MOEH and MOEZ Series / Euro Package, 5 pin OCXO ¾ Oven Controlled Oscillator ¾ 1.0 MHz to150.0 MHz Available ¾ SC Crystal Option ¾ -40°C to 85° Available ¾ High Stability PART NUMBERING GUIDE: MOE H 12 S 100 B Output Type H = HCMOS Z = Sinewave Supply Voltage 3 = 3.3 Volt 5 = 5 Volt 12 = 12 Volt Crystal Cut Blank = AT Cut S = SC Cut Frequency Operating Temperature A = 0ºC to 50ºC B = -10ºC to 60ºC C = -20ºC to 70ºC D = -30ºC to 70ºC E = -30ºC to 80ºC F = -40ºC to 85ºC Frequency Stability 002 = ±2ppb 005 = ±5ppb 010 = ±10ppb 050 = ±50ppb 100 = ±100ppb ELECTRICAL SPECIFICATIONS: Frequency Range 1.0 MHz to 150.0MHz Frequency Stability ±2ppb to ±100ppb Operating Temperature -40°C to 85°C max* * All stabilities not available, please consult MMD for availablity. Storage Temperature -40°C to 95°C Sinewave ±3 dBm 50Ω Output 10% Vdd max HCMOS 30pF 90% Vdd min Supply Voltage (Vdd) 3.3V 5.0V 12.0V typ 540mA 360mA 150mA Supply Current max 1000mA 720mA 650mA Warm-up Time 5min. @ 25°C Input Impedance 100K Ohms typical Crystal AT or SC Cut options Phase Noise @ 10MHZ** SC AT 10 Hz Offset -110dBc -101dBc 100 Hz Offset -130dBc -111dBc 1000 Hz Offset -140dBc -134dBc 10K Hz Offset -155dBc -140dBc Voltage Control 0 to VCC ±3ppm typ. ±10ppm typ. Aging (after 30 days) ±0.1ppm/yr. ±1.0ppm/yr. MECHANICAL DETAILS: Pin Connections Pin 1 = Vc Pin 2 = Reference Voltage Pin 3 = Supply Voltage Pin 4 = Output Pin 5 = Ground MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomponents.com [email protected] Specifications subject to change without notice Revision: 02/23/07 C