RoHS APC40 Axial Power Chokes Dimensions: Inches (mm) 20 AWG 1.00 (25.4) 1.15 NOMINAL (29) Allied Part Number Inductance (µh) Tolerance (%) APC40-3R9K-RC APC40-4R7K-RC APC40-5R6K-RC APC40-6R8K-RC APC40-8R2K-RC APC40-100K-RC APC40-120K-RC APC40-150K-RC APC40-180K-RC APC40-220K-RC APC40-270K-RC APC40-330K-RC APC40-390K-RC APC40-470K-RC APC40-560K-RC APC40-680K-RC APC40-820K-RC APC40-101K-RC APC40-121K-RC APC40-151K-RC APC40-181K-RC APC40-221K-RC APC40-271K-RC APC40-331K-RC APC40-391K-RC APC40-471K-RC APC40-561K-RC APC40-681K-RC APC40-821K-RC APC40-102K-RC APC40-122K-RC APC40-152K-RC APC40-182K-RC APC40-222K-RC APC40-272K-RC APC40-332K-RC APC40-392K-RC APC40-472K-RC APC40-562K-RC APC40-682K-RC APC40-822K-RC APC40-103K-RC APC40-123K-RC APC40-153K-RC APC40-183K-RC APC40-223K-RC APC40-273K-RC APC40-333K-RC APC40-393K-RC APC40-473K-RC APC40-563K-RC APC40-683K-RC APC40-823K-RC APC40-104K-RC APC40-124K-RC APC40-154K-RC 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 22000 27000 33000 39000 47000 56000 68000 82000 100000 120000 150000 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 DCR Max. (Ω) .007 .008 .009 .010 .011 .012 .013 .014 .015 .016 .017 .021 .023 .025 .028 .039 .043 .055 .076 .084 .096 .108 .151 .168 .182 .202 .348 .470 .500 .570 .648 .888 1.16 1.20 1.44 1.92 2.16 2.50 3.20 4.00 5.20 6.00 8.00 10.0 11.0 13.0 15.0 21.0 23.2 32.0 35.0 48.0 54.3 68.5 75.0 84.3 Saturation Current (A) 47.0 42.0 35.0 29.0 24.0 19.0 16.0 14.8 13.4 12.4 11.2 10.2 9.30 8.70 8.00 7.00 6.30 5.70 5.30 4.70 4.30 4.00 3.60 3.20 2.90 2.60 2.40 2.20 2.00 1.80 1.70 1.55 1.40 1.25 1.10 1.00 0.90 0.85 0.78 0.70 0.65 0.60 0.54 0.48 0.46 0.39 0.355 0.33 0.30 0.27 0.175 0.145 0.12 0.10 0.08 0.06 1.15 NOMINAL (29) Rated Current (A) 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 4.70 4.70 3.80 3.00 3.00 3.00 3.00 2.30 2.30 2.30 2.30 1.40 1.20 1.20 1.20 1.20 0.90 0.75 0.75 0.75 0.59 0.59 0.59 0.45 0.45 0.35 0.35 0.27 .200 .200 .200 .200 .160 .160 .120 .120 .095 .095 .070 .070 .070 0.55 (13.98) Features • Axial pre-tinned leads. • Protected with UL shrink tubing. • Non standard values and tolerances available. • High saturation core material used for high inductance and low DCR. Electrical Inductance: Measured at 1KHz with no DC current. Tolerance: 10% over entire inductance range. Available in tighter tolerances. Current Rating: Based on Inductance drop of less than 10% of initial value and a temperature rise of not more than 30ºC from initial value within the coil body. Operating Temp: -55ºC to + 125ºC Test Procedures: L measured on HP4263B @ 1KHz Physical Packaging: 100 pieces per tape and reel. 25 pieces per bag Marking: EIA Inductance Code. For Tape and Reel packaging please add ”-TR” to the part number. All specifications subject to change without notice. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL 02/04/14 www.alliedcomponents.com