1 D Description Body Socket Insulation Washer Nut 2 Material Brass BE CU Teflon Brass Brass 3 Finish Nickel Gold Teflon Nickel Nickel 4 TOP VIEW 0.040 (1.02) MOUNTING METHODS D 0.050 (1.27) Use of nut optional 0.040 (1.02) SIDE VIEW C FLAT 0.228 (5.80) Clamps into molded case BACK VIEW ∅0.325 (8.30) ∅0.225 (5.80) 1/4-36UNS-2A THREADS 0.05 terminal (1.27) C 0.039 0.179 (1.00) (4.54) Clamps into molded case 0.04 (1.02) 0.067±0.002 (1.70±0.05) 0.04 (1.02) 0.175 (4.50) 0.375 (9.60) B 0.157 (4.00) 0.152 (3.90) Flange hides hole 0.240 (6.10) 0.375 (9.60) 0.786 (20.40) 0.311 (7.90) NUT Plastic/Metal Case WASHER B H8 RECOMMENDED FOOTPRINT 0.16 Ø0.402 (10.20) RECOMMENDED MOUNTING HOLE ∅0.254 (6.50) 0.06 0.234 (6.00) Title 0.10 1 0.020 (0.50) 0.065 (1.65) 0.10 A 2 Serves as rear flange 1/4-36UNS-2B THREADS SMA FEMALE EDGE MULTI-MOUNT FOR 0.062" THICK BOARD Part No. CONSMA006.062 Revision: 1.0 Dimensions: Date: INCHES (mm) 5/29/2007 3 A CONNECTOR CITY 159 ORT LANE MERLIN, OR 97532 PH (541)-471-6256 FAX (541)-471-6251 Sheet 1 of 1 4