CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458 Data Sheet 0.9MHz Single and Dual, High Gain Operational Amplifiers for Military, Industrial and Commercial Applications September 1998 File Number 531.4 Features • Input Bias Current . . . . . . . . . . . . . . . . . . . . 500nA (Max) • Input Offset Current . . . . . . . . . . . . . . . . . . . 200nA (Max) The CA1458, CA1558 (dual types); CA741C, CA741 (single types); high-gain operational amplifiers for use in military, industrial, and commercial applications. These monolithic silicon integrated circuit devices provide output short circuit protection and latch-free operation. These types also feature wide common mode and differential mode signal ranges and have low offset voltage nulling capability when used with an appropriately valued potentiometer. A 10kΩ potentiometer is used for offset nulling types CA741C, CA741 (see Figure 1). Types CA1458, CA1558 have no specific terminals for offset nulling. Each type consists of a differential input amplifier that effectively drives a gain and level shifting stage having a complementary emitter follower output. Applications • Comparator • Multivibrator • DC Amplifier • Summing Amplifier • Integrator or Differentiator • Narrow Band or Band Pass Filter Ordering Information PART NUMBER TEMP. RANGE (oC) PACKAGE PKG. NO. The manufacturing process make it possible to produce IC operational amplifiers with low burst “popcorn’’ noise characteristics. CA0741E CA1458E 0 to 70 8 Ld PDIP E8.3 Technical Data on LM Branded types is identical to the corresponding CA Branded types. CA1558E -55 to 125 8 Ld PDIP E8.3 CA0741T -55 to 125 8 Pin Metal Can T8.C 0 to 70 8 Pin Metal Can T8.C CA1558T -55 to 125 8 Pin Metal Can T8.C LM741N -55 to 125 8 Ld PDIP E8.3 LM741CN 0 to 70 8 Ld PDIP E8.3 LM1458N 0 to 70 8 Ld PDIP E8.3 -55 to 125 8 Ld PDIP E8.3 0 to 70 8 Ld PDIP E8.3 CA0741CE CA0741CT Pinouts CA741, CA741C (CAN) TOP VIEW CA1558 (METAL CAN) TOP VIEW NC V+ 7 - 2 6 + INV. INPUT (A) OUT OFFSET NULL 5 3 NON-INV. INPUT OUTPUT (A) V+ 4 1 A 2 1 + 6 INV. INPUT (B) 5 NON-INV. INPUT (B) 4 V- V- CA741, CA741C, LM741, LM741C (PDIP) TOP VIEW OFFSET NULL B + 3 NON-INV. INPUT (A) OUTPUT (B) 7 - 1 - OFFSET NULL INV. INPUT 8 8 8 CA1458, CA1558, LM1458 (PDIP) TOP VIEW OUTPUT (A) NC 1 8 V+ 7 OUTPUT (B) A INV. INPUT 2 NON-INV. INPUT 3 V- 4 + 1 7 INV. INPUT (A) V+ 2 B 6 OUTPUT 5 OFFSET NULL NON-INV. INPUT (A) 3 6 INV. INPUT (B) V- 4 5 NON-INV. INPUT (B) CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999 CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458 Absolute Maximum Ratings Thermal Information Supply Voltage CA741C, CA1458, LM741C, LM1458 (Note 1) . . . . . . . . . . . 36V CA741, CA1558, LM741 (Note 1) . . . . . . . . . . . . . . . . . . . . . 44V Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±VSUPPLY Offset Terminal to V- Terminal Voltage (CA741C, CA741) . . . . ±0.5V Output Short Circuit Duration. . . . . . . . . . . . . . . . . . . . . . . Indefinite Thermal Resistance (Typical, Note 3) θJA (oC/W) θJC (oC/W) PDIP Package . . . . . . . . . . . . . . . . . . . 130 N/A Can Package . . . . . . . . . . . . . . . . . . . . 155 67 Maximum Junction Temperature (Can Package) . . . . . . . . . . 175oC Maximum Junction Temperature (Plastic Package) . . . . . . . . 150oC Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC Operating Conditions Temperature Range CA741, CA1558, LM741 . . . . . . . . . . . . . . . . . . . -55oC to 125oC CA741C, CA1458, LM741C, LM1458 (Note 2) . . . . 0oC to 70oC CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTES: 1. Values apply for each section of the dual amplifiers. 2. All types in any package style can be operated over the temperature range of -55oC to 125oC, although the published limits for certain electrical specification apply only over the temperature range of 0oC to 70oC. 3. θJA is measured with the component mounted on an evaluation PC board in free air. Typical Values Intended Only for Design Guidance, VSUPPLY = ±15V Electrical Specifications PARAMETER SYMBOL Input Capacitance TEST CONDITIONS TYPICAL VALUE (ALL TYPES) UNITS 1.4 pF ±15 mV 75 Ω 25 mA 0.3 µs 5.0 % CI Offset Voltage Adjustment Range Output Resistance RO Output Short Circuit Current Transient Response Rise Time tr Overshoot O.S. Unity Gain, VI = 20mV, RL = 2kΩ, CL ≤ 100pF Slew Rate (Closed Loop) SR RL ≥ 2kΩ 0.5 V/µs Gain Bandwidth Product GBWP RL = 12kΩ 0.9 MHz For Equipment Design, VSUPPLY = ±15V Electrical Specifications TEST CONDITIONS PARAMETER RS ≤ 10kΩ Input Offset Voltage Input Common Mode Voltage Range RS ≤ 10kΩ Common Mode Rejection Ratio RS ≤ 10kΩ Power Supply Rejection Ratio Input Resistance 2 (NOTE 4) CA741, CA1558, LM741 (NOTE 4) CA741C, CA1458, LM741C, LM1458 TEMP (oC) MIN TYP MAX MIN TYP MAX UNITS 25 - 1 5 - 2 6 mV Full - 1 6 - - 7.5 mV 25 - - - ±12 ±13 - V Full ±12 ±13 - - - - V 25 - - - 70 90 - dB Full 70 90 - - - - dB 25 - - - - 30 150 µV/V Full - 30 150 - - - µV/V 25 0.3 2 - 0.3 2 - MΩ CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458 For Equipment Design, VSUPPLY = ±15V (Continued) Electrical Specifications TEST CONDITIONS PARAMETER TEMP (oC) MIN TYP MAX MIN TYP MAX UNITS 25 - 80 500 - 80 500 nA Full - - - - - 800 nA -55 - 300 1500 - - - nA 125 - 30 500 - - - nA 25 - 20 200 - 20 200 nA Full - - - - - 300 nA -55 - 85 500 - - - nA 125 - 7 200 - - - nA 25 50,000 200,000 - 20,000 200,000 - V/V Full 25,000 - - 15,000 - - V/V 25 - - - ±12 ±14 - V Full ±12 ±14 - - - - V 25 - - - ±10 ±13 - V Full ±10 ±13 - ±10 ±13 - V 25 - 1.7 2.8 - 1.7 2.8 mA -55 - 2 3.3 - - - mA 125 - 1.5 2.5 - - - mA 25 - 50 85 - 50 85 mW -55 - 60 100 - - - mW 125 - 45 75 - - - mW Input Bias Current Input Offset Current RL ≥ 2kΩ, VO = ±10V Large Signal Voltage Gain RL ≥ 10kΩ Output Voltage Swing (NOTE 4) CA741C, CA1458, LM741C, LM1458 (NOTE 4) CA741, CA1558, LM741 RL ≥ 2kΩ Supply Current Device Power Dissipation NOTE: 4. Values apply for each section of the dual amplifiers. Test Circuits INVERTING INPUT 2 - NON-INVERTING INPUT 3 + 6 OUTPUT VOUT + 5 OFFSET 1 10kΩ NULL CL RL VIN V- FIGURE 1. OFFSET VOLTAGE NULL CIRCUIT FOR CA741C, CA741, LM741C, AND LM741 3 FIGURE 2. TRANSIENT RESPONSE TEST CIRCUIT FOR ALL TYPES CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458 Schematic Diagram (Notes 5, 6) CA741C, CA741, LM741C, LM741 AND FOR EACH AMPLIFIER OF THE CA1458, CA1558, AND LM1458 D1 OUTPUT * V- * R7 4.5K Q13 Q12 Q1 * R5 39K Q2 R9 25 Q11 D4 Q3 R8 7.5K Q4 Q8 R10 50 Q15 Q6 OFFSET NULL * Q10 C1 30pF NON-INVERTING INPUT V+ D2 Q5 INVERTING INPUT * Q16 Q9 Q7 Q14 * * Q17 D3 R1 1K R3 50K R4 3K R2 1K R12 50K R11 80K NOTES: 5. See Pinouts for Terminal Numbers of Respective Types. 6. All Resistance Values are in Ohms. Typical Performance Curves 40 TA = 25oC RL ≥ 2kΩ 35 15 OUTPUT SWING (VP-P) COMMON MODE INPUT RANGE (V) TA = 25oC 10 5 30 25 20 15 10 5 0 0 0 5 10 15 20 DC SUPPLY (V+, V-) FIGURE 3. COMMON MODE INPUT VOLTAGE RANGE vs SUPPLY VOLTAGE FOR ALL TYPES 4 0 5 10 15 20 DC SUPPLY (V+, V-) FIGURE 4. OUTPUT VOLTAGE vs SUPPLY VOLTAGE FOR ALL TYPES CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458 Typical Performance Curves (Continued) 30 DC SUPPLY VOLTS (V+ = 15, V- = -15) TA = 25oC, CL = 100pF 25 OUTPUT (mV) 20 90% 15 20 5 10% RISE TIME 0 -0.5 0 -0.5 1.0 1.5 TIME (µs) 2.0 2.5 3.0 FIGURE 5. TRANSIENT RESPONSE FOR CA741C AND CA741 Metallization Mask Layout CA741CH 0 10 20 30 40 50 60 64 57 50 40 30 54 - 62 (1.372 - 1.575) 20 10 0 4 - 10 (0.102 - 0.254) 61 - 69 (1.549 - 1.753) CA1458H 0 10 20 30 40 50 60 70 80 90 104 100 55 50 40 30 52 - 60 (1.321 - 1.524) 20 10 0 4 - 10 (0.102 - 0.254) 101 - 109 (2.565 - 2.768) NOTE: Dimensions in parentheses are in millimeters and are derived from the basic inch dimensions as indicated. Grid graduations are in mils (103 inch). 5 CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458 All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 6 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029