K Series 150 Watt DC-DC Converters Input voltage ranges from 8…385 V DC 1or 2 outputs up to 48 V DC 4 kV AC I/O electric strength test voltage LGA • Rugged electrical and mechanical design • Fully isolated outputs • Operating ambient temperature range –40...71°C with convection cooling Selection chart Output 1 Uo nom Io nom [V DC] [A] 5.1 20 12 10 15 8 24 5 24 5 30 4 48 2.5 12 5 15 4 24 2.5 Output 2 Uo nom Io nom [V DC] [A] 12 5 15 4 24 2.5 Type Input voltage 8...35 V DC AK 1001-7R AK 1301-7R AK 1501-7R AK 1601-7R AK 2320-7R AK 2540-7R AK 2660-7R AK 2320-7R AK 2540-7R AK 2660-7R -9, D, V, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 Output 1 Uo nom Io nom [V DC] [A] 5.1 25 12 12 15 10 24 6 24 6 30 5 48 3 12 6 15 5 24 3 Output 2 Uo nom Io nom [V DC] [A] 12 6 15 5 24 3 Type Input voltage 14...70 V DC BK 1001-7R BK 1301-7R BK 1501-7R BK 1601-7R BK 2320-7R BK 2540-7R BK 2660-7R BK 2320-7R BK 2540-7R BK 2660-7R Type Input voltage 20...100 V DC FK 1001-7R FK 1301-7R FK 1501-7R FK 1601-7R FK 2320-7R FK 2540-7R FK 2660-7R FK 2320-7R FK 2540-7R FK 2660-7R www.power-one.ch Options Options -9, D, V, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 -9, D, P, T, B1 1 Cassette Style Output 1 Uo nom Io nom [V DC] [A] 5.1 25 12 12 15 10 24 6 24 6 30 5 48 3 12 6 15 5 24 3 Output 2 Uo nom Io nom [V DC] [A] 12 6 15 5 24 3 K Series Type Input voltage 28...140 V DC CK 1001-7R CK 1301-7R CK 1501-7R CK 1601-7R CK 2320-7R CK 2540-7R CK 2660-7R CK 2320-7R CK 2540-7R CK 2660-7R Type Input voltage 44...220 V DC DK 1001-7R DK 1301-7R DK 1501-7R DK 1601-7R DK 2320-7R DK 2540-7R DK 2660-7R DK 2320-7R DK 2540-7R DK 2660-7R Type Input voltage 67...385 V DC EK 1301-7R EK 1501-7R EK 1601-7R EK 2320-7R EK 2540-7R EK 2660-7R EK 2320-7R EK 2540-7R EK 2660-7R Options -9, E, D, V, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 Input Input voltage Inrush current limitation 6 wide-input ranges (1:5) CK, DK, EK by thermistor refer to selection chart Output Efficiency Output voltage setting accuracy Output voltage switching noise Line regulation Load regulation Minimum load Current limitation Operation in parallel Hold-up time Ui nom, Io nom up to 87% Ui nom, Io nom ±0.6% Uo nom IEC/EN 61204, total typ. 100 mVpp Ui min...Ui max, Io nom typ. ±0.3% Ui nom, 10...100% Io nom, symmetrical output load typ. 0.4% not required 0A rectangular U/I characteristic typ. 110% Io nom by current limitation Ui nom, Io nom, C/D/E/FK with ext. diode in input line 4...30 ms Ui nom, Io nom, A/BK with ext. diode in input line typ. 1 ms Control and protection Input reverse polarity Input undervoltage lockout Input overvoltage lockout Input transient protection Output Output overvoltage Overtemperature Output voltage adjustment Inhibit Status indication built-in fuse, not user accessible typ. 80% Ui min typ. 108% Ui max varistor or suppressor diode no-load, overload and short circuit proof suppressor diode in each output switch-off with auto restart typ. 130% Uo nom TC typ 100°C 0...110% Uo nom TTL input, output(s) disabled if left open LEDs: OK, inhibit, overload Safety Approvals Protection degree Class of equipment Electric strength test voltage www.power-one.ch EN 60950, UL 1950, CSA 22.2 No. 950 I/case I/O O/case O/O IP 30 class I 2 kV AC 4 kV AC 1 kV AC 0.1 kV AC 2 K Series 150 Watt DC-DC Converters EMC Electrostatic discharge Electromagnetic field Electr. fast transients/bursts Surge Conducted disturbances Electromagnetic emissions IEC/EN 61000-4-2, level 4 (8/15 kV) IEC/EN 61000-4-3, level x (20 V/m) IEC/EN 61000-4-4, level 4 (2/4 kV) IEC/EN 61000-4-5, level 3 (2 kV) IEC/EN 61000-4-6, level 3 (10 V) CISPR 22/EN 55022, conducted criterion A criterion A criterion A criterion A criterion A class B Environmental Operating ambient temperature Operating case temperature TC Storage temperature Damp heat Vibration, sinusoidal Shock Bump Random vibration MTBF Ui nom, Io nom, convection cooled Ui nom, Io nom non operational IEC/EN 60068-2-3, 93%, 40°C IEC/EN 60068-2-6, 10...60/60...2000 Hz IEC/EN 60068-2-27, 6 ms IEC/EN 60068-2-29, 6 ms IEC/EN 60068-2-64, 20...500 Hz MIL-HDBK-217F, GB, 40°C –25...71°C –25...95°C –40...100°C 56 days 0.35 mm/5 gn 100 gn 40 gn 4.9 gn rms 500'000 h Options Extended temperature range –40...71°C, ambient, operating Electronic inrush current limitation Output voltage adjustment 40...110% Uo nom, excludes feature R and vice versa Input and/or output undervoltage monitoring, excludes option V Input and/or output undervoltage monitoring (VME), excludes option P Current sharing Cooling plate -9 E P D0…D9 V0, V2, V3 T B1 Pin allocation Pin 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 AK 1000, BK...EK 1001 Vo1+ Output 1 AK 2000 Vo2+ Output 2 Vo1– Output 1 Vo2– Output 2 S+ S– R i D V T Vo1+ Vo1– R i D Output 1 Output 1 Control of Uo1 Inhibit Safe data T Vi+ Sense Sense Control of Uo1 Inhibit Save data ACFAIL Current sharing Protective earth Input Vi– Input Vi– Current sharing T Protective earth Input Vi+ Vi+ Input Vi– Vi– www.power-one.ch Vi+ BK…EK 1301/1501/1601 Vo1+ Output 1 Vo1+ Vo1– Output 1 Vo1– S+ Sense S– Sense R Control of Uo1 i Inhibit D Save data BK…EK 2000 Vo2+ Output 2 Vo2+ Vo2– Output 2 Vo2– Vo1+ Output 1 Vo1– Output 1 R Control of Uo1 i Inhibit D Save data Current sharing T Protective earth Input Vi+ Vi+ Input Vi– Vi– Current sharing Protective earth Input Input 3 Cassette Style K Series Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. 159 (6.25") 7 TE 9 TE Test jacks Option P (Uo) Option D (Uto) Option D (Uti) 111 (3U) (4.37") 6.5 (0.26") 89 (3.50") 4.5 (0.18") Measuring point of case temperature TC 50 (1.97") European Projection LED i LED OK LED IoL 171.93 (6.77") (DIN 41494) 80 (3.15") 168.5 (6.63") S09002 Accessories Front panels 19" (Schroff/Intermas) Mating H15/H15S4 connectors with screw, solder, fast-on or press-fit terminals Connector retention facilities and code key system for connector coding Chassis or wall mounting plates for frontal access Universal mounting brackets for chassis or DIN-rail mounting Pin allocation S10010 S10010 Connector type H15 Connector type H15 S4 30 26 22 18 14 10 6 26/28 22 18 14 10/8 32 28 24 20 16 12 8 www.power-one.ch 4 32/30 24 20 16 12 4/6 4