Low Capacitance ESD Protection for High-Speed Serial Interfaces CM1263-02SE Features Applications • • • • • • 2 channels of ESD protection 0.85 pF loading capacitance per channel typical Provides ESD protection to IEC61000-4-2 Level 4: • ±8kV contact discharge • ±15kV air discharge RoHS compliant, lead-free finish 5-pin SOT-553 package • • • • LCD and camera data lines in wireless handsets that use high-speed serial interfaces such as MDDI, MIPI, MVI and MPL I/O port protection for mobile handsets, notebook computers, PDAs etc. Wireless handsets Handheld PCs/PDAs LCD and camera modules Electrical Schematic/Packaging 5 4 Par t Marking 1 2 3 PIN DESCRIPTIONS Pin DESCRIPTION 1 VP 2 VN 3 NC 4 (CH1) ESD Channel #1 5 (CH2) ESD Channel #2 ©2010 SCILLC. All rights reserved. April 2010 Rev. 2 Publication Order Number: CM1263-02SE/D CM1263-02SE Ordering Information PART NUMBERING INFORMATION PIN PACKAGE LEAD-FREE FINISH Part Marking 5 SOT-553 CM1263-02SE L63 Note 1: Parts are shipped in Tape and Reel form unless otherwise specified. Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER RATING UNITS 6.0 V Operating Temperature Range -40 to +85 °C Storage Temperature Range -65 to +150 °C (VN - 0.5) to (VP + 0.5) V Operating Supply Voltage (VP - VN) DC Voltage at any channel input Rev. 2 | Page 2 of 6 | www.onsemi.com CM1263-02SE ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1) SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS 3.3 5.5 V 8.0 µA 0.80 0.80 0.95 0.95 V V 0.1 1.0 µA 1.2 pF VP Operating Supply Voltage (VP-VN) IP Operating Supply Current (VP-VN)=3.3V VF Diode Forward Voltage Top Diode Bottom Diode IF=8mA; TA=25°C ILEAK Channel Leakage Current TA=25°C; VP=5V, VN=0V, VTEST=0 to 5V CIN Channel Input Capacitance At 1 MHz, VP=3.3V, VN=0V, VIN=1.65V 0.85 ∆C Channel Input Capacitance Matching At 1 MHz, VP=3.3V, VN=0V, VIN=1.65V 0.02 VESD ESD Protection Peak Discharge Voltage at any channel input, in system: a) Contact discharge per IEC 61000-4-2 standard and b) Air discharge per IEC 61000-4-2 standard IN VCL RDYN 0.60 0.60 pF TA=25°C; Notes 2 and 3 ±8 kV TA=25°C; Note 3 ±15 kV Channel Clamp Voltage Positive Transients Negative Transients TA=25°C, IPP = 1A, tP = 8/20µS; Note 3 Dynamic Resistance Positive Transients Negative Transients IPP = 1A, tP = 8/20µS Any I/O pin to Ground; Note 3 Note 1: All parameters specified at TA = –40°C to +85°C unless otherwise noted. Note 2: Standard IEC 61000-4-2 with CDischarge = 150pF, RDischarge = 330Ω, VP = 3.3V, VN grounded. Note 3: These measurements performed with no external capacitor on VP (VP floating). Rev. 2 | Page 3 of 6 | www.onsemi.com +9.96 –1.6 V V 0.96 0.5 Ω Ω CM1263-02SE Mechanical Details SOT-553 Mechanical Specifications, 5 pin The CM1263-02SE is supplied in a 5-pin SOT-553 package. Dimensions are presented below. PACKAGE DIMENSIONS TOP VIEW Package SOT-553 Leads 5 D 0.20 D e1 Millimeters Dim. Inches 5 Min Nom Max Min Nom Max A 0.50 0.55 0.60 0.020 0.022 0.024 b 0.17 0.22 0.27 0.007 0.009 0.011 4 E1 E 2X 0.20 CD 1 2 e c 0.08 0.18 0.003 1.60 BSC D E 0.13 1.50 1.60 0.005 0.007 0.063 BSC 1.70 0.060 0.063 3 0.20 b 2X SIDE VIEW A 0.067 E1 1.20 BSC 0.047 BSC e 0.50 BSC 0.020 BSC e1 1.00 BSC 0.040 BSC L 0.20 BSC 0.008 BSC # per tape and reel C A-B 2X 0.10 C SEAT ING PLANE C END VIEW c 5000 pieces L Controlling dimension: millimeters Package Dimensions for SOT-553 Rev. 2 | Page 4 of 6 | www.onsemi.com c CM1263-02SE Tape and Reel Specifications PART NUMBER PACKAGE SIZE (mm) POCKET SIZE (mm) B0 X A0 X K0 TAPE WIDTH W REEL DIAMETER QTY PER REEL P0 P1 CM1263-02SE 1.60 X 1.60 X 0.55 1.78 X 1.78 X 0.69 8mm 178mm (7") 5000 4mm 4mm Rev. 2 | Page 5 of 6 | www.onsemi.com CM1263-02SE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: FULFILLMENT Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: Phone 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: Fax 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: Email [email protected] N. American Technical Support: Support 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 Rev. 2 | Page 6 of 6 | www.onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative