PC PSU FSP450-50ERN DESCRIPTION This specification describes a 450 watts power supply. With 5 output, and remote ON/OFF control for ATX-12V system and a “Power factor correction (active PFC )” circuit at 100V-240Vac. APPLICATION Desktop W ATTAGE Wattage: 450W DIMENSION Dimension: 140mm(L) x 150mm(W) x 86mm(H) SAFETY STANDARD APPAOVAL 80PLUS Silver <0.5W 100~240Vac GENERAL SPECIFICATION PRODUCT HIGHLIGHT Efficiency Level: Erp Lot: Input Voltage: INPUT SPECIFICATION Input Range: Input Frequency: Input Current: 100-240 Vac 47-63 Hz 7Amp (maximum) at 100127Vrms/ 60 Hz 3.5Amp (maximum) at 200-240 Vrms/ 50 Hz. ENVIRONMENTAL SPECIFICATION TEMP.Range: MTBF: OUTPUT SPECIFICATION Output Rise Time: Efficiency: 80PLUS Silver PWOK Delay Time: 500ms > PWOK > 100ms EMC Performance: EN55022 class B EN55024 EN 61000-3-2 EN 61000-3-3 +3.3V 20mS (maximum) +5V 20mS (max +12 V 20mS (maximum) -12 V 20mS (maximum) *Output Voltage and C urrent Rating +3.3V Ripple-Noise(R-P) mV 50mV Regulation Load % ±5% Output Max.(A) 24A Output Min.(A) 0.2A +5V 50mV ±5% 15A 1A +12V1 5mV ±5% 36A 0.05A NOTES +3.3V & +5V total output not exceed 120W. When +5V is load to 15A, the +3.3V maximum load is 13.63A. When +3.3V is load to 24A, the +5V maximum load is 8A. This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice Storage Temperature: -40°C to + 70℃ The power supply reliability, when calculated by “Bellcore” latest revision are exceed 100,000 hours with all output at maximum load and an ambient temperature of 25℃. -12V 200mV ±10% 0.3A 0A +5Vsb 50mV ±5% 3A 0A