SAW filters for infrastructure systems Series/Type: B3883 The following products presented in this data sheet are being withdrawn. Ordering Code B39171B3883Z710 Substitute Product Date of Withdrawal 2012-01-13 Deadline Last Orders Last Shipments 2012-12-31 2013-03-30 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B3883 Low-Loss Filter 168,96 MHz Data Sheet Ceramic package QCC10B Features ● ● ● ● Low-loss IF filter Multichannel CDMA2000 & W-CDMA capable Balanced operation possible Hermetically sealed ceramic SMD package Terminals ● Gold plated Dimensions in mm, approx. weight 0,23 g Pin configuration 10 9 5 4 2, 7 1, 3, 6, 8 Type B3883 Input Input ground Output Output ground or balanced output Ground To be grounded Ordering code B39171-B3883-Z710 Marking and Package Packing according to according to C61157-A7-A49 F61074-V8172-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps -40/ +85 -40/ +85 5 10 2 ˚C ˚C V dBm Jun 25, 2004 SAW Components B3883 Low-Loss Filter 168,96 MHz Data Sheet Characteristics Operating temperature: T = 0 .. +85 ˚C Terminating source impedance: ZS=50 Ω single ended and matching network. Terminating load impedance: ZS=75 Ω balanced and matching network. min. typ. max. Nominal frequency fN — 168,96 — Minimum insertion attenuation (including matching network) αmin — 8,0 9,5 dB B1dB B5dB B30dB — — — 14,5 18,5 19,5 — — — MHz MHz MHz — 1,5 2,0 dB — 70 100 ns — — — — 1,2 1,6 1,0 1,3 2,0 2,0 2,0 2,0 ˚ ˚ ˚ ˚ Average Error Vector Magnitude EVM fN − 5,0 MHz ± 1,92 MHz fN ± 1,92 MHz fN + 5,0 MHz ± 1,92 MHz fN + k∗1,25 MHz ± 0,6144 MHz — — — — 3,0 3,8 3,2 3,3 4,0 4,5 4,0 4,0 % % % % Relative attenuation (relative to αmin) fN −17,5 MHz ... fN − 66,0 fN + 17,5 MHz ... fN + 19,5 fN + 19,5 MHz ... fN + 23,5 fN + 23,5 MHz ... fN + 66,0 40 39 33 40 43 42 43 44 — — — — dB dB dB dB — -87 — ppm/K MHz Passband width αrel ≤ 1 dB αrel ≤ 5 dB αrel ≤ 30 dB ∆α Amplitude ripple (p-p) fN ± 6,95 MHz ∆τ Group delay ripple (p-p) fN ± 6,95 MHz ∆ϕ Phase Linearity1) (rms) fN − 5,0 MHz ± 1,92 MHz fN ± 1,92 MHz fN + 5,0 MHz ± 1,92 MHz fN + k∗1,25 MHz ± 0,6144 MHz αrel MHz MHz MHz MHz TCf Temperature coefficient of frequency 1) Phase Linearity: where k = (-5, -4 .... +5) 3 Jun 25, 2004 SAW Components B3883 Low-Loss Filter 168,96 MHz Data Sheet Matching network (Element values depend upon PCB layout): Ls1 Ls3 Lp2 Ls4 Ls1 = 180 nH Lp2 = 390 nH Ls3 = 82 nH Ls4 = 82 nH 4 Jun 25, 2004 1:1 SAW Components B3883 Low-Loss Filter 168,96 MHz Data Sheet Normalized frequency response Normalized frequency response (pass band) 5 Jun 25, 2004 SAW Components B3883 Low-Loss Filter 168,96 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC PD P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2004. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 6 Jun 25, 2004