C&K CG Series Single Pole Power Rocker Switches Features/Benefits Typical Applications • Bevelled frame • Illuminated versions available • Easy panel mount installation • • • • Computers and peripherals Small appliances Instrument panels Industrial controls Specifications Materials CONTACT RATING: UL/CSA: 16 AMPS @ 125 VAC, 10 AMPS @ 250 VAC. VDE µ T85: 10 AMPS @ 250 VAC, 6 AMPS @ 250 VAC. ELECTRICAL LIFE: 10,000 make and break cycles at full load. INSULATION RESISTANCE: 108 Ω min. DIELECTRIC STRENGTH: 1,500 VRMS @ sea level. HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish. ILLUMINATED ACTUATOR: Polycarbonate, matte finish. CENTER CONTACTS: Silver plated, copper alloy. END CONTACTS: Silver plated. ALL TERMINALS: Silver plated, copper alloy. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages 12 thru 14. For additional options not shown in catalog, consult Customer Service Center. Switch Function CG101 SPDT On-None-On CG102 SPST On-None-Off CG103 SPDT On-Off-On CG105 SPDT Mom-Off-Mom CG12 * SPST On-None-Off Actuator Actuator Color J1 Rocker 2 (STD). Black J2 **Two-tone rocker 1 White J3 Illuminated rocker 3 Red R Red, illuminated A Amber, illuminated G Green, illuminated Mounting Style/Color S2 (STD.) Snap-in, black S1 Snap-in, white Termination 05 (STD.) .250” quick connect 07 Solder lug Actuator Marking (NONE) (STD.) No marking D ON-OFF H ”O l” - international ON-OFF P ”O -” international ON-OFF * CG12 - for switches with both marking and illumination Contact Rating QF (STD.) Silver Lamp Rating (NONE) (STD.) No lamp 7 125 VAC neon 8 250 VAC neon ** J2 - refer to table on page 14 for actuator options Dimensions are shown: Inch (mm) Dimensions subject to change 12 www.ittcannon.com C&K CG Series Single Pole Power Rocker Switches SWITCH FUNCTION CONNECTED TERMINALS SWITCH FUNCTION NO. POLES C&K marking on opposite side C&K marking on opposite side MODEL NO. CG101 ON NONE ON CG102 ON NONE OFF CG103 ON OFF ON CG105 MOM OFF MOM CG12 * ON NONE OFF 2-3 SCHEMATIC N/A SP 2-1 OPEN OR For Illuminated Version * CG12 - for switches with both marking and illumination ACTUATOR J1 J3 J2 ROCKER TWO-TONE ROCKER ILLUMINATED ROCKER NOTE: J3 actuator available with CG102 switch function only. NOTE: Available with CG102 switch function only. Dimensions are shown: Inch (mm) Dimensions subject to change 13 www.ittcannon.com C&K CG Series Single Pole Power Rocker Switches ACTUATOR COLOR OPTION CODE 2 1 3 R A G OPTION CODE ACTUATOR COLOR ACTUATOR COLOR BOTTOM TOP (STD.) BLACK 1 2 3 4 5 WHITE RED RED, ILLUMINATED AMBER, ILLUMINATED GREEN, ILLUMINATED WHITE RED WHITE BLACK RED WHITE BLACK WHTE BLACK RED J2 actuator only MOUNTING STYLE/COLOR S2 S1 (STD.) SNAP-IN, BLACK SNAP-IN, WHITE PANEL MOUNTING PANEL THICKNESS 0.030-0.049 (0,75-1,25) 0.049-0.079 (1,25-2,0) 0.079-0.118 (2,0-3,0) “X” 1.087-.004 (27,6-0,1) 1.094-.004 (27,8-0,1) 1.102-.004 (28,0-0,1) “Y” 0.543+.004 (13,8+0,1) 0.543+.004 (13,8+0,1) 0.543+.004 (13,8+0,1) TERMINATION 05 (STD.) .250” QUICK CONNECT 07 SOLDER LUG .886 (22,5) 1 2 3 .031 (0,8) .366 (9,3) R .049 (1,2) .118 (3,0) .250 (6,3) R .039 (1,0) .535 (13,6) Dimensions are shown: Inch (mm) Dimensions subject to change 14 www.ittcannon.com C&K CG Series Single Pole Power Rocker Switches ACTUATOR MARKING NONE H (STD.) NO MARKING D ON-OFF P O- Ol NOTE: Orientation of actuator marking and terminals. CONTACT MATERIAL OPTION CODE QF (STD.) CONTACT AND TERMINAL MATERIAL SILVER RATINGS POWER 16 AMPS @ 125 VAC; 10 AMPS @ 250 VAC (UL/CSA) 10 AMPS @ 250 VAC (VDE) µ T85. LAMP RATING (NONE) (STD.) NO LAMP 7 125 VAC 33kΩ NEON 8 250 VAC 150kΩ NEON NOTE: Lamp rating for J3 actuator option. Dimensions are shown: Inch (mm) Dimensions subject to change 15 www.ittcannon.com