Spec Sheet CERAMIC CAPACITORS High Value Multilayer Ceramic Capacitors (High dielectric type) LMK063BJ223MP-F Features Item Summary 10V, X5R, 0.022μF, ±20%, 0201 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping paper 15000pcs Products characteristics table External Dimensions 0201/0603 L 0.6mm ±0.03 Rated Voltage (max) 10V W 0.3mm ±0.03 Capacitance 0.022μF T 0.3mm ±0.03 e 0.15mm ±0.05 CaseSize (EIA/JIS) Capacitance Tolerance ±20% Resistance 10,000 MΩ min. Dielectric Loss Tangent 7.5%MAX Temperature Characteristics (EIA/JIS) X5R/B Temperature Range (EIA/JIS) -55 to +85℃/-25 to +85℃ Capacitance Change (EIA/JIS) ±15/±10% RoHS Compliance Yes Halogen Free Yes Soldering Method Reflow 2014.11.20 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Multi Layer Ceramic Capacitor -Electrical Characteristics Data- 13SA05 RoHS compliance product ○LMK063BJ223MP 10V 0603 B/X5R 0.022uF +/- 20% t=0.33mmMAX 10V 0201 B/X5R 0.022uF +/- 20% t=0.013inchMAX LMK063BJ223MP DC Bias Char. 10 LMK063BJ223MP Capacitance Freq. 1 0 Capacitance[uF] dC/C[%] -10 -20 -30 0.1 0.01 -40 -50 0 2 4 6 DC Bias Voltage[V] 8 10 LMK063BJ223MP Capacitance Temp. 0.001 0.001 0.01 10000 Z,ESR[OHM] dC/C[%] -10 -20 1000 ESR Z 1000 0 100 LMK063BJ223MP Impedance,ESR Freq. 100000 10 0.1 1 10 Frequency[MHz] 100 10 1 0.1 0.01 -30 -55 -35 -15 5 25 45 Temperature[degreeC] 65 85 0.001 0.001 0.01 0.1 1 10 Frequency[MHz] 100 1000 部品特性は設置環境、測定条件等により変化する場合があります。本データをご使用される際は実際の製品特性に対する参考 データとしてご活用ください。また、本データは予告無く追加・削除及び変更を行う場合があります。ご注文の際は、納入仕様書の ご確認をお願いします。 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification