EUROQUARTZ EQXOPL-2050UC Low jitter 8 pin dual-in-line programmable oscillator Datasheet

FACTORY PROGRAMMED OSCILLATORS
EQXOPL-2000 SERIES
Low Jitter 8 pin Dual-in-Line
Programmable Oscillators
OUTLINE & DIMENSIONS
DESCRIPTION
The Euroquartz range of factory programmable oscillators provide custom
frequency and specification oscillators within very short lead times. The
parts are very reliable in use and have stabilities from ±25ppm over -40°
to 85°C. In addition to the stability over operating temperature range
customers may also choose from supply voltages of 2.7, 3.3 and 5.0
Volts, Enable/Disable or Power Down functions and output synchronous
or asynchronous .
FEATURES
•
•
•
•
•
•
Very quick delivery available
Industry-standard 8 pin DIL (1/2 size) package
Frequency range 1MHz to 133MHz
Ultra low jitter @ 1 million samples
Supply Voltages 2.7 Volts, 3.3 Volts or 5.0 Volts
Enable/Disable or Power Down options
OPERATING LOAD CONDITIONS
GENERAL SPECIFICATION
Package Type:
Frequency Range
5.0 Volt Supply:
3.3 Volt Supply:
2.7 Volt Supply:
Frequency Stability*:
8 pin DIL, Resistance-welded
Synchronous:
Asynchronous:
Output Disable Time
Synchronous:
Asynchronous:
T/2ns typical, T+10ns maximum
10ns typical, 15ns maximum
Maximum Capacitive Load TTL
5.0 Volt Supply
1.0MHz ~ 40MHz:
40.1MHz ~ 133MHz:
50pF
1.0MHz to 133.0MHz
25pF
1.0MHz to 100.0MHz
1.0MHz to 100.0MHz
Maximum Capacitive Load CMOS
±25ppm to ±100ppm
5.0 Volt Supply
(over operating temperature range)
1.0MHz ~ 66MHz:
50pF
Operating Temperature Range
66.1MHz ~ 133MHz:
25pF
Choice of three ranges: 0° ~ +70°C
Part code: ‘C’
3.3 Volt/2.7 Volt Supply
-20° ~ +70°C
Part code: ‘D’
1.0MHz ~ 40MHz:
30pF
-40° ~ +85°C
Part code: ‘I’
40.1MHz ~ 100MHz:
15pF
Storage Temperature Range:
-55° to +125°C
Ageing:
±5ppm/year maximum
PRODUCT SELECTION
(Ta=25°C, Vdd=2.7V, 3.3V or 5.0V)
Packaging:
Bulk pack or tubed
Frequency
Operating
Output Levels:
TTL or CMOS
Model Number
Stability
Temperature
Maximum Output Loads
(ppm)
Range
<40MHz:
30pF (See note opposite)
EQXOPL-2100UC
±100
0°~+70°
>40MHz:
15pF (See note opposite)
EQXOPL-2050UC
±50
0°~+70°
Duty Cycle
EQXOPL-2025UC
±25
0°~+70°
CMOS <40MHz:
45/55% maximum
EQXOPL-2100UD
±100
-20°~+70°
CMOS >40MHz:
40/60% maximum
EQXOPL-2050UD
±50
-20°~+70°
Output Clock Rise/Fall Times:
4ns maximum
EQXOPL-2025UD
±25
-20°~+70°
Power Supply Current:
25mA (unloaded
)
EQXOPL-2100UI
±100
-40°~+85°
Standby Current:
10µA typical 50µA maximum
EQXOPL-2050UI
±50
-40°~+85°
Start-up Time:
10ms maximum (from power-on)
EQXOPL-2025UI
±25
-40°~+85°
Power Down Delay Time
Output Enable Time:
T/2ns typical, T+10ns maximum
10ns typical, 15ns maximum
(T = frequency period)
100ns maximum
Period Jitter Σ, 1MHz~133MHz: 8ps typical, 99ps maximum
Period Jitter Peak to Peak
<33.0MHz:
65ps typical, 99ps maximum
33MHz~133MHz:
65ps typical, 80ps maximum
PART NUMBER GENERATION
Frequency
Model No.
Nominal
Frequency
(MHz)
See table
above
EXAMPLE:
Output
Option
Supply
Voltage
Blank = 5.0 Volts
A=
3.3 Volts
B=
2.7 Volts
T = Tristate
(Enable/Disable
P = Power Down
24.8920MHz EQXOPL-2050UDTA
Frequency = 24.8920MHz, EQXOPL-2000 package,
±50ppm -20°~+70°C, Tristate, supply voltage 3.3 Volts
* The frequency stability parameter is an inclusive figure and includes
adjustment tolerance at 25°C, stability over operating temperature SYNCHRONOUS/ASYNCHRONOUS
range, variations due to load change ±10%, supply voltage change
By default oscillators with Enable/Disable or Power Down functions are
±10%, first year ageing, shock and vibration.
supplied ASYNCHRONOUS. If SYNCHRONOUS operation is required
append ‘SYNC’ to the part number
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 1460 230000 Fax: +44 1460 230001 email: [email protected] web: www.euroquartz.co.uk
Similar pages