G interfaces over a dual-strand single-mode optical link. The EM316-2QSFP-40G provides full 3R signal recovery and embedded electronic dispersion compensation, assuring a link reach of 15-20 km with qualified fiber installation. SM 40GBASE FP Management 4 LR QS Application 2: 4 x 10G Mode 4x 10G CWD M QSFP to Quad SFP+ MM/SM Aggregate d Link QSFP to Quad SFP+ MM/SM The EM316-2QSFP-40G also offers advanced module loopback and PRBS capabilities on each 10G interface. Loopback simplifies validation of the installation, debugging the optical link, and finding potential faults on either the client or line interface. PRBS provides additional circuit testing. 2 Datasheet Management The EM316LNXNM-OT management module provides Fiber Driver® network administration through a command line, SNMP, and MegaVision Pro®, the MRV Communications graphical network management system. The EM316LNXNM-OT monitors QSFP port status, manages module configuration, and provides vendor information. Physical Specifications Operating Temperature Range* 00C to 500C (320F to 1220F) Storage Temperature -400C to 700C (-400F to 1580F) Relative Humidity 85% maximum, non-condensing Physical Dimensions 75 mm x 25 mm x 175 mm deep (3” x 1” x 7” deep) Weight Approximately 213 g (7.5 oz) Regulatory Compliance FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS 2 Directive; China RoHS; WEEE Directive * Operating Range listed is for the module only. Operating Range of pluggable interface(s) used may differ. Ordering Information Model Function Protocol Connectors Port/Link EM316-2QSFP-40G 40G converter/repeater, Quad 10G Optical Multiplexer module with QSFP Interfaces Ethernet/IEEE: 802.3ba 40GE-LR4, Ethernet/IEEE: 802.3ba XLAUI, OIF: CEI-11G QSFP (x2) Wavelength Budget (dB) Distance Range QSFP Dependent For more information on Fiber Driver product line and other MRV products, visit http://www.mrv.com or send an email to MRV sales at [email protected]. MRV operates Worldwide sales and service offices across four continents. Contact us at [email protected] MRV Communications Corporate Headquarters 300 Apollo Drive Chelmsford, MA 01824 http://www.mrv.com All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-FD-2QSFP40G-021213 3020175-001 Rev. A2 Copyright ©2013 MRV Communications, Inc. All Rights Reserved.