BZG04 Series Transient Voltage Suppressor BREAKDOWN VOLTAGE: 8.2 --- 220 V PEAK PULSE POWER: 300 W Features DO-214AC(SMA) 1.5± 0.1 2.6± 0.15 4.5± 0.1 5.1± 0.2 2.1± 0.2 1.3± 0.2 Mechanical Data Case:JEDEC DO-214AC molded plastic over passivated chip Terminals: solder plated, solderable per MIL-STD-750, method 2026 0.2± 0.05 0.203MAX Plastic package has underwriters laboratory flammability classification 94V-0 Optimized for LAN protection applications Low profile package with built-in strain relief for surface mounted applications Glass passivated junction Low incremental surge resistance, excellent clamping capability 300W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% Very fast response time High temperature soldering guaranteed: 250°C/10 seconds at terminals Dimensions in millimeters Mounting position: any Weight: 0.002 ounces, 0.064 grams Devices for Bidirectional Applications For bi-directional devices, use suffix C (e.g. BZG04-10C). Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Non-repetitive peak reverse power dissipation 10/1000s SYMBOL VALUE UNIT PRSM 300 W exponential pulse(see Fig.3); Tj=25℃prior tosurge; see also Fig.1 RθJA Typical thermal resistance, junction to ambient 100(NOTE1) 150(NOTE2) Forward voltage VF @IF=0.5A; seeFig.2 1.2 Operating junction temperature range RθJL -55---+175 Operating storage temperature range TJ -55---+175 NOTES: (1) Device mounted on an Al2O3 printed-circuit board, 0.7mm thick; thickness of Cu-layer ≥35m, see Fig.4. (2) Device mounted on an epoxy-glass printed-circuit board, 1.5mm thick; thickness of Cu-layer ≥40μm, see Fig.4. For more information please refer to the "General Part of associated Handbook". http://www.luguang.cn mail:[email protected] /W V BZG04 Series Transient Voltage Suppressor 2 -3 2 " Partnumber Reverse breakdown voltage V(BR)R at Itest V MIN. 4 5 2 25 657 2875 8 .533 12957, 35 3650 : 5; =8 >; 7502 1 Temperature coefficient . 1 ./ ? Reverse current at Test Clamping voltage reverse voltage current αz@Iz IZT V(CL)R %/℃ MIN. MAX. mA IR VR V MAX. at IRSM (note 1) A μA MAX. V BZG04-8V2 9.4 0.05 0.09 50 14.8 20.3 20 8.2 BZG04-9V1 10.4 0.05 0.10 50 15.7 19.1 5 9.1 BZG04-10 11.4 0.05 0.10 50 17 17.7 5 10 BZG04-11 12.4 0.05 0.10 50 18.9 15.9 5 11 BZG04-12 13.8 0.05 0.10 50 20.9 14.4 5 12 BZG04-13 15.3 0.06 0.11 25 22.9 13.1 5 13 BZG04-15 16.8 0.06 0.11 25 25.6 11.7 5 15 BZG04-16 18.8 0.06 0.11 25 28.4 10.6 5 16 BZG04-18 20.8 0.06 0.11 25 31.0 9.7 5 18 BZG04-20 22.8 0.06 0.11 25 33.8 8.9 5 20 BZG04-22 25.1 0.06 0.11 25 38.1 7.9 5 22 BZG04-24 28 0.06 0.11 25 42.2 7.1 5 24 BZG04-27 31 0.06 0.11 25 46.2 6.5 5 27 BZG04-30 34 0.06 0.11 10 50.1 6.0 5 30 BZG04-33 37 0.06 0.11 10 54.1 5.5 5 33 BZG04-36 40 0.07 0.12 10 60.7 4.9 5 36 BZG04-39 44 0.07 0.12 10 65.5 4.6 5 39 BZG04-43 48 0.07 0.12 10 70.8 4.2 5 43 BZG04-47 52 0.07 0.12 10 78.6 3.8 5 47 BZG04-51 58 0.08 0.13 10 86.5 3.5 5 51 BZG04-56 64 0.08 0.13 10 94.4 3.2 5 56 BZG04-62 70 0.08 0.13 10 103.5 2.9 5 62 BZG04-68 77 0.08 0.13 10 114 2.6 5 68 BZG04-75 85 0.09 0.13 5.0 126 2.4 5 75 BZG04-82 94 0.09 0.13 5.0 139 2.2 5 82 BZG04-91 104 0.09 0.13 5.0 152 2.0 5 91 BZG04-100 114 0.09 0.13 5.0 167 1.8 5 100 BZG04-110 124 0.09 0.13 5.0 185 1.6 5 110 BZG04-120 138 0.09 0.13 5.0 204 1.5 5 120 BZG04-130 153 0.09 0.13 5.0 224 1.3 5 130 BZG04-150 168 0.09 0.13 5.0 249 1.2 5 150 BZG04-160 188 0.09 0.13 5.0 276 1.1 5 160 BZG04-180 208 0.09 0.13 2.0 305 1.0 5 180 BZG04-200 228 0.09 0.13 2.0 336 0.9 5 200 BZG04-220 251 0.09 0.13 2.0 380 0.8 5 220 NOTES: 1.Non-repetitive peak reverse current in accordance with "IEC60-1, Section8" (10/1000s pulse); seeFig.3. http://www.luguang.cn mail:[email protected] BZG04 Series Transient Voltage Suppressor Ratings AND Charactieristic Curves Fig.1 Fig.2 Maximum non-repetitive peak reverse power dissipation as a function of pulse duration (square pulse). MBH453 3 handbook, halfpage MBH452 104 Forward current as a function of forward voltage; typical values. handbook, halfpage IF (A) PZSM (W) 2 103 1 102 0 0 10 10−2 Fig.3 10−1 1 tp (ms) 1 VF (V) 10 2 Tj = 25 °C prior to surge. Tj = 25 °C. Non-repetitive peak reverse current pulse definition. Fig.4 Printed-circuit board for surface mounting. IRSMhalfpage handbook, (%) 50 100 90 4.5 50 50 2.5 10 t t1 t2 In accordance with “IEC 60-1, Section 8”. t1 = 10 µs. t2 = 1000 µs. http://www.luguang.cn MGD521 1.25 Dimensions in mm. mail:[email protected] MSB213