GBJ6005 - GBJ610 6.0A GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · Glass Passivated Die Construction · Lead Free Finish/RoHS Compliant (Note 4) GBJ High Case Dielectric Strength of 1500VRMS Low Reverse Leakage Current Surge Overload Rating to 170A Peak Ideal for Printed Circuit Board Applications L UL Listed Under Recognized Component Index, File Number E94661 A K M B Mechanical Data S _ · · Case: GBJ · · · Moisture Sensitivity: Level 1 per J-STD-020C N J P D Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 H C Lead Free Plating (Tin Finish). · · · · · G E Min Max A 29.70 30.30 B 19.70 20.30 C 17.00 18.00 D 3.80 4.20 E 7.30 7.70 G 9.80 10.20 H 2.00 2.40 I 0.90 1.10 J 2.30 2.70 3.0 X 45° K R I Terminals: Plated Leads, Solderable per MIL-STD-202, Method 208 e3 Dim E Polarity: Molded on Body L 4.40 4.80 M 3.40 3.80 N 3.10 3.40 P 2.50 2.90 Mounting: Through Hole for #6 Screw R 0.60 0.80 Mounting Torque: 5.0 in-lbs Maximum S 10.80 11.20 All Dimensions in mm Marking: Type Number Weight: 6.6 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Output Current @ TC = 110°C Symbol GBJ 6005 GBJ 601 GBJ 602 GBJ 604 GBJ 606 GBJ 608 GBJ 610 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 6.0 A Non-Repetitive Peak Forward Surge Current, 8.3 ms single half-sine-wave superimposed on rated load IFSM 170 A Forward Voltage per element VFM 1.0 V IR 5.0 500 µA I2 t 120 A2 s CT Peak Reverse Current at Rated DC Blocking Voltage I2 t @ IF = 3.0A @ TC = 25°C @ TC= 125°C Rating for Fusing (t < 8.3ms) (Note 1) Typical Total Capacitance per Element (Note 2) Typical Thermal Resistance Junction to Case (Note 3) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 55 pF RqJC 1.8 °C/W Tj, TSTG -65 to +150 °C Non-repetitive, for t > 1ms and < 8.3 ms. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. Thermal resistance from junction to case per element. Unit mounted on 75 x 75 x 1.6mm aluminum plate heat sink. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS21216 Rev. 7 - 2 1 of 3 www.diodes.com GBJ6005-GBJ610 ã Diodes Incorporated With heatsink 5 4 3 Without heatsink 2 1 Resistive or Inductive load 0 25 50 75 100 125 150 10 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 6 1.0 0.1 Tj = 25°C 0.01 0 0.4 0.8 1.2 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) 180 100 Tj = 25°C f = 1MHz Single half-sine-wave 160 CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve Tj = 150°C 120 80 40 10 0 1 1 100 10 1 NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Surge Current 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, Per Element 1000 100 Tj = 125°C Tj = 100°C 10 Tj = 50°C 1.0 Tj = 25°C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics DS21216 Rev. 7 - 2 2 of 3 www.diodes.com GBJ6005-GBJ610 Ordering Information Notes: (Note 5) Device Packaging Shipping GBJ6005-F GBJ 15/Tube GBJ601-F GBJ 15/Tube GBJ602-F GBJ 15/Tube GBJ604-F GBJ 15/Tube GBJ606-F GBJ 15/Tube GBJ608-F GBJ 15/Tube GBJ610-F GBJ 15/Tube 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21216 Rev. 7 - 2 3 of 3 www.diodes.com GBJ6005-GBJ610