Panasonic ET-DLE085 Dlp projector Datasheet

S
Product Number :
Product Name :
P
E
C
F
I
L
E
PT-RW930B/RW930W
PT-RW930LB/RW930LW
DLP™ Projectors
As of July 2016. Specifications and appearance are subject to change without notice.
SFD16M035
1/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
Specifications
Main unit
Power supply
Power consumption
BTU value
LCDpanel
Lens
AC100 - 240V 10.4-5.0A 50Hz/60Hz
1,050W
NORMAL: 742W ECO: 617W LONG LIFE1: 410-588
LONG LIFE 2: 375-588W LONG LIFE 3: 349-588W SHUTTER: 82W
STANDBY MODE [ECO]*1: 0.2W STANDBY MODE [NORMAL]: 3W
STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft),
ICE62087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic Contrast2
Max 3,584 BTU
Panel size
16.5 mm (0.65 in) diagonal (16:10 aspect ratio)
Display method
DLP™ chip × 1, DLP™ system
Pixels
1,024,000 (1280 × 800) × 1, total of 1,024,000 pixels
PT-RW930B/W
Powered zoom/focus lenses (1.7–2.4:1), F 1.7–1.9, f 25.6–35.7 mm
PT-RW930LB/LW
Optional powered zoom/focus lenses and fixed-focus lens
Light source
Laser Diode Laser class 1(Class3R for US models)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 30°C (86°F), Altitude 700m (2,297 ft), Dust: 0.15mg/m3
Dynamic Contrast3
43,800 hours at constant luminance (LONG LIFE1)
61,320 hours at constant luminance (LONG LIFE2)
87,600 hours at constant luminance (LONG LIFE3)
Screen size
1.27– 15.24 m (50 – 600 inches) (16:10 aspect ratio)
*1.27 – 5.08 m (50 – 200 inches) with the ET-DLE055 (16:10 aspect ratio)
*2.54 – 7.62 m (100 – 350 inches) with the ET-DLE030 (16:10 aspect ratio)
10,000 lumens (Center)*2/ 9,400 lumens*3
Brightness*3
Center-to-corner uniformity*3
Contrast*3
Resolution
Scanning frequency
HDMI/DVI-D
RGB
As of July 2016
SFD16M035
9,400 lumens (Half luminance) (NORMAL)
7,500 lumens (Half luminance) (ECO)
3,700 lumens (Constant luminance) (LONG LIFE1)
3,100 lumens (Constant luminance) (LONG LIFE2)
2,500 lumens (Constant luminance) (LONG LIFE3)
90%
10,000:1 (All White/All Black) (Dynamic Contrast3)
1280 × 800 pixels (Input signals that exceed this resolution will be
converted to 1280 x 800 pixels.)
fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz
525i (480i)*4, 625i (576i)*4, 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p,
1125 (1080)/50p, VGA (640 x 480) - WUXGA (1920 x 1200) compatible
with non-interlaced signals only
fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 20 - 162 MHz
2/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
Scanning frequency
YPBPR (YCBCR)
525i (480i):
fH 15.73 kHz; fV 59.9 Hz,
625i (576i):
fH 15.63 kHz; fV 59.9 Hz,
525p (480p):
fH 31.50 kHz; fV 60 Hz,
625p (576p):
fH 31.25 kHz; fV 50 Hz,
750 (720)/60p:
fH 45.00 kHz; fV 60 Hz,
750 (720)/50p:
fH 37.50 kHz; fV 50 Hz,
1125 (1080)/60i:
fH 33.75 kHz; fV 60 Hz,
1125 (1080)/50i:
fH 28.13 kHz; fV 50 Hz,
1125 (1080)/25p:
fH 28.13 kHz; fV 25 Hz,
1125 (1080)/24p:
fH 27.00 kHz; fV 24 Hz,
1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz,
1125 (1080)/30p:
fH 33.75 kHz; fV 30 Hz,
1125 (1080)/60p:
fH 67.50 kHz; fV 60 Hz,
1125 (1080)/50p:
fH 56.25 kHz; fV 50 Hz
fH: 15.73 kHz, fV: 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Video/S-Video
Geometry correction range
Only [KEYSTONE] used
Projection
lens Model
No.
Supplied lens/
ET-DLE170
ET-DLE030*
ET-DLE055
ET-DLE085
ET-DLE150
ET-DLE250
ET-DLE350
ET-DLE450
[KEYSTONE] and [CURVED] used together
Only [CURVED] used
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Min. value
of R2/L2
Min. value
of R3/L3
Min. value
of R2/L2
Min. value
of R3/L3
±40
±15
±20
±15
0.9
1.7
0.5
1
+5/-0
±22
±22
±40
±40
±40
±40
0
±15
±15
±15
±15
±15
±15
―
±8
±8
±20
±20
±20
±20
―
±8
±8
±15
±15
±15
±15
―
1.7
1.7
1.1
0.7
0.4
0.3
―
4.3
4.3
2.6
1.3
0.8
0.6
―
1
1
0.6
0.4
0.3
0.2
―
2.6
2.6
1.5
0.7
0.5
0.3
* Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves
away from the screen.
[VERTICAL KEYSTONE] (viewed from the side)
[HORIZONTAL KEYSTONE] (viewed from above)
Screen
Screen
Vertical arc correction (viewed from the side)
Horizontal arc correction (viewed from above)
Projection distance
Arc radius
Screen
Projection distance
Arc radius
Screen
Arc center
Arc center
Screen
Screen
Projection distance
Arc radius
Projection distance
Arc radius
• When [GEOMETRY] is used, the focus of the entire screen may be lost as correction increases.
• Make the curved screen a circular arc shape with one part of a perfect circle removed.
• Adjustment range of the [GEOMETRY] items may not match the listed projection range depending
on the projection lens. Use this projector within the projection range, otherwise the correction may
not work.
As of July 2016
SFD16M035
3/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
Optical axis shift
Vertical: +60%, -16%(powered),
Horizontal: +30%, -10%(When using the ET-DLE085, +28%, -10％) (powered)
NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055.
If using the ET-DLE030, the optical axis is fixed.
Installation
Terminals
Ceiling/floor, front/rear, 360 degree free installation
HDMI IN
HDMI 19-pin × 1, Deep Color, compatible with HDCP,
DVI-D IN
DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP,
for single link only
RGB 1 IN
R, G, B
BNC × 5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
Y, PB, PR (Y, CB, CR)
Y,C
Video
RGB 2 IN
R, G, B
Y, PB, PR(Y, CB, CR)
SERIAL/MULTI
PROJECTOR SYNC IN
SERIAL/MULTI
PROJECTOR SYNC OUT
As of July 2016
SFD16M035
D-sub HD 15-pin (female) × 1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
D-sub 9-pin (male) x 1 for link control
M3 jack x 1 for wired remote control
M3 jack x 1 for link control (for wired remote control)
REMOTE 2 IN
D-sub 9-pin (female) x1 for external control (parallel)
LAN/DIGITAL LINK
RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compliant with PJLink™(Class 1)
Deep Color, HDCP
PT-RW930LB/RW930LW
Operation noise
Operating temperature
Operating humidity
1.0Vp-p, 75 ohms
REMOTE 1 IN
REMOTE 1 OUT
Power cord length
Cabinet materials
Dimensions (W × H × D) PT-RW930B/RW930W
Weight
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
PT-RW930B/RW930W
PT-RW930LB/RW930LW
3.0 m (9 ft 10 in)
Molded plastic
498 x 200*5 x 581mm
(19-19/32 x 7-7/8*5 x 22-7/8in ) with supplied lens
498 x 200*5 x 538 mm
(19-19/32 x 7-7/8*5 x 21-3/16in) without lens
Approx. 23.2kg (51.1lbs) with supplied lens
Approx. 22.4kg (49.4lbs) without lens
41 dB
0 – 45 °C (32 –113 °F) * 6
10%– 80% (no condensation)
4/20
DLP™ Projector
PT-RW930B/RW930W/RW930LB/RW930LW
Remote control unit
Power supply
Operation range
Dimensions (W × H × D)
Weight*7
3 V DC (R03/AAA type battery × 2)
Approx. 30 m (98 ft 5 in) when operated from directly in front of the
signal receptor
48 × 145 × 27 mm (1-57/64 × 5-45/64 × 1-3/64 in)
Approx. 102 g (3.6 oz) including batteries
Supplied accessories
Power cord with secure lock (× 1) (× 2 for EU models)
Wireless/wired remote control unit (× 1)
Batteries for remote control (R03/AAA type × 2)
Software CD-ROM (Logo Transfer Software, Multi Monitoring
& Control Software) (× 1)
Lens Mount Cover (× 1)
Lens cover (× 1) (Only models with lens)
Optional accessories
Digital interface box
Digital LINK Switcher
Zoom lens (0.8–1.0:1)
Zoom lens (1.4 – 2.0:1)
Zoom lens (1.8 – 2.5:1)
Zoom lens (2.4 – 3.8:1)
Zoom lens (3.8 – 5.7:1)
Zoom lens (5.6 – 9.0:1)
Fixed-focus lens (0.38:1)
Fixed-focus lens (0.8:1)
Ceiling mount bracket
High-ceiling mount bracket
(6-axis adjustment mechanism)
Attachment for ceiling mount bracket
Geometry Manager Pro Upgrade kit
Auto Screen Adjustment Upgrade kit
Early Warning Software
ET-YFB100G
ET-YFB200G
ET-DLE085
ET-DLE150
ET-DLE170 (same as supplied lens)
ET-DLE250
ET-DLE350
ET-DLE450
ET-DLE030
ET-DLE055
ET-PKD120H (for high ceilings)
ET-PKD120S (for low ceilings)
ET-PKD130H
ET-PKD130B
ET-UK20
ET-CUK10
ET-SWA100*
* The symbol at the end of the part number will vary depending on the type of license.
*1
*2
*3
*4
*5
*6
*7
When the STANDBY MODE is set to Eco, network functions such as power on over the LAN will not operate.
The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by
the ISO/IEC 21118:2012 international standards.
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
with legs at shortest position.
Limits the luminance when used in locations from 0m to 2,700m (0ft to 8,858ft) above sea level at ambient temperatures of 35°C (95°F) or higher,
or from 2,700m to 4,200m (8,858ft to 13,780ft) above sea level at ambient temperatures of 25°C (77°F) or higher.
Average value. May differ depending on models.
As of July 2016
SFD16M035
5/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
269
(10-19/32)
580.8
(22-7/8)
538
(21-3/16)
269
(10-19/32)
Dimensions
19
(3/4)
221 (8-11/16)
442 (17-13/32)
4
(5/32)
200
(7-7/8)
181
(7-1/8)
96.5
(3-13/16)
28
(1-3/32)
42.8
(1-11/16)
115.5
(4-9/16)
249 (9-13/16)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
432 (17)
444 (15/32)
457 (18)
498 (19-19/32)
Terminals
1
2
3
4
5
6
As of July 2016
SFD16M035
7
8
9
10
1
REMOTE 1 INPUT
2
REMOTE 1 OUTPUT
3
REMOTE 2 INPUT
4
SERIAL/MULTI PROJECTOR SYNC INPUT
5
SERIAL/MULTI PROJECTOR SYNC OUTPUT
6
RGB 1 INPUT
7
RGB 2 INPUT
8
DVI-D INPUT
9
HDMI INPUT
10
LAN/DIGITAL LINK TERMINAL
6/20
DLP™ Projector
PT-RW930B/RW930W/RW930LB/RW930LW
ø60.5
E
Upper edge of projected image
L
463.5–543.5* 2
(18-1/4–21-13/32)
*2
352–432
(13-27/32–17)
Standard setting-up position (If using other than the ET-DLE030)
*1 When the lens protrudes to the maximum.
84 mm (3-5/16 in) with the ET-DLE085
43 mm (1-11/16 in)
with the supplied lens/ET-DLE170
44 mm (1-23/32 in) with the ET-DLE150
45 mm (1-25/32 in) with the ET-DLE250
51mm (2 in) with the ET-DLE350
95 mm (3-3/4 in) with the ET-DLE450
27 mm (1-1/16 in) with the ET-DLE055
*2 Adjustable in 40 mm (1-9/16 in) steps.
244
294
(9-19/32) (11-9/16)
E
*1
Lower edge of projected image
Projected image
370
(14-9/16)
100
(3-15/16)
unit : mm (inch)
NOTE:
100
(3-15/16)
259
(10-3/16)
Illustrations show the projector
installed using optional ceiling mount
bracket ET-PKD120H, optional bracket
assembly ET-PKD130B and an optional
lens.
This illustration is not drawn to scale.
Caution:
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling
down from the ceiling, use the supplied wire on the mounting bracket.
As of July 2016
SFD16M035
7/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
Projection distance for 16:10 aspect ratio screen (If using other than the ET-DLE030)
Unit: meters
Screen size
(diagonal)
Distance to screen (L)
Height from the edge
of screen to
Fixed-focus center of lens (H)
Zoom
ET-DLE085
Zoom lens
ET-DLE150
Zoom lens
Supplied lens/ET-DLE170
Zoom lens
ET-DLE250
Zoom lens
ET-DLE350
Zoom lens
ET-DLE450
Zoom lens
ET-DLE055
Fixed-focus
lens
Zoom
lenses
Fixedfocus
lens
[in]
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
1.27 / 50
0.87
1.09
1.45
2.12
1.91
2.70
2.54
4.06
4.00
6.11
5.96
9.59
0.87
-0.07 – 0.44 0.34
1.52 / 60
1.05
1.32
1.75
2.55
2.31
3.26
3.07
4.89
4.83
7.36
7.21
11.57
1.06
-0.08 – 0.53 0.40
1.78 / 70
1.23
1.54
2.05
2.98
2.71
3.81
3.59
5.72
5.65
8.61
8.46
13.55
1.24
-0.09 – 0.62 0.47
2.03 / 80
1.42
1.77
2.35
3.42
3.11
4.37
4.12
6.55
6.48
9.86
9.71
15.53
1.42
-0.11 – 0.71 0.54
7.38
7.31
11.11
10.96
17.51
1.61
-0.12 – 0.80 0.61
8.20
8.13
12.36
12.21
19.49
1.79
-0.14 – 0.89 0.67
[m]
2.29 / 90
1.60
2.00
2.65
3.85
3.50
4.92
4.64
2.54 / 100
1.78
2.22
2.95
4.28
3.90
5.48
5.16
3.05 / 120
2.15
2.68
3.55
5.15
4.70
6.59
6.21
9.86
9.79
14.86
14.72
23.45
2.16
-0.16 – 1.07 0.81
3.81 / 150
2.70
3.36
4.45
6.45
5.89
8.25
7.79
12.35
12.27
18.61
18.47
29.38
2.71
-0.20 – 1.33 1.01
5.08 / 200
3.61
4.49
5.95
8.61
7.88
11.03
10.41
16.49
16.40
24.85
24.73
39.28
3.63
-0.27 – 1.78 1.35
6.35 / 250
4.53
5.62
7.45
10.78
9.86
13.81
13.03
20.63
20.53
31.10
30.99
49.17
–
-0.34 – 2.22
–
7.62 / 300
5.45
6.76
8.95
12.95
11.85
16.58
15.65
24.77
24.67
37.34
37.25
59.06
–
-0.40 – 2.65
–
10.16 / 400
7.28
9.02
11.96
17.28
15.83
22.13
20.90
33.05
32.94
49.84
49.76
78.85
–
-0.54 – 3.55
–
12.70 / 500
9.11
11.29
14.96
21.61
19.80
27.68
26.14
41.34
41.20
62.33
62.28
98.64
–
-0.67 – 4.44
–
15.24 / 600
10.94
13.55
17.96
25.94
23.78
33.23
31.39
49.62
49.47
74.82
74.80 118.42
–
-0.81 – 5.33
–
Unit: feet
Screen size
(diagonal)
Distance to screen (L)
Zoom
ET-DLE085
Zoom lens
[m]
[in]
min.
ET-DLE150
Zoom lens
max.
min.
Supplied lens/ET-DLE170
Zoom lens
Fixed-focus
ET-DLE250
Zoom lens
ET-DLE350
Zoom lens
ET-DLE450
Zoom lens
ET-DLE055
Fixed-focus
lens
Height from the edge
of screen to
center of lens (H)
Zoom
lenses
Fixedfocus
lens
min.
max.
min.
max.
min.
max.
min.
max.
7.0
6.3
8.9
8.3
13.3
13.1
20.0
19.6
31.5
2.9
-0.2 – 1.5
1.1
8.4
7.6
10.7
10.1
16.0
15.8
24.1
23.7
38.0
3.5
-0.3 – 1.7
1.3
max.
1.27 / 50
2.9
3.6
4.8
1.52 / 60
3.4
4.3
5.7
1.78 / 70
4.0
5.1
6.7
9.8
8.9
12.5
11.8
18.8
18.5
28.2
27.8
44.5
4.1
-0.3 – 2.0
1.5
2.03 / 80
4.7
5.8
7.7
11.2
10.2
14.3
13.5
21.5
21.3
32.3
31.9
51.0
4.7
-0.4 – 2.3
1.8
2.29 / 90
5.2
6.6
8.7
12.6
11.5
16.1
15.2
24.2
24.0
36.5
36.0
57.4
5.3
-0.4 – 2.6
2.0
2.54 / 100
5.8
7.3
9.7
14.0
12.8
18.0
16.9
26.9
26.7
40.6
40.1
63.9
5.9
-0.4 – 2.9
2.2
3.05 / 120
7.1
8.8
11.6
16.9
15.4
21.6
20.4
32.3
32.1
48.8
48.3
76.9
7.1
-0.5 – 3.5
2.7
3.81 / 150
8.9
11.0
14.6
21.2
19.3
27.1
25.6
40.5
40.3
61.1
60.6
96.4
8.9
-0.7 – 4.4
3.3
5.08 / 200
11.8
14.7
19.5
28.2
25.9
36.2
34.2
54.1
53.8
81.5
81.1
128.9
11.9
-0.9 – 5.8
4.4
6.35 / 250
14.9
18.4
24.4
35.4
32.3
45.3
42.7
67.7
67.4
102.0
101.7
161.3
–
-1.1 – 7.3
–
7.62 / 300
17.9
22.2
29.4
42.5
38.9
54.4
51.3
81.3
80.9
122.5
122.2
193.8
–
-1.3 – 8.7
–
10.16 / 400
23.9
29.6
39.2
56.7
51.9
72.6
68.6
108.4
108.1
163.5
163.3
258.7
–
-1.8 – 11.7
–
12.70 / 500
29.9
37.0
49.1
70.9
65.0
90.8
85.8
135.6
135.2
204.5
204.3
323.6
–
-2.2 – 14.6
–
15.24 / 600
35.9
44.5
58.9
85.1
78.0
109.0
103.0
162.8
162.3
245.5
245.4
388.5
–
-2.7 – 17.5
–
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
Note: When the ET-DLE055 is mounted, the optical lens shift function cannot be used.
As of July 2016
SFD16M035
8/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
Projection distance for 16:9 aspect ratio screen (If using other than the ET-DLE030)
Unit: meters
Distance to screen (L)
Screen size
(diagonal)
Height from the edge
of screen to
Fixed-focus center of lens (H)
Zoom
ET-DLE085
Zoom lens
ET-DLE150
Zoom lens
Supplied lens/ET-DLE170
Zoom lens
ET-DLE250
Zoom lens
ET-DLE350
Zoom lens
ET-DLE450
Zoom lens
ET-DLE055
Fixed-focus
lens
Zoom
lenses
Fixedfocus
lens
[in]
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
1.27 / 50
0.89
1.12
1.49
2.18
1.97
2.78
2.62
4.18
4.11
6.29
6.13
9.87
0.90
-0.14 – 0.46 0.31
1.52 / 60
1.08
1.35
1.80
2.62
2.38
3.35
3.15
5.03
4.96
7.57
7.42
11.90
1.09
-0.16 – 0.55 0.37
[m]
1.78 / 70
1.27
1.59
2.11
3.07
2.79
3.92
3.69
5.88
5.81
8.85
8.70
13.94
1.27
-0.19 – 0.64 0.44
2.03 / 80
1.46
1.82
2.42
3.51
3.19
4.49
4.23
6.73
6.66
10.14
9.99
15.97
1.46
-0.22 – 0.73 0.50
2.29 / 90
1.65
2.05
2.72
3.96
3.60
5.06
4.77
7.58
7.51
11.42
11.28
18.00
1.65
-0.25 – 0.82 0.56
2.54 / 100
1.83
2.29
3.03
4.40
4.01
5.63
5.31
8.43
8.36
12.71
12.56
20.04
1.84
-0.27 – 0.91 0.62
3.05 / 120
2.21
2.75
3.65
5.29
4.83
6.77
6.39
10.14
10.06
15.27
15.14
24.11
2.22
-0.33 – 1.10 0.75
3.81 / 150
2.78
3.45
4.58
6.63
6.05
8.49
8.01
12.69
12.61
19.13
18.99
30.21
2.79
-0.41 – 1.37 0.93
5.08 / 200
3.72
4.61
6.12
8.86
8.10
11.34
10.70
16.95
16.86
25.55
25.43
40.38
3.73
-0.55 – 1.83 1.25
6.35 / 250
4.66
5.78
7.66
11.08
10.14
14.19
13.40
21.21
21.11
31.97
31.86
50.54
–
-0.69 – 2.28
–
7.62 / 300
5.60
6.94
9.21
13.31
12.18
17.04
16.09
25.46
25.36
38.39
38.29
60.71
–
-0.82 – 2.74
–
10.16 / 400
7.48
9.27
12.29
17.76
16.27
22.75
21.48
33.98
33.86
51.23
51.16
81.05
–
-1.10 – 3.65
–
12.70 / 500
9.36
11.60
15.38
22.21
20.35
28.45
26.87
42.49
42.35
64.07
64.02 101.39
–
-1.37 – 4.57
–
15.24 / 600
11.24
13.93
18.46
26.66
24.44
34.16
32.26
51.00
50.85
76.91
76.88 121.73
–
-1.64 – 5.48
–
Unit: feet
Screen size
(diagonal)
Height from the edge
of screen to
Fixed-focus center of lens (H)
Distance to screen (L)
Zoom
ET-DLE085
Zoom lens
ET-DLE150
Zoom lens
Supplied lens/ET-DLE170
Zoom lens
ET-DLE350
Zoom lens
ET-DLE450
Zoom lens
min.
max.
min.
max.
min.
max.
ET-DLE055
Fixed-focus
lens
Zoom
lenses
Fixedfocus
lens
[in]
min.
max.
min.
max.
min.
1.27 / 50
2.9
3.7
4.9
7.2
6.5
9.1
8.6
13.7
13.5
20.6
20.1
32.4
3.0
-0.4 – 1.5
1.0
1.52 / 60
3.5
4.4
5.9
8.6
7.8
11.0
10.3
16.5
16.3
24.8
24.3
39.0
3.6
-0.5 – 1.8
1.2
1.78 / 70
4.2
5.2
6.9
10.1
9.2
12.9
12.1
19.3
19.1
29.0
28.5
45.7
4.2
-0.6 – 2.1
1.4
2.03 / 80
4.8
6.0
7.9
11.5
10.5
14.7
13.9
22.1
21.9
33.3
32.8
52.4
4.8
-0.7 – 2.4
1.6
2.29 / 90
5.4
6.7
8.9
13.0
11.8
16.6
15.6
24.9
24.6
37.5
37.0
59.1
5.4
-0.8 – 2.7
1.8
2.54 / 100
6.0
7.5
9.9
14.4
13.2
18.5
17.4
27.7
27.4
41.7
41.2
65.7
6.0
-0.9 – 3.0
2.0
3.05 / 120
7.3
9.0
12.0
17.4
15.8
22.2
21.0
33.3
33.0
50.1
49.7
79.1
7.3
-1.1 – 3.6
2.5
[m]
max.
ET-DLE250
Zoom lens
3.81 / 150
9.1
11.3
15.0
21.8
19.8
27.9
26.3
41.6
41.4
62.8
62.3
99.1
9.2
-1.3 – 4.5
3.1
5.08 / 200
12.2
15.1
20.1
29.1
26.6
37.2
35.1
55.6
55.3
83.8
83.4
132.5
12.2
-1.8 – 6.0
4.1
6.35 / 250
15.3
19.0
25.1
36.4
33.3
46.6
44.0
69.6
69.3
104.9
104.5
165.8
–
-2.2 – 7.5
–
7.62 / 300
18.4
22.8
30.2
43.7
40.0
55.9
52.8
83.5
83.2
126.0
125.6
199.2
–
-2.7 – 9.0
–
10.16 / 400
24.5
30.4
40.3
58.3
53.4
74.6
70.5
111.5
111.1
168.1
167.8
265.9
–
-3.6 – 12.0
–
12.70 / 500
30.7
38.1
50.5
72.9
66.8
93.3
88.2
139.4
138.9
210.2
210.0
332.6
–
-4.5 – 15.0
–
15.24 / 600
36.9
45.7
60.6
87.5
80.2
112.1
105.8
167.3
166.8
252.3
252.2
399.4
–
-5.4 – 18.0
–
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
Note: When the ET-DLE055 is mounted, the optical lens shift function cannot be used.
As of July 2016
SFD16M035
9/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
Projection distance for 4:3 aspect ratio screen (If using other than the ET-DLE030)
Unit: meters
Distance to screen (L)
Screen size
(diagonal)
Height from the edge
of screen to
Fixed-focus center of lens (H)
Zoom
ET-DLE085
Zoom lens
ET-DLE150
Zoom lens
Supplied lens/ET-DLE170
Zoom lens
ET-DLE250
Zoom lens
ET-DLE350
Zoom lens
ET-DLE450
Zoom lens
ET-DLE055
Fixed-focus
lens
Fixedfocus
lens
Zoom
lenses
[in]
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
1.27 / 50
0.99
1.24
1.65
2.40
2.18
3.07
2.89
4.61
4.54
6.94
6.78
10.90
0.99
-0.08 – 0.50 0.38
1.52 / 60
1.20
1.50
1.99
2.89
2.63
3.70
3.48
5.55
5.48
8.35
8.20
13.14
1.20
-0.09 – 0.60 0.46
1.78 / 70
1.40
1.75
2.33
3.38
3.08
4.33
4.08
6.48
6.42
9.76
9.61
15.38
1.41
-0.11 – 0.70 0.53
2.03 / 80
1.61
2.01
2.67
3.87
3.53
4.95
4.67
7.42
7.35
11.18
11.03
17.62
1.62
-0.12 – 0.81 0.61
2.29 / 90
1.82
2.26
3.00
4.36
3.98
5.58
5.26
8.36
8.29
12.59
12.45
19.86
1.82
-0.14 – 0.91 0.69
2.54 / 100
2.03
2.52
3.34
4.85
4.42
6.21
5.86
9.30
9.22
14.01
13.87
22.10
2.03
-0.15 – 1.01 0.76
3.05 / 120
2.44
3.03
4.02
5.83
5.32
7.47
7.04
11.17
11.09
16.83
16.70
26.58
2.45
-0.18 – 1.21 0.91
3.81 / 150
3.06
3.80
5.04
7.31
6.67
9.35
8.82
13.98
13.90
21.08
20.95
33.30
3.07
-0.23 – 1.51 1.14
5.08 / 200
4.10
5.09
6.74
9.76
8.92
12.49
11.79
18.67
18.58
28.15
28.03
44.49
4.11
-0.31 – 2.01 1.52
6.35 / 250
5.13
6.37
8.44
12.21
11.17
15.64
14.76
23.36
23.26
35.22
35.12
55.69
–
-0.38 – 2.52
–
7.62 / 300
6.17
7.65
10.14
14.66
13.42
18.78
17.73
28.05
27.94
42.29
42.20
66.89
–
-0.46 – 3.02
–
10.16 / 400
8.24
10.22
13.54
19.56
17.92
25.06
23.67
37.42
37.30
56.43
56.37
89.29
–
-0.61 – 4.02
–
12.70 / 500
10.31
12.78
16.94
24.47
22.42
31.34
29.60
46.80
46.65
70.57
70.53 111.68
–
-0.76 – 5.03
–
15.24 / 600
12.39
15.35
20.34
29.37
26.92
37.63
35.54
56.17
56.01
84.71
84.70 134.08
–
-0.91 – 6.04
–
[m]
Unit: feet
Screen size
(diagonal)
Distance to screen (L)
Zoom
ET-DLE085
Zoom lens
[m]
[in]
min.
max.
ET-DLE150
Zoom lens
min.
Supplied lens/ET-DLE170
Zoom lens
max.
min.
max.
Fixed-focus
ET-DLE250
Zoom lens
min.
ET-DLE350
Zoom lens
ET-DLE450
Zoom lens
max.
min.
max.
min.
max.
ET-DLE055
Fixed-focus
lens
Height from the edge
of screen to
center of lens (H)
Zoom
lenses
Fixedfocus
lens
1.27 / 50
3.2
4.1
5.4
7.9
7.2
10.1
9.5
15.1
14.9
22.8
22.2
35.8
3.2
-0.2 – 1.7
1.2
1.52 / 60
3.9
4.9
6.5
9.5
8.6
12.1
11.4
18.2
18.0
27.4
26.9
43.1
3.9
-0.3 – 2.0
1.5
1.78 / 70
4.6
5.7
7.6
11.1
10.1
14.2
13.4
21.3
21.1
32.0
31.5
50.5
4.6
-0.4 – 2.3
1.7
2.03 / 80
5.3
6.6
8.8
12.7
11.6
16.2
15.3
24.3
24.1
36.7
36.2
57.8
5.3
-0.4 – 2.6
2.0
2.29 / 90
6.0
7.4
9.8
14.3
13.1
18.3
17.3
27.4
27.2
41.3
40.8
65.2
6.0
-0.4 – 3.0
2.3
2.54 / 100
6.7
8.3
11.0
15.9
14.5
20.4
19.2
30.5
30.2
46.0
45.5
72.5
6.7
-0.5 – 3.3
2.5
3.05 / 120
8.0
9.9
13.2
19.1
17.5
24.5
23.1
36.6
36.4
55.2
54.8
87.2
8.0
-0.6 – 4.0
3.0
3.81 / 150
10.0
12.5
16.5
24.0
21.9
30.7
28.9
45.9
45.6
69.2
68.7
109.3
10.1
-0.8 – 5.0
3.7
5.08 / 200
13.5
16.7
22.1
32.0
29.3
41.0
38.7
61.3
61.0
92.4
92.0
146.0
13.5
-1.0 – 6.6
5.0
6.35 / 250
16.8
20.9
27.7
40.1
36.6
51.3
48.4
76.6
76.3
115.6
115.2
182.7
–
-1.3 – 8.3
–
7.62 / 300
20.2
25.1
33.3
48.1
44.0
61.6
58.2
92.0
91.7
138.7
138.5
219.5
–
-1.5 – 9.9
–
10.16 / 400
27.0
33.5
44.4
64.2
58.8
82.2
77.7
122.8
122.4
185.1
184.9
292.9
–
-2.0 – 13.2
–
12.70 / 500
33.8
41.9
55.6
80.3
73.6
102.8
97.1
153.5
153.1
231.5
231.4
366.4
–
-2.5 – 16.5
–
15.24 / 600
40.6
50.4
66.7
96.4
88.3
123.5
116.6
184.3
183.8
277.9
277.9
439.9
–
-3.0 – 19.8
–
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
Note: When the ET-DLE055 is mounted, the optical lens shift function cannot be used.
As of July 2016
SFD16M035
10/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
Standard setting-up position (If using the ET-DLE030)
546〜706* 1
(21-1/2–
27-25/32)
NOTE:
Illustrations show the projector
installed using optional ceiling mount
bracket ET-PKD130H, optional bracket
assembly ET-PKD130B and an optional lens.
ø60.5
This illustration is not drawn to scale.
*1 Continuous height adjustment possible.
299.5
(11-25/32)
238.5
(9-3/8)
L3
A1
A2
L4
L1
Upper edge of
projected image
unit : mm (inch)
Projected image
Lower edge of
projected image
L1
A2
A1
L3
L4
NOTE:
Illustrations show the projector
installed using optional ceiling mount
bracket ET-PKD130H, optional bracket
assembly ET-PKD130B and an optional lens.
Projected image
380
(14-31/32)
100
(3-15/16)
This illustration is not drawn to scale.
100
(3-15/16)
308
(12-1/8)
Caution:
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling
down from the ceiling, use the supplied wire on the mounting bracket.
As of July 2016
SFD16M035
11/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
Projection distance for 16:10 aspect ratio screen (If using the ET-DLE030)
Unit : meters
Ultra-short focal length lens ET-DLE030
Close-up system dimensions
Throw ratio
0.40:1
Projection distance
(From mirror reflective
surface to screen)
(L1)
From front of
set to screen
(L3)
From rear of
set to screen
(L4)
From top of set to
bottom edge of
screen (A1)
From bottom of set
to bottom edge of
screen (A2)
Diagonal
image
size
(Inches)
Diagonal
image
size
(m)
Height
(SH)
Width
(SW)
100
2.54
1.35
2.15
0.86
0.69
0.16
0.59
0.79
120
3.05
1.62
2.59
1.03
0.86
0.33
0.72
0.92
150
3.81
2.02
3.23
1.29
1.12
0.58
0.92
1.12
200
5.08
2.69
4.31
1.71
1.55
1.01
1.25
1.45
250
6.35
3.37
5.39
2.14
1.98
1.44
1.58
1.78
300
7.62
4.04
6.46
2.57
2.40
1.86
1.91
2.11
350
8.89
4.71
7.54
3.00
2.83
2.29
2.24
2.44
Unit : feet
Ultra-short focal length lens ET-DLE030
Close-up system dimensions
Throw ratio
0.40:1
From front of
set to screen
(L3)
From rear of
set to screen
(L4)
From top of set to
bottom edge of
screen (A1)
From bottom of set
to bottom edge of
screen (A2)
Diagonal
image
size
(m)
Height
(SH)
100
2.54
4.4
7.1
2.8
2.3
0.5
1.9
2.6
120
3.05
5.3
8.5
3.4
2.8
1.1
2.4
3.0
150
3.81
6.6
10.6
4.2
3.7
1.9
3.0
3.7
200
5.08
8.8
14.1
5.6
5.1
3.3
4.1
4.8
250
6.35
11.0
17.7
7.0
6.5
4.7
5.2
5.8
300
7.62
13.3
21.2
8.4
7.9
6.1
6.3
6.9
350
8.89
15.5
24.7
9.8
9.3
7.5
7.3
8.0
The value for L1 may contain an error of within ±5%.
When using vertical keystone correction, the images will be corrected so that they will tend to be smaller than the specified screen size.
This measurement is not the distance between the rear of the projector and the wall, but is instead the distance between the rear of the projector and the screen surface.
Leave at least 500 mm of space between the rear of the projector and the wall and any other objects in order to provide adequate ventilation space. If setting up the
projector in a closed room, be sure to provide separate air conditioning and ventilation equipment. If there is insufficient ventilation in the room, radiated heat may build up
and cause the protection circuit of the projector to operate.
Screen
*
*
*
Width
(SW)
Projection distance
(From mirror reflective
surface to screen)
(L1)
Diagonal
image
size
(Inches)
L1
L3
A1
L1: Projection distance
(from screen to mirror reflective surface)
L3: From screen to front of set
L4: From screen to rear of set
A1: From bottom edge of screen to top of set
A2: From bottom edge of screen to bottom of set
A2
L4
Projection Distance Calculation Table
Screen aspect ratio 16:10
Projection distance calculation formula
L1 (m) = 0.3205 x Diagonal image size + 0.0047
Calculation formula for distance from top of set to bottom edge of screen
A1 (m) = 0.1977 x Diagonal image size - 0.07210
As of July 2016
SFD16M035
12/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
Projection distance for 16:9 aspect ratio screen (If using the ET-DLE030)
Unit : meters
Ultra-short focal length lens ET-DLE030
Close-up system dimensions
Throw ratio
0.40:1
Projection distance
(From mirror reflective
surface to screen)
(L1)
From front of
set to screen
(L3)
From rear of
set to screen
(L4)
From top of set to
bottom edge of
screen (A1)
From bottom of set
to bottom edge of
screen (A2)
Diagonal
image
size
(Inches)
Diagonal
image
size
(m)
Height
(SH)
Width
(SW)
100
2.54
1.25
2.21
0.88
0.72
0.18
0.67
0.87
120
3.05
1.49
2.66
1.06
0.89
0.35
0.82
1.02
150
3.81
1.87
3.32
1.32
1.16
0.62
1.05
1.25
200
5.08
2.49
4.43
1.76
1.60
1.06
1.42
1.62
250
6.35
3.11
5.54
2.20
2.03
1.50
1.79
1.99
300
7.62
3.74
6.64
2.64
2.47
1.94
2.17
2.37
350
8.89
4.36
7.75
3.08
2.91
2.38
2.54
2.74
Unit : feet
Ultra-short focal length lens ET-DLE030
Close-up system dimensions
Throw ratio
0.40:1
From front of
set to screen
(L3)
From rear of
set to screen
(L4)
From top of set to
bottom edge of
screen (A1)
From bottom of set
to bottom edge of
screen (A2)
Diagonal
image
size
(m)
Height
(SH)
100
2.54
4.1
7.3
2.9
2.4
0.6
2.2
2.9
120
3.05
4.9
8.7
3.5
2.9
1.1
2.7
3.3
150
3.81
6.1
10.9
4.3
3.8
2.0
3.4
4.1
200
5.08
8.2
14.5
5.8
5.2
3.5
4.7
5.3
250
6.35
10.2
18.2
7.2
6.7
4.9
5.9
6.5
300
7.62
12.3
21.8
8.7
8.1
6.4
7.1
7.8
350
8.89
14.3
25.4
10.1
9.5
7.8
8.3
9.0
The value for L1 may contain an error of within ±5%.
When using vertical keystone correction, the images will be corrected so that they will tend to be smaller than the specified screen size.
This measurement is not the distance between the rear of the projector and the wall, but is instead the distance between the rear of the projector and the screen surface.
Leave at least 500 mm of space between the rear of the projector and the wall and any other objects in order to provide adequate ventilation space. If setting up the
projector in a closed room, be sure to provide separate air conditioning and ventilation equipment. If there is insufficient ventilation in the room, radiated heat may build up
and cause the protection circuit of the projector to operate.
Screen
*
*
*
Width
(SW)
Projection distance
(From mirror reflective
surface to screen)
(L1)
Diagonal
image
size
(Inches)
L1
L3
A1
L1: Projection distance
(from screen to mirror reflective surface)
L3: From screen to front of set
L4: From screen to rear of set
A1: From bottom edge of screen to top of set
A2: From bottom edge of screen to bottom of set
A2
L4
Projection Distance Calculation Table
Screen aspect ratio 16:9
Projection distance calculation formula
L1 (m) = 0.3294 x Diagonal image size + 0.0047
Calculation formula for distance from top of set to bottom edge of screen
A1 (m) = 0.2304 x Diagonal image size - 0.07210
As of July 2016
SFD16M035
13/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
Projection distance for 4:3 aspect ratio screen (If using the ET-DLE030)
Unit : meters
Ultra-short focal length lens ET-DLE030
Close-up system dimensions
Throw ratio
0.48:1
Projection distance
(From mirror reflective
surface to screen)
(L1)
From front of
set to screen
(L3)
From rear of
set to screen
(L4)
From top of set to
bottom edge of
screen (A1)
From bottom of set
to bottom edge of
screen (A2)
Diagonal
image
size
(Inches)
Diagonal
image
size
(m)
Height
(SH)
Width
(SW)
100
2.54
1.52
2.03
0.97
0.81
0.27
0.67
0.87
120
3.05
1.83
2.44
1.17
1.00
0.46
0.82
1.02
150
3.81
2.29
3.05
1.46
1.29
0.75
1.05
1.25
200
5.08
3.05
4.06
1.94
1.77
1.24
1.42
1.62
250
6.35
3.81
5.08
2.42
2.26
1.72
1.79
1.99
300
7.62
4.57
6.10
2.91
2.74
2.20
2.17
2.37
350
8.89
5.33
7.11
3.39
3.22
2.69
2.54
2.74
Unit : feet
Ultra-short focal length lens ET-DLE030
Close-up system dimensions
Throw ratio
0.48:1
From front of
set to screen
(L3)
From rear of
set to screen
(L4)
From top of set to
bottom edge of
screen (A1)
From bottom of set
to bottom edge of
screen (A2)
Diagonal
image
size
(m)
Height
(SH)
100
2.54
5.0
6.7
3.2
2.7
0.9
2.2
2.9
120
3.05
6.0
8.0
3.8
3.3
1.5
2.7
3.3
150
3.81
7.5
10.0
4.8
4.2
2.5
3.4
4.1
200
5.08
10.0
13.3
6.4
5.8
4.1
4.7
5.3
250
6.35
12.5
16.7
7.9
7.4
5.6
5.9
6.5
300
7.62
15.0
20.0
9.5
9.0
7.2
7.1
7.8
350
8.89
17.5
23.3
11.1
10.6
8.8
8.3
9.0
The value for L1 may contain an error of within ±5%.
When using vertical keystone correction, the images will be corrected so that they will tend to be smaller than the specified screen size.
This measurement is not the distance between the rear of the projector and the wall, but is instead the distance between the rear of the projector and the screen surface.
Leave at least 500 mm of space between the rear of the projector and the wall and any other objects in order to provide adequate ventilation space. If setting up the
projector in a closed room, be sure to provide separate air conditioning and ventilation equipment. If there is insufficient ventilation in the room, radiated heat may build up
and cause the protection circuit of the projector to operate.
Screen
*
*
*
Width
(SW)
Projection distance
(From mirror reflective
surface to screen)
(L1)
Diagonal
image
size
(Inches)
L1
L3
A1
L1: Projection distance
(from screen to mirror reflective surface)
L3: From screen to front of set
L4: From screen to rear of set
A1: From bottom edge of screen to top of set
A2: From bottom edge of screen to bottom of set
A2
L4
Projection Distance Calculation Table
Screen aspect ratio 4:3
Projection distance calculation formula
L1 (m) = 0.3628 x Diagonal image size + 0.0047
Calculation formula for distance from top of set to bottom edge of screen
A1 (m) = 0.2238 x Diagonal image size - 0.07210
As of July 2016
SFD16M035
14/20
DLP™ Projector
PT-RW930B/RW930W/RW930LB/RW930LW
Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.
Aspect ratio 16:10
ET-DLE085
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0183 - 0.0471
L (m) = (diagonal screen size in inches) × 0.0227 - 0.0442
ET-DLE150
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0300 - 0.0540
L (m) = (diagonal screen size in inches) × 0.0433 - 0.0498
Supplied lens/
ET-DLE170
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0398 - 0.0746
L (m) = (diagonal screen size in inches) × 0.0555 - 0.0725
ET-DLE250
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0524 - 0.0800
L (m) = (diagonal screen size in inches) × 0.0828 - 0.0792
ET-DLE350
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0827 - 0.1351
L (m) = (diagonal screen size in inches) × 0.1249 - 0.1346
ET-DLE450
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1252 - 0.3017
L (m) = (diagonal screen size in inches) × 0.1979 - 0.2991
ET-DLE030
(fixed focus)
ET-DLE055
(fixed focus)
L1 (m) = (diagonal screen size in inches) × 0.0085 - 0.0047
L3 (m) = L1-0.166
L4 (m) = L1-0.704
L (m) = (diagonal screen size in inches) × 0.0184 - 0.0476
ET-DLE085
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0188 - 0.0471
L (m) = (diagonal screen size in inches) × 0.0233 - 0.0442
ET-DLE150
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0309 - 0.0540
L (m) = (diagonal screen size in inches) × 0.0445 - 0.0498
Supplied lens/
ET-DLE170
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0409 - 0.0746
L (m) = (diagonal screen size in inches) × 0.0571 - 0.0725
ET-DLE250
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0539 - 0.0800
L (m) = (diagonal screen size in inches) × 0.0851 - 0.0792
ET-DLE350
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0850 - 0.1351
L (m) = (diagonal screen size in inches) × 0.1284 - 0.1346
ET-DLE450
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1286 - 0.3017
L (m) = (diagonal screen size in inches) × 0.2034 - 0.2991
ET-DLE030
(fixed focus)
L1 (m) = (diagonal screen size in inches) × 0.0088 - 0.0047
L3 (m) = L1-0.166
L4 (m) = L1-0.704
ET-DLE055
(fixed focus)
L (m) = (diagonal screen size in inches) × 0.0189 - 0.0476
ET-DLE085
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0207 - 0.0471
L (m) = (diagonal screen size in inches) × 0.0257 - 0.0442
ET-DLE150
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0340 - 0.0540
L (m) = (diagonal screen size in inches) × 0.0490 - 0.0498
Supplied lens/
ET-DLE170
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0450 - 0.0746
L (m) = (diagonal screen size in inches) × 0.0628 - 0.0725
ET-DLE250
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0594 - 0.0800
L (m) = (diagonal screen size in inches) × 0.0938 - 0.0792
ET-DLE350
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0936 - 0.1351
L (m) = (diagonal screen size in inches) × 0.1414 - 0.1346
ET-DLE450
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1417 - 0.3017
L (m) = (diagonal screen size in inches) × 0.2240 - 0.2991
ET-DLE030
(fixed focus)
L1 (m) = (diagonal screen size in inches) × 0.0097 - 0.0047
L3 (m) = L1-0.166
L4 (m) = L1-0.704
ET-DLE055
(fixed focus)
L (m) = (diagonal screen size in inches) × 0.0208 - 0.0476
Aspect ratio 16:9
Aspect ratio 4:3
• Distances calculated with the above equations will include a slight error.
As of July 2016
SFD16M035
15/20
DLP™ Projector
PT-RW930B/RW930W/RW930LB/RW930LW
Formula for calculating possible heights when using the ET-DLE030
If using a screen size which has not been previously mentioned, use the following calculation formulas to
obtain the possible setting-up height.
For screen aspect ratio of 16:10
Possible setting-up height A1 (mm) = Projection screen size (inches) x 6.6-74.0
Possible setting-up height A2 (mm) = A1 + 200
For screen aspect ratio of 16:9
Possible setting-up height A1 (mm) = Projection screen size (inches) x 7.5-74.0
Possible setting-up height A2 (mm) = A1 + 200
For screen aspect ratio of 4:3
Possible setting-up height A1 (mm) = Projection screen size (inches) x 7.5-74.0
Possible setting-up height A2 (mm) = A1 + 200
* There may be a small margin of error in the values obtained from the above formulas.
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
• Floor mount
• Ceiling mount
(When the lens except the ET-DLE085 is mounted.)
0.1H
Projected image height V
0.6V
0.1H
0.16V
Projected image width H
• Floor mount
Standard projection postition
0.3H
• Ceiling mount
Projected image width H
0.16V
0.6V
Projected image height V
Projected image width H
0.1H
Projected image height V
0.28H
0.6V
Standard projection postition
(When the ET-DLE085 is mounted.)
0.16V
(When the ET-DLE085 is mounted.)
0.1H
Projected image width H
0.6V
0.1H
Projected image height V
0.1H
0.16V
0.3H
Standard projection postition
(When the lens except the ET-DLE085 is mounted.)
0.28H
Standard projection postition
• The ET-DLE055 has a fixed short-focus lens. Therefore, the lens shift function provided in the main unit cannot be used.
As of July 2016
SFD16M035
16/20
DLP™ Projector
PT-RW930B/RW930W/RW930LB/RW930LW
Installable angle
Install the projector at an angle within the range shown below.
FULL 360-degree projection
360°
360°
360°
Vertical 360-deg.
Horizontal 360-deg.
Tilting 360-deg.
(V&H combination)
As of July 2016
SFD16M035
17/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
List of compatible signals
The following table specifies the video signals compatible with the projector.
• Symbols that indicate formats are as follows.
––V：VIDEO, Y/C
––R: RGB (analog)
––Y: YC B C R /YP B P R (analog)
––D: DVI-D
––H: HDMI
• Input corresponding to each item in the plug and play column is as follows.
–– RGB2: RGB2 input
–– DVI-D: DVI-D input
–– HDMI/DL: HDMI input, DIGITAL LINK input
Scanning freq.
H
V
(KHz) (Hz)
Plug and Play*1
DVD-D
EDID1
EDID2
EDID3
Dot
clock freq.
(MHz)
Format
59.9
―
V
―
―
―
―
―
50.0
―
V
―
―
―
―
―
13.5
R/Y
―
―
―
―
―
13.5
R/Y
―
―
―
―
―
59.9
27.0
D/H
―
―
―
―
―
15.6
50.0
27.0
D/H
―
―
―
―
―
720 x 480
31.5
59.9
27.0
R/Y/D/H
―
䘟
―
䘟
䘟
576/50p
720 x 576
31.3
50.0
27.0
R/Y/D/H
―
䘟
―
䘟
䘟
720/60p
1280 x 720
45.0
60.0
74.3
R/Y/D/H
―
䘟
―
䘟
䘟
720/50p
1280 x 720
37.5
50.0
74.3
R/Y/D/H
―
䘟
―
䘟
䘟
1080/60i
1920 x 1080i
33.8
60.0
74.3
R/Y/D/H
―
䘟
―
䘟
䘟
1080/50i
1920 x 1080i
28.1
50.0
74.3
R/Y/D/H
―
䘟
―
䘟
䘟
1080/24p
1920 x 1080
27.0
24.0
74.3
R/Y/D/H
―
䘟
―
䘟
䘟
1080/24sF
1920 x 1080i
27.0
48.0
74.3
R/Y/D/H
―
―
―
―
―
1080/25p
1920 x 1080
28.1
25.0
74.3
R/Y/D/H
―
䘟
―
䘟
―
1080/30p
1920 x 1080
33.8
30.0
74.3
R/Y/D/H
―
―
―
―
―
1080/60p
1920 x 1080
67.5
60.0
148.5
R/Y/D/H
―
䘟
―
䘟
䘟
1080/50p
1920 x 1080
56.3
50.0
148.5
R/Y/D/H
―
䘟
―
䘟
䘟
640 x 400/70
640 x 400
31.5
70.1
25.2
R/D/H
―
―
―
―
―
640 x 400/85
640 x 400
37.9
85.1
31.5
R/D/H
―
―
―
―
―
640 x 480/60
640 x 480
31.5
59.9
25.2
R/D/H
䘟
䘟
䘟
䘟
䘟
640 x 480/67
640 x 480
35.0
66.7
30.2
R/D/H
―
―
―
―
―
640 x 480/73
640 x 480
37.9
72.8
31.5
R/D/H
䘟
―
䘟
䘟
䘟
640 x 480/75
640 x 480
37.5
75.0
31.5
R/D/H
䘟
―
䘟
䘟
䘟
640 x 480/85
640 x 480
43.3
85.0
36.0
R/D/H
―
―
―
―
―
800 x 600/56
800 x 600
35.2
56.3
36.0
R/D/H
䘟
―
䘟
䘟
䘟
800 x 600/60
800 x 600
37.9
60.3
40.0
R/D/H
䘟
―
䘟
䘟
䘟
800 x 600/72
800 x 600
48.1
72.2
50.0
R/D/H
䘟
―
䘟
䘟
䘟
800 x 600/75
800 x 600
46.9
75.0
49.5
R/D/H
䘟
―
䘟
䘟
䘟
800 x 600/85
800 x 600
53.7
85.1
56.3
R/D/H
―
―
―
―
―
832 x 624/75
832 x 624
49.7
74.6
57.3
R/D/H
䘟
―
䘟
䘟
䘟
1024 x 768/50
1024 x 768
39.6
50.0
51.9
R/D/H
―
―
―
―
―
1024 x 768/60
1024 x 768
48.4
60.0
65.0
R/D/H
䘟
―
䘟
䘟
䘟
1024 x 768/70
1024 x 768
56.5
70.1
75.0
R/D/H
䘟
―
䘟
䘟
䘟
1024 x 768/75
1024 x 768
60.0
75.0
78.8
R/D/H
䘟
―
䘟
䘟
䘟
1024 x 768/82
1024 x 768
65.5
81.6
86.0
R/D/H
―
―
―
―
―
1024 x 768/85
1024 x 768
68.7
85.0
94.5
R/D/H
―
―
―
―
―
1024 x 768/100
1024 x 768
81.4
100.0
113.3
R/D/H
―
―
―
―
―
1024 x 768/120
1024 x 768
98.7
120.0
139.1
R/D/H
䘟
―
䘟
䘟
䘟
1152 x 864/60
1152 x 864
53.7
60.0
81.6
R/D/H
―
―
―
―
―
1152 x 864/70
1152 x 864
64.0
70.0
94.2
R/D/H
―
―
―
―
―
1152 x 864/75
1152 x 864
67.5
75.0
108.0
R/D/H
―
―
―
―
―
1152 x 864/85
1152 x 864
77.1
85.0
119.7
R/D/H
―
―
―
―
―
1152 x 870/75
1152 x 870
68.7
75.1
100.0
R/D/H
䘟
―
䘟
䘟
䘟
1280 x 720/50
1280 x 720
37.1
49.8
60.5
R/D/H
―
―
―
―
―
1280 x 720/60
1280 x 720
44.8
59.9
74.5
R/D/H
―
―
―
―
―
1280 x 720/100
1280 x 720
76.3
100.0
131.8
R/D/H
―
―
―
―
―
1280 x 720/120
1280 x 720
92.6
120.0
161.6
R/D/H
―
―
―
―
―
Compatible signal
Resolution
(Dots)
NTSC/NTSC4.43/PAL-M/PAL60
720 x 480i
15.7
PAL/PAL-N/SECAM
720 x 576i
15.6
480/60i
720 x 480i
15.7
59.9
576/50i
720 x 576i
15.6
50.0
480/60i
720(1440) x 480i*2
15.7
576/50i
720(1440) x 576i*2
480/60p
As of July 2016
SFD16M035
RGB2
HDMI
DL
18/20
PT-RW930B/RW930W/RW930LB/RW930LW
DLP™ Projector
The following table specifies the video signals compatible with the projector.
• Symbols that indicate formats are as follows.
––V：VIDEO, Y/C
––R: RGB (analog)
––Y: YC B C R /YP B P R (analog)
––D: DVI-D
––H: HDMI
• Input corresponding to each item in the plug and play column is as follows.
–– RGB2: RGB2 input
–– DVI-D: DVI-D input
–– HDMI/DL: HDMI input, DIGITAL LINK input
Scanning freq.
H
V
(KHz) (Hz)
Plug and Play*1
DVD-D
EDID1
EDID2
EDID3
HDMI
DL
―
―
―
―
―
―
―
―
―
―
―
―
―
R/D/H
―
―
―
―
―
R/D/H
―
―
―
―
―
68.0
R/D/H
―
―
―
―
―
83.5
R/D/H
䘟
䘟
䘟
䘟
䘟
59.9
71.0
R/D/H
―
―
―
―
―
62.8
74.9
106.5
R/D/H
―
―
―
―
―
1280 x 800
71.6
84.9
122.5
R/D/H
―
―
―
―
―
1280 x 960/60
1280 x 960
60.0
60.0
108.0
R/D/H
―
―
―
―
―
1280 x 1024/50
1280 x 1024
52.4
50.0
88.0
R/D/H
―
―
―
―
―
1280 x 1024/60
1280 x 1024
64.0
60.0
108.0
R/D/H
―
―
―
―
―
1280 x 1024/66
1280 x 1024
72.3
66.3
125.0
R/D/H
―
―
―
―
―
1280 x 1024/72
1280 x 1024
78.2
72.0
135.1
R/D/H
―
―
―
―
―
1280 x 1024/75
1280 x 1024
80.0
75.0
135.0
R/D/H
䘟
―
䘟
䘟
䘟
1280 x 1024/85
1280 x 1024
91.1
85.0
157.5
R/D/H
―
―
―
―
―
1366 x 768/50
1366 x 768
39.6
49.9
69.0
R/D/H
―
―
―
―
―
1366 x 768/60
1366 x 768
47.7
59.8
85.5
R/D/H
―
―
―
―
―
1400 x 1050/50
1400 x 1050
54.1
50.0
99.9
R/D/H
―
―
―
―
―
1400 x 1050
64.0
60.0
108.0
R/D/H
―
―
―
―
―
1400 x 1050
65.3
60.0
121.8
R/D/H
―
―
―
―
―
1400 x 1050
65.2
60.0
122.6
R/D/H
䘟
―
䘟
䘟
䘟
―
―
―
―
Dot
clock freq.
(MHz)
Format
49.9
65.3
R/D/H
―
59.9
79.5
R/D/H
―
47.4
60.0
68.3
R/D/H
1280 x 768
60.3
74.9
102.3
1280 x 768/85
1280 x 768
68.6
84.8
117.5
1280 x 800/50
1280 x 800
41.3
50.0
1280 x 800
49.7
59.8
1280 x 800*3
49.3
1280 x 800/75
1280 x 800
1280 x 800/85
Compatible signal
Resolution
(Dots)
1280 x 768/50
1280 x 768
39.6
1280 x 768
47.8
1280 x 768*3
1280 x 768/75
1280 x 768/60
1280 x 800/60
1400 x 1050/60
RGB2
1400 x 1050/72
1400 x 1050
78.8
72.0
149.3
R/D/H
―
1400 x 1050/75
1400 x 1050
82.2
75.0
155.9
R/D/H
―
―
―
―
―
1440 x 900/50
1440 x 900
46.3
49.9
86.8
R/D/H
―
―
―
―
―
1440 x 900/60
1440 x 900
55.9
59.9
106.5
R/D/H
―
―
―
―
―
1600 x 900/50
1600 x 900
46.4
49.9
96.5
R/D/H
―
―
―
―
―
1600 x 900/60
1600 x 900
55.9
60.0
119.0
R/D/H
䘟
―
䘟
䘟
䘟
1600 x 1200/50
1600 x 1200
61.8
49.9
131.5
R/D/H
―
―
―
―
―
1600 x 1200/60
1600 x 1200
75.0
60.0
162.0
R/D/H
䘟
―
䘟
䘟
䘟
1680 x 1050/50
1680 x 1050
54.1
50.0
119.5
R/D/H
―
―
―
―
―
1680 x 1050/60
1680 x 1050
65.3
60.0
146.3
R/D/H
―
―
―
―
―
1920 x 1080/50
1920 x 1080
55.6
49.9
141.5
R/D/H
―
―
―
―
―
1920 x 1080*3
66.6
59.9
138.5
R/D/H
―
―
―
―
―
―
―
―
―
1920 x 1080/60
1920 x 1080*4
67.2
60.0
173.0
R
―
1920 x 1200/50
1920 x 1200
61.8
49.9
158.3
R/D/H
―
―
―
―
―
1920 x 1200/60
1920 x 1200*4
74.6
59.9
193.3
R
―
―
―
―
―
1920 x 1200/60RB
1920 x 1200*3
74.0
60.0
154.0
R/D/H
䘟
―
䘟
―
―
*1 Signals with a 䘟㻌in the Plug and play columns are signals described in EDID (extended display identification data) of the projector. If a signal has no
䘟㻌in the Plug and play columns but has an entry in the Format column, it can be input. For signals without a 䘟㻌in the Plug and play columns, there
are instances when resolution cannot be selected on the computer even though the projector supports them.
*2 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)
*3 Compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*4 Image resolution is reduced by the image processing circuit before projection.
NOTE:
• A signal with a different resolution is converted to the number of display dots. The number of display dots is as follows.
1920 x 1200
• The “i” at the end of the resolution indicates an interlaced signal.
• When interlaced signals are connected, flickering may occur on the projected image.
• DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
As of July 2016
SFD16M035
19/20
DLP™ Projector
PT-RW930B/RW930W/RW930LB/RW930LW
Notes on projector placement and operation
• Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports
(intake and exhaust) of the projector.
• Do not stack projectors on top of each other.
• Do not block the ventilation ports (intake and exhaust) of the projector.
500mm(20")or longer
500mm(20")or longer
500mm(20")or longer
100mm(4")or longer
• Do not install the projector in a confined space.
When installing the projector in a confined space, provide air conditioning or ventilation separately.
Exhaust heat may accumulate when the ventilation is not enough, triggering the protection circuit of
the projector.
As of July 2016
SFD16M035
20/20