Ecliptek ECCM2T-S-30000MTR 2.5mmceramic surface mount crystal Datasheet

Marketing Bulletin
DATE:
Saturday, May 01, 1999
TO:
Affected Customers
FROM:
Marketing
RE:
ECCM2 Series Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the ECCM2 series
Ecliptek crystal effective Saturday, May 01, 1999.
In compliance with our End of Life (EOL) policy, this notice will serve as advanced
notice of product termination. New orders will not be accepted after Saturday, May 01,
1999, with delivery to be conclude by Saturday, May 01, 1999.
If there are any questions pertaining to this bulletin, please contact your Ecliptek sales
representative. Thank you again for your cooperation.
Ecliptek Marketing
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
STANDARD SPECIFICATIONS
Frequency Range:
Frequency Tolerance/Stability:
Blank
J
Shunt Capacitance (Co)
Load Capacitance (CL)
Blank
XX
S
Mode of Operation
Blank
T
Storage Temperature
Drive Level
Aging @ 25°C
Insulation Resistance
3.579545MHz to 70.000MHz
Shock:
Vibration:
Seal Integrity:
Solderability:
Marking Permenancy:
Conditions and
Conditions and
Conditions and
Conditions and
Conditions and
±50ppm at 25°C, ±100ppm over -10°C to +60°C
±30ppm at 25°C, ±50ppm over -10°C to +60°C
7pF Maximum
18pF Standard
CL ≥ 12pF
Series
Fundamental from 3.579545MHz to 30.000MHz
Third Overtone from 30.000MHz to 70.000MHz
-30°C to +85°C
1 mWatt Maximum
±5ppm/year Maximum
500 Megaohms Minimum at 100Vdc
ENVIRONMENTAL & MECHANICAL
Criteria
Criteria
Criteria
Criteria
Criteria
Listed
Listed
Listed
Listed
Listed
in TQC41-883-007
in TQC41-883-008
in TQC41-883-003
in TQC41-883-004 / 95% coverage
in TQC41-883-001
FREQUENCY VS. EQUIVALENT SERIES RESISTANCE (ESR Ohms Maximum)
Frequency Range
3.579 - 3.999
4.000 - 4.999
5.000 - 6.999
ALL DIMENSIONS
IN MILLIMETERS
ESR
150
130
80
Frequency Range
7.000 - 9.999
10.000 - 14.999
15.000 - 23.999
Frequency Range
24.000 - 30.000
30.000 - 70.000 (3rd)
ESR
60
45
30
5.08
MAX
2.0 ±0.1
11.0
MAX
10.0
±0.1
ESR
30
100
PAD
CONNECTION
4.88
±0.10
1.0 ±0.1
2.50
MAX
3.90
±0.10
PART NUMBERING GUIDE
ECCM2 J T - 20 - 30.000M TR
MARKING GUIDE
Packaging Options
Blank = Bulk
TR = Tape & Reel (CPA70-071-000)
EXX.XXX
Frequency in MHz
EXX.XXX
Frequency
Load Capacitance
Blank = 18pF (Standard)
S = Series
XX = XXpF
Note: Marking shall conform to conditions listed in
TQC41-001-000.
SPECIFICATION CONTROL DRAWING
Mode of Operation
Blank = Fundamental
T = Third Overtone
Frequency Tolerance/Stability
Blank = ±50ppm at 25°C, 100ppm over -10°C to +60°C
J = ±30ppm at 25°C, 50ppm over -10°C to +60°C
Drawing Number
CCR30-002-000
Title
2.5mm Ceramic Surface Mount Crystal
Revision
Effectivity Date
B
ECN Number
1858
Approved By
PAGE 1 OF 1
Date Released By
Date
Similar pages