March 6, 2007 SMD INDUCTOR DR353-6 SERIES Features z z z z z Low Profile Surface Mount Design Flat Top for Pick and Place Inductance Range from 0.12µH to 100.0µH Operating Temp. -25°C to + 85°C Tinned Leads with Leaded Solder is Available (note 6) ELECTRICAL SPECIFICATIONS AT 25ºC Part No. Inductance (µH) DR353-6-121 DR353-6-221 DR353-6-471 DR353-6-102 DR353-6-222 DR353-6-472 DR353-6-103 DR353-6-223 DR353-6-473 DR353-6-104 @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz 0.12±20% 0.22±20% 0.47±20% 1.0±20% 2.2±20% 4.7±20% 10±10% 22±10% 47±10% 100±10% MECHANICAL OUTLINES 3.2 DCR (Ω) Max. 0.112 0.140 0.210 0.364 0.533 0.845 1.690 3.900 10.40 15.60 I rated (mA) Max. 970 850 700 510 430 340 230 160 100 80 SRF (MHz) Min. 250 250 180 100 50 31 20 14 10 7 0.3 1.5 1.0 1.5 353-6 XXX 1.5 TOP VIEW PCB SOLDER PAD LAYOUT (REF.) 1.8 0.3 1 FRONT VIEW 0.7 Min. 0.7 Min. 0.7 Min. 2 SCHEMATIC 1.6 0.2 BOTTOM VIEW Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.2mm, unless other specified 3. Irated for an approximate 40°C temperature rise 4. Irated for an approximate 20% drop maximum of the initial value 5. Tape and reel quantity, 2000 pcs/reel 6. For non-RoHS parts replace DR prefix with 42- (e.g. DR353-6 becomes 42-353-6) 7. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C. DATATRONIC: 28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.