SL Power MENB1121 Medical switch-mode power supply Datasheet

MENB1121
Universal Input 120 Watt Series
Medical Switch-Mode Power Supply
3 Year Warranty
•100-240VAC Universal Input
•Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
•Desktop Style
•12V to 24V Single Output Models, up to 120W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No Load Power Consumption <0.5W
rd
•Meets UL/EN/IEC60601-1, 3
Edition
RoHS
All Specifications are typical at nominal input, full load at 25C unless otherwise stated.
Specifications
AC Input
Input Current
100-240Vac, +/-10%, 47-63 Hz, 1
100 Vac: 2.2 A
Inrush Current
Input Fuse
60A peak @ 264Vac, cold start
3.15A, 250V Internal Primary Current Fuse provided
Efficiency
Meets International Efficiency Level V
MTBF
Hold-up Time
Overload Protection
Topology
See chart
Safety and EMC Approvals
Output Power
See chart
Dielectric Withstand
1% pk-pk max., 20MHz BW
Line/Load Regulation
Excluding Cord: Line: +/- 1%, Load: +/-5%
500μs max., 50% load step, typical
Transient Response
Minimum Load
Not required
Case Material
Case Dimensions
Black 94V0 Polycarbonate
212.4mm x 67.4mm x 45mm, see outline drawing
Hiccup Mode
Short Circuit Protection
Output Voltage
Ripple and Noise
100,000 hours calculated
18 ms min. @ 115Vac, 60 ms min. @ 230 Vac
Operating Temperature
Storage Temperature
Relative Humidity
Hiccup Mode
Switching – Fixed Frequency Flyback
EN/IEC/CSA/UL60601-1, 3rd Edition
EMC: See chart
Input-Output: 2xMOOP
Input-GND: 1 MOOP, Output-GND: 500Vdc
0 to 40C, no derating
-30 to +85C
5% to 95%, non-condensing
Altitude
Output Connections
Weight
0 to 10,000 ft
Cable: 18AWG, 1,200mm, 4 conductor
Connector: #51, 6-pin Molex
700g
EMI/EMC Compliance
Conducted Emissions
FCC Part 15, Class B, EN55011 Class B, EN55024
Radiated Emissions
FCC Part 15, Class B, EN55011 Class B, EN55024
Voltage Fluctuations
EN61000-3-3, Line Flicker
Static Discharge Immunity
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
Radiated RF Immunity
EN61000-4-3, 3V/m.
EFT/Burst Immunity
EN61000-4-4, 2kV/5kHz..
Line Surge Immunity
EN61000-4-5, 1kV differential, 2kV common-mode
Conducted RF Immunity
EN61000-4-6, 3Vrms
Power Frequency Magnetic Field Immunity
EN61000-4-8, 3A/m
Voltage Dip Immunity
EN61000-4-11 crit. A, 100Vac 60Hz, 40%/5 cycles with 70% full load.
Line Frequency Harmonics
EN61000-3-2, Class A
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp  6050 King Drive Ventura, CA 93003  Phone 805.486.4565  Fax 858.712.2040  Email: [email protected]  www.slpower.com
MENB1121
Universal Input 120 Watt Series
Medical Switch-Mode Power Supply
Model Number
3 Year Warranty
Volts (V)
Output Current (max)
Max Watts
Ripple (Vp-p max)
MENB1121A1251F01
12 V
10.0 A
120 W
120mV
MENB1121A1551F01
15 V
8.0 A
120 W
150mV
MENB1121A1851F01
18 V
6.6 A
120 W
180mV
MENB1121A2451F01
24 V
5.0 A
120 W
240mV
Model Number Key
MENB 1 120 A 12 51 F 01
Model
Input Connector:
Output Connector:
Output Voltage:
Model
Output Pow er:
# of Outputs
Product Fam ily:
Input Connector Options
Class I (grounded) Inlet:
“F” = IEC60320 C14
Class II (ungrounded) Inlets:
“N” = IEC60320 C8
“Q” = IEC60320 C18
"01" = Standard. "02" and higher indicates a m odified m odel.
"F" = IEC320 C14 grounded. Other options available, see below .
"51" = Molex 39-01-2060. Other options available.
"12" = 12Vdc, "15" = 15Vdc, etc.
"A" = Original Configuration
"150" = 150 Watts
"1" = Single Output
"M" = Medical, "E" = External, "NB" = Model Series Designator
DC Output Connector
Output Connector Options
Pinout
“51” = 6 pin, Molex 39-01-2060 or equiv. Pins 1,4: +Vout
Pins 3,6: -Vout
Pins 2,4: NC
Mating Connector
Molex 39-01-3063
or equiv.
Outline Drawing
1200 ± 50
44.25 ± 1.0
67.4 ± 0.5
Dimensions are in mm.
212.4 ± 0.5
Data Sheet © 2013 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.
Rev. 12-23-2013
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
______________________________________________________________________________________________________________________________ 2 of 2
SL Power Electronics Corp  6050 King Drive Ventura, CA 93003  Phone 805.486.4565  Fax 858.712.2040  Email: [email protected]  www.slpower.com
Similar pages